• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.110-121
• /
• 2016

The primary aim of the color constancy algorithm is to estimate illuminant chromaticity. There are various statistical-based, learning-based and combinational-based color constancy algorithms already exist. However, the statistical-based algorithms can only perform well on images that satisfy certain assumptions, learning-based methods are complex methods that require proper preprocessing and training data, and combinational-based methods depend on either pre-determined or dynamically varying weights, which are difficult to determine and prone to error. Therefore, this paper presents a new optimization based illuminant estimation method which is free from complex preprocessing and can estimate the illuminant under different environmental conditions. A strong color cast always has an odd standard deviation value in one of the RGB channels. Based on this observation, a cost function called the degree of illuminant tinge(DIT) is proposed to determine the quality of illuminant color-calibrated images. This DIT is formulated in such a way that the image scene under standard illuminant (d65) has lower DIT value compared to the same scene under different illuminant. Here, a swarm intelligence based particle swarm optimizer(PSO) is used to find the optimum illuminant of the given image that minimizes the degree of illuminant tinge. The proposed method is evaluated using real-world datasets and the experimental results validate the effectiveness of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2150-2159
• /
• 2014

This study was designed to investigate the status of orthodontic treatment and facial plastic surgery among 389 patients who visited dental clinics located in Seoul and Gyeonggi Province. After the collection of data, an analysis was carried out using a spss statistical program. The analysis results are as follows. the level of satisfaction with orthodontic treatment from patients with experience of the orthodontic treatment turned out to be high(p<0.01). Women considered 3.01 to 4 million won to be reasonable cost for orthodontic treatment (p<0.05), which is higher cost recognized by men, and patients with experience of orthodontic treatment recognized 19 to 24 months as the proper orthodontic treatment period(p<0.01). In addition, women showed higher figures than men in their awareness on the need for orthodontic treatment checkups(p<0.001), and facial plastic surgery experience (p<0.01). With respect to the part of the face on which they hoped to have plastic surgery, eye plastic surgery was higher in women (p<0.01), and nose surgery turned out to be higher in patients with experience of orthodontic treatment(p<0.05). Meanwhile, women considered the eye as the most important part among other facial areas (p<0.001), and they recognized that dentist should perform plastic surgery on both jaws among facial areas(p<0.01). In conclusion, the dental medical staff should provide consultations and operate treatment systems in consideration of gender differences and needs of dental patients. In the case of orthodontic treatment for the improvement of facial appearance, especially double jaw surgery which is closely related to the oral function, professional dental medical staff needs to perform the operation, considering the special oral environment. In addition, it is determined that provision of relevant medical information and promotion of dental service is required to provide patients with correct knowledge about orthodontic treatment and facial plastic surgery.

• Journal of Korea Water Resources Association
• /
• v.44 no.10
• /
• pp.777-786
• /
• 2011

In the previous researches for storm sewer design, the flow path, pipe diameter and pipe slope were determined to minimize the construction cost. But in the sewer networks, the flows can be changed according to flow path. The current optimal sewer layout models have been focussed on satisfying the design inflow for sewer designs, whereas the models did not consider the occurrences of urban inundation from excessive rainfall events. However, in this research, the sewer networks are determined considering the superposition effect to reduce the inundation risk by controlling and distributing the inflows in sewer pipes. Then, urban inundation can be reduced for excessive rainfall events. An Optimal Sewer Layout Model (OSLM) was developed to control and distribute the inflows in sewer networks and reduce urban inundation. The OSLM uses GA (Genetic Algorithm) to solve the optimal problem for sewer network design and SWMM (Storm Water Management Model) to hydraulic analysis. This model was applied to Hagye basin with 44 ha. As the applied results, in the optimal sewer network, the peak outflow at outlet was reduced to 7.1% for the design rainfall event with 30 minutes rainfall duration versus that of current sewer network, and the inundation occurrence was reduced to 24.2% for the rainfall event with 20 years frequency and 1 hour duration.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2012

In the current construction planning and designing process, an architectural miniature model was designed to verify the interior or exterior spatial sense of a building structure, but building of the miniature model is demand much more effort and time; in addition to this it has limitation to identify interior information of the building. For a complement of it, CAD would be used in the existing planning and designing process to visualize the building information, but its visualization is not satisfactory for the 3D volume which could be easily verified with the miniature model. CAD is the specific software for designing building structures and the 3D results are usually rendered on 2D monitor screen. Therefore, there is a shortage of cognitive immersion for the 3D space. In this paper, we introduce the conversion process of BIM shape data into the Augmented Reality contents by using a series of softwares. As a result of modification on construction plan or design we reduced the cost and time to reconstruct the final visualization. We have shown that the interior or exterior information of the building structures are easily visualized with BIM shape data on augmented reality environment. Several proposed interaction methods, such as rem oval of building components, and slice-cut operation, provide the user for the effective manipulation of models on the augmented reality environment.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.77-87
• /
• 2020

