• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.103-106
• /
• 1997

In order to establish a micropropagation system of Naricissus, the ability of bulblet regeneration among propagation materials was compared, and the adequate growth regulators and concentrations for each cultivar were investigated. The inorganic components were also assayed in the parts of propagation materials. In propagation materials, scape with based plates showed hightest rate of bulblet formation and rapid growth of formed bulblets in vitro, comparing to other parts of it. In comparing of varieties, 'Dutch Master' and 'Golden Harvest' showed a high ability for bulblet regeneration. The ability of bulblet regeneration was most favorable in the medium, supplemented with 5.0 mg/L BA and 2.5 mg/L NAA in 'Dutch Master', and 5.0 mg/L BA and 1.0mg/L NAA in 'Golden Harvest', respectively. In inorganic component analysis of propagation materials, the White part of scape contained 1.18 mg/L$P_2O_5$, 2.57 me Ca, 0.94 me Mg and 3.20 mg/L total N. It showed higher levels in concentration of inorganic components as compared to those of the other part of scape. In addition, leaves and yellow part of scape contained significantly high levels of Ca and Mg while scales bulb showed considerably low levels in all inorganic compounds.

• Membrane Journal
• /
• v.20 no.1
• /
• pp.21-28
• /
• 2010

Organic/inorganic composite electrolyte membranes were prepared for dye sensitized solar cell (DSSC). Poly (ethylene glycol) (PEG)s with various molecular weight (600, 1,500, 2,000 and 3,400) were ethoxysilated to fabricate organic/inorganic composite materials through sol-gel processes. The electrolyte membranes were produced by doping the composite materials with KI and $I_2$, and their ionic conducting behaviors were investigated. The ionic conductivity of the composite membrane was highly affected by PEG molecular weight. The highest conductivity was shown by the composite membrane prepared with PEG with the molecular weight of 2,000. The composite electrolyte membranes showed considerable improvement of ionic conductivity. Compared to PEO electrolyte membranes, the composite electrolyte membrane by PEG, MW 2,000 showed much higher ionic conductivity.

• The Korean Journal of Mycology
• /
• v.13 no.4
• /
• pp.235-241
• /
• 1985

The present study was designed to investigate biosynthetic patterns of polysaccharides under catabolic repression and derepression in Saccharomyces uvarum. Correlation coefficients between polysaccharide synthesis and polyphosphate accumulation were examined, according to the culture phase and under various phosphate concentrations (free, limited, sufficient). During catabolic derepression, biosynthesis of glycogen was enhanced. rapidly and highly in the cells grown on minimal medium, compared with those grown on the complete medium. Acid soluble glycogen type was the main component of total glycogen and alkali soluble glycogen was synthesized in small amount, after 24 hr culture, at the time of almost exhaustion of sugar in the medium. Total glycogen was accumulated highly in proportion to the amount of phosphate added to the medium. It could be postulated that type 'C' isoenzyme among ALPase was directly or indirectly correlated with the glucan synthesis. Mannan synthesis indicated maximal amount at the early exponential phase and stationary phase, and also acid soluble sugars at the stationary phase. Correlation coefficient between the mannan synthesis and poly-p-'C' accumulation, and also between mannan synthesis and phospholipid content indicated 0.866 and 0.726, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2451-2456
• /
• 2011

Inorganic micropowder(Ce500)-filled polyurethane composite foams were fabricated and the effects of postcure on the mechanical properties were studied by the measurement of polymerization temperature, TGA, and UTM test. Temperature for the maximum reaction rate of 20wt% Ce500-filled sample reached upto ca. $100^{\circ}$ within 10min. and, for the same sample, double mode thermal decomposition was observed around two distinguished temperatures of $250^{\circ}$ and $350^{\circ}C$. The activation energies for the decomposition were calculated using Kissinger method as 117.4 and 139.4 kJ/mol, respectively. While break strength and hardness of the sample seemed nearly affected by postcure time at $160^{\circ}C$, elongation, however, was significantly changed upto 1.72 times after 7hrs treatment. As the results, the condition of 7hrs at $160^{\circ}$ was considered as the optimum postcure condition for the Ce500-filled PU composite foam samples.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.224-224
• /
• 2003

광통신을 위한 구성 요소는 빛을 발생시키는 발광소자, 빛을 검출하는 수광소자 그리고 광신호를 처리하는 광신호처리 소자로 구성된다. 이때 각 소자간 광전송과 광소자에 의한 광 신호 처리 과정에서 광전송 손실이 심각하게 일어나 광정보를 상실하게 되므로 각 요소별로 광신호 증폭이 반드시 필요하다. 뿐만 아니라 완전 광화에 의한 초고속/대용량 광통신망의 구축에는 저가이며, 광집적화가 가능한 광도파로형 광증폭기가 요구되고 있다. 짧은 거리에 높은 증폭 효율을 얻기 위한 광도파로형 광증폭기를 구현하기 위해서는 광통신 파장대인 1.55$\mu\textrm{m}$ 대역의 증폭이 가능한 Er 이온을 고농도로 도핑 할 필요가 있다. 그러나 Er 이온을 단순히 고농도로 첨가하면 Er-Er 간 뭉침 현상에 의해 더 이상의 증폭이 어렵게 된다. 본 연구에서는 이러한 문제를 해결하면서 스핀 코팅이 가능하여 저가 공정이 가능한 유/무기 졸-겔 재료 내에 Er 이온을 제어된 방법으로 첨가하고 그 결합 환경을 FT-IR 및 $^{17}$ O-NMR로 분석하였다. 유/무기 졸겔 재료 제조를 위하여 먼저 MPTS(MethAcryoxyPropylTrimethoxySilane)를 부분 가수분해한 후 ZrOCl$_2$.8$_2$O (Zirconyl Chloride Octahydrate) 와 ErCl$_3$. 6$H_2O$ (Erbium(III) Chloride Hexahydrate)를 순차적으로 결합시키고, Zr/MPTS 및 Zr/Er의 첨가비에 따른 발광 특성을 PL(photoluminescence) 스팩트럼으로 분석하여 Er 이온의 주위 결합 환경이 PL에 미치는 영향을 조사하였다. 또한 Si 기판에 코팅한 Er이 도핑된 유/무기 하이브리드 졸-겔 코팅막의 굴절율 등 광도파로 재료로서의 특성도 프리즘 커플러 등을 이용하여 조사하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.985-1001
• /
• 2018

In this study, we tried the various experiments using the emulsifier, electrolyte, stabilizer and gelling agent in order to improve a stability of low viscosity W/O emulsion. As a result, when we used polyglyceryl-4 diisostearate/polyhydroxystearate/sebacate as a main emulsifier, PEG-30 dipolyhydroxystearate and cetyl PEG/PPG-10/1 dimethicone as a co-emulsifier for stable emulsification system, 0.5 % sodium chloride as an electrolyte, 1 % distearyldimonium chloride as a stabilizer, 0.5 % glyceryl behenate/eicosadioate as an oil gelling agent, emulsion particle is the best. Also, we got the stable and low viscosity W/O emulsion maintained at a constant viscosity at 2,000 cps or less. In addition, we were able to examine the possibility of development of low viscosity fluids type sunscreens with excellent feeling and stability through the application of inorganic sunscreen agents.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.345-353
• /
• 2008

Organic/inorganic composite electrolyte membranes were prepared for dye sensitized solar cell (DSSC). Polyethylene Glycol (PEG)s with various molecular weight (400, 600, 1,500 and 3,400) was ethoxysilated to fabricate organic/inorganic composite materials through sol-gel processes. The electrolyte membranes were produced by doping the composite materials with NaI and $I_2$, and their ionic conducting behavior was investigated. The ionic conductivity of the composite electrolyte was highly affected by the PEG molecular weight, and the highest conductivity was shown by the composite membrane prepared with PEG with the molecular weight of 1,500. The composite electrolyte membranes showed considerable improvement of ionic conductivity. Compared to PEO electrolyte membranes, the composite electrolyte membrane prepared by PEG, MW 1,500, showed much higher ionic conductivity.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1236-1241
• /
• 2007