This study aims to suggest basic data for developing forest product in Jeongeup City by surveying and analyzing consumer awareness and purchasing behavior. A survey was conducted focusing on local tourist attractions in Jeongeup City, and the analysis was conducted on 234 people. Among the local specialty processed products that the survey participants had experience in purchasing, food was mainly tea, concentrate solution, liquor, snacks and fruit syrup/enzyme. The therapy was shown in order of soap, aroma oil, and lotion. It was found that the purchase cost was more than 10,000 won and less than 30,000 won. Major purchase uses were for direct use and gifts, and 56.8% of the customers were satisfied with the satisfaction of the products, which were found to be purchased because of their good quality, good gift, and good health functions. In the question of 11 kinds of forest products, the subjects were aware of bokbunja, balloon flower, wild flower, deodeok, bracken, durum, and mal, among which bokbunja and wild flower were recognized as the representative forest products of Jeongeup. A cluster of food and therapy product selection attributes was analyzed to find target consumers. As the group that is interested in forest products and values the safety and quality of products is highly recognized, the value of forest products should be increased in consideration of the quality and safety of forest products when developing products in the future.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.123-130
• /
• 2016

With the development of fast construction mode in shipbuilding market, the demand on accuracy management of hull is becoming higher and higher in shipbuilding industry. In order to enhance production efficiency and reduce manufacturing cycle time in shipbuilding industry, it is important for shipyards to have the accuracy of ship components evaluated efficiently during the whole manufacturing cycle time. In accurate shipbuilding process, block accuracy is the key part, which has significant meaning in shortening the period of shipbuilding process, decreasing cost and improving the quality of ship. The key of block accuracy control is to create a integrate block accuracy controlling system, which makes great sense in implementing comprehensive accuracy controlling, increasing block accuracy, standardization of proceeding of accuracy controlling, realizing "zero-defect transferring" and advancing non-allowance shipbuilding. Generally, managers of accuracy control measure the vital points at section surface of block by using the heavy total station, which is inconvenient and time-consuming for measurement of vital points. In this paper, a new measurement method based on point clouds technique has been proposed. This method is to measure the 3D coordinates values of vital points at section surface of block by using 3D scanner, and then compare the measured point with design point based on ICP algorithm which has an allowable error check process that makes sure that whether or not the error between design point and measured point is within the margin of error.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.2
• /
• pp.81-99
• /
• 2014

This study is carried out to find out Chinese cabbage price sensitivity of consumer. Even though Chinese cabbage is the most important vegetable in our country, the price fluctuation continues to be changed ever year. However, there was no price criteria which is low, high, optimum price level for stabilization policies. In this paper, we investigated urban consumer price sensitivity by using the price sensitivity measurement(PSM), and then suggest to farmer and policy maker the results. The purchasing attribute Chinese cabbage of consumer will be provided to farmer. Optimal willingness to pay price of Chinese cabbage was analyzed between 1,991~2,018 won per head. If the consumer price were formated that price range, the costs will be able to satisfied both producers and consumers. The consumer's acceptable price range was from lower price (PMC) 1,472 won to the upper limit price of 2,714 won (PME). So when the market price researched above 2,714 won, import should be considered. The most important attribute when purchasing was a taste of cabbage, and he most suitable size was 3kg per head.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.221-232
• /
• 2016

The impact of the recent small business start-up competition in the market, has become overheated. It is effected by early retirement of a generation of youth employment. This study is a study on the impact of SEMAS(Small Enterprise and Market Service) system operating of the funding system, education support programs, and consulting support system on the business performance of small business owners. It has surveyed 272 business owners, in Gyeongsangnam-province. The study includes specific support system for usage frequency and satisfaction and conducted from January 2013 to September 2015. In addition, it analyzes characteristic that motivation, business model, item, owner's experience, sales and demographic by small business owner. Analysis results, the management performance of small business that uses financial support system and consulting support system is shown to be high. But education support system is the opposite effect. As a result, the management performance is related to industry experience. Therefore education support system need to be reorganized to the support depends on the development stage. This study was conducted to help small business owners entered the start-up market and a decision-making person with a policy decision.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.58-65
• /
• 2015

For the rehabilitation of fully edentulous patients, implant-supported removable partial dentures can be considered as one of the treatment options with complete dentures or implant-supported overdentures. If removable partial dentures are used in combination with a small number of implants placed in strategically important positions, it can offer additional stability, retention and support through implants and reduce a burden of surgical procedures compared with fixed implant-supported prostheses with extensive implant placement. Moreover, the economical benefit can be expected as well. The purpose of this case report is to present a treatment in which an implant-supported removable partial denture was fabricated considering residual alveolar bone status and demands after teeth loss in a patient who had been using a distal extension removable partial denture for a long period of time. In anterior area, fixed prostheses were fabricated with implant placement and in posterior area, short implants provide only support for the removable partial denture. In addition, denture base and clasp were made of thermoplastic acrylic resin. Finally, functionally and aesthetically satisfying treatment results can be achieved.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.375-383
• /
• 2018

Clinicians are faced with many difficulties when planning prosthodontic restorations with implants in a complete edentulous patient. When planning fixed implant prosthetics, it is often necessary to have additional surgery due to highly reduced alveolar bone, as well as high treatment costs and long-term treatment durations can be required. In addition, lack of interocclusal space can be a problem when planning implant supported overdentures. In this study, we planned to place a small number of implants on the anterior maxilla and used them as the abutments for distal-extension removable partial dentures on the posterior side in a maxillary fully edentulous patient. This would reduce the possibility of additional invasive operations such as alveolar bone graft, shorten the treatment time, and be relatively easy for elderly patients to burden. In this case, the patient was provided with a distal-extension removable partial denture and anterior implant fixed prostheses, which was similar to the previous one, and showed good adaptation, and chewing efficiency and esthetics was recovered.