The feasibility of soil washing was investigated in the laboratory to treat heavy metals-contaminated railway soil. Various organic acids including ethylene diamine tetraacetic acid (EDTA) and citric acid as well as inorganic acids such as hydrochloric acid (HCl) and phosphoric acid were tested to evaluate washing efficiency. Generally, inorganic acid showed higher removal efficiency compared to organic acids. Specially, EDTA, which are well known as most effective washing agent to remove heavy metals from soil, was not efficient to remove heavy metals in this study. Among washing agents tested in this study, HCl was most effective. The removal of Cd, Cu, and Pb was high, however, that for Zn and Ni was less than 30% with 0.5 M HCl. This difference comes from analytical methods (Korean Standard Test Method for Soil). Aqua regia was used to extract Zn and Ni, however 0.1 N HCl was used for other metals. As a result, simple washing technology is not effective, to treat railway contaminated soil with heavy metals.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.1
• /
• pp.1-10
• /
• 1996

뇌졸중이라고 진단된 입원 환자 26명을 대상으로 3일동안 섭취한 식이와 24시간 뇨와 혈액을 수집하고 혈압을 측정하여 나트륨, 칼륨, 캄슘, 마그네슘의섭취 수준에 다른 뇨중 배설량과 혈중 수준을 관찰하고 이들과 혈압과의 관계를 알아봄으로써 뇌졸중 환자를 포함한 고혈압 관리의 치료식이를 제공하는데 기초자료로 사용하고자 실시간 연구결과를 요약하면 다음과 같다. 1. 대상자들의 평균 연령은 남녀 각각 52.6세, 58.5세였으며 평균 BMU는 남녀 각각 21.6, 22.4였다. 입원 당시 평균 혈압은 남녀 각각 147.3/90.9mmHg, 162.7/102.0mmHg였고, 실험 종료일의 평균 혈압은 남자의 경운 124.6/80.8mmHg 였고 여자 대상자는 137.7/91.3mmHg 였다. 2. 1일 평균 나트륨, 칼륨, 칼슘, 마그네슘의 섭취 향은 96.7$\pm$30.7mEq,64.8$\pm$19.0mEq, 431.3$\pm$227.1mg, 333.9$\pm$145.9mg이었다. 3. 1일 평균 뇨중 나트륨, 칼륨, 칼슘, 마그네슘의 배설량은 76.7$\pm$28.2mEq, 33.9$\pm$16.6mEq, 65.6$\pm$34.0mg, 96.5$\pm$58.0mg이었다. 4. 평균 혈청내 나트륨, 칼륨, 칼슘, 마그네슘의 함량은 137.8$\pm$4.3mEq/l, 3.7$\pm$0.5mEq/l, 7.6$\pm$0.8mg/dl, 2.2$\pm$0.2mg/dl로써 칼슘 농도가 정상수준에 비해 비교적 낮은 것으로 나타났다. 5. 혈압과 무기질과의 관계에서 수축시 혈압의 증가시 뇨중 칼륨 배설이 증가함으로써 수축기 혈압과 뇨중 칼륨 배설량 사이에 유의적인 부의 상관관계가 나타났다. (p<0.05). 이상과 같은 입원중인 뇌졸중 환자의 뇨중 나트륨과 칼륨의 배설률 및 혈청과 뇨중 칼슘 배설수준이 정상인 보다 낮은 수준이었으며, 칼륨은 뇌졸중 환자의 혈압관리에 효과적이 무기질로 작용할 가능성이 보여지므로 고혈압관리를 위한 식사 처방시 이들 무기질에 대한 고려가 있어야 할 것으로 사료된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.387-390
• /
• 1985

The effect of extracting conditions on the content of inorganic compounds of red ginseng extract was studied with respect to the change in ethanolic concentration ranges of $0{\sim}90%$ and temperature of $70{\sim}100^{\circ}C$ during $1{\sim}5$ times of extraction. Each extraction time was taken 8 hours at given temperature. Little effect of temperature on inorganic compounds was observed, while higher ethanol concentrations, particularly higher than 70%, were resulted a significant decreased in their contents. The yield of inorganic compounds in water was shown 80% over after 3rd extraction, while content of crude ash was observed similar tendency and their contents were significant increased in water than in 70% ethanolic concentration. In the process of extraction with water, 1.55% of the potassium content was the highest value, and the smallest was 11ppm of the copper. But in the extraction ratio to raw mateirls, the highest ratio was 91.4% of the calcium, and smallest was 30.4.% of the magnesium.