• Title/Summary/Keyword: 비교처리과정

Search Result 2,464, Processing Time 0.03 seconds

On the vibration influence to the running power plant facilities when the foundation excavated of the cautious blasting works. (노천굴착에서 발파진동의 크기를 감량 시키기 위한 정밀파실험식)

  • Huh Ginn
    • Explosives and Blasting
    • /
    • v.9 no.1
    • /
    • pp.3-13
    • /
    • 1991
  • The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

  • PDF

A Study on the Excavated Sab(a funeral fan) from Lime-filled Tomb and Lime-layered Tomb during the Joseon Dynasty (조선시대 회격·회곽묘 출토 삽(翣)에 대한 고찰)

  • Yi, Seung Hae;An, Bo Yeon
    • Korean Journal of Heritage: History & Science
    • /
    • v.41 no.2
    • /
    • pp.43-59
    • /
    • 2008
  • Sap(?, a funeral fan) is a funeral ceremonial object used in association with a Confucian ceremonial custom, which was crafted by making a wooden frame, attaching a white cloth or a thick paper onto it, drawing pictures on it, and making a holder for a handle. According to Liji(Records of Rites), Sap was used since the Zhou Dynasty, and these Chinese Sap examples are no big different than the Korean Sap examples, which were described in Joseon Wangjo Sillok(Annals of the Joseon Dynasty), Gukjo Oryeui(the Five Rites of the State), and Sarye Pyeollam(Handbook on Four Rituals). This study explored Sap excavated in lime-filled tombs and lime-layered tombs of aristocrats dating back to Joseon, as well as their historical records to examine Sap's characteristics according to their examples, manufacturing methods, and use time. The number and designs of Sap varied according to the deceased' social status aristocrats used mainly one pair of 亞-shaped Bulsap, and a pair of Hwasap with a cloud design depicted on it. A Sap was wrapped twice with Chojuji paper or Jeojuji paper, and for the third time with Yeonchangji paper. Then, it was covered with a white ramie, a hemp, a cotton, a silk satin, etc. Bobul(an axe shape and 亞-shape design) was drawn on both sides of Sap, and a rising current of cloud was drawn at the peripheral area mainly with red or scarlet pigments. Sap, which were excavated from aristocrats'lime-filled and lime-layered tombs, are the type of Sap which were separated from its handle. These excavated Sap are those whose long handles were burnt during the death carriage procession, leaving Sap, which later were erected on both sides of the coffin. The manufacturing process of excavated relics can be inferred by examining them. The excavated relics are classified into those with three points and those with two points according to the number of point. Of the three-point type(Type I), there is the kind of relic that was woven into something like a basket by using a whole wood plate or cutting bamboo into flat shapes. The three-point Sap was concentrated comparatively in the early half of Joseon, and was manufactured with various methods compared with its rather unified overall shape. In the meantime, the two-point Sap was manufactured with a relatively formatted method; its body was manufactured in the form of a rectangle or a reverse trapezoid, and then its upper parts with two points hanging from them were connected, and the top surface was made into a curve(Type II) or a straight line(Type III) differentiating it from the three-point type. This manufacturing method, compared with that of the three-point type, is simple, but is not greatly different from the three-point type manufacturing method. In particular, the method of crafting the top surface into a straight line has been used until today. Of the examined 30 Sap examples, those whose production years were made known from the buried persons'death years inscribed on the tomb stones, were reexamined, indicating that type I was concentrated in the first half of the $16^{th}$ century. Type II spanned from the second half of the $16^{th}$ century to the second half of the $17^{th}$ century, and type III spanned from the first half of the $17^{th}$ century to the first half of the $18^{th}$ century. The shape of Sap is deemed to have changed from type I to type II and again from type II to type III In the $17^{th}$ century, which was a time of change, types II and III coexisted. Of the three types of Sap, types II and III re similar because they have two points; thus a noteworthy transit time is thought to have been the middle of the $16^{th}$ century. Type I compared with types II and III is thought to have required more efforts and skills in the production process, and as time passed, the shape and manufacturing methods of Sap are presumed to have been further simplified according to the principle of economy. The simplification of funeral ceremonies is presumed to have been furthered after Imjinwaeran(Japanese invasion of Joseon, 1592~1598), given that as shown in the Annals of King Seonjo, state funerals were suspended several times. In the case of Sap, simplification began from the second half of the $16^{th}$ century, and even in the $18^{th}$ century, rather than separately crafting Sap, Sap was directly drawn on the coffin cover and the coffin. However, in this simplification of form, regulations on the use of Sap specified in Liji were observed, and thus the ceremony was rationally simplified.

Biostatic activity of Coix lacryma seed extract on Toxoplasma gondii in macrophages (율무씨 수침 추출물이 대식세포내 톡소포자충에 미치는 영향에 관한 실험적 연구)

  • 소진탁;김숙향
    • Parasites, Hosts and Diseases
    • /
    • v.34 no.3
    • /
    • pp.197-206
    • /
    • 1996
  • Water extract of Coix locrvmn seeds (Co-Ex) was separated into several components; dissolved with Tris-Cl buffer and the supernatant (WC 1), ammonium sulfate treatment supernatant (WC2) and the pellet nvc31,9AE column chromatography of WC 1 and the peak portions; WC4, WCS and WC6. Murine peritoneal macrophages in DMEM containing 10% heat-inactivated FCS were infected with tachyzoites of ToxopIQsmc gondii, RH strain, in uifo. By adding modulators such as Co-Ex, WC 1,2,3,4.5,6 and LPS or IFN-γ for 24 hrs . toxoplasmastatic activity of macrophages was examined in relation to nitrite production. Nitrite production of macrophages was enhanced especially in the series of WC2, WC1 and the combination sample (WC1 + WC2 + WC3) by order than other components or fractions (WC4, WC5, WC6) tested . Toxoplasmastatic actions such as percentage of the inacrophages infected by T. gonnii and fold increase of T gondii in macrophages showed retroverse relations with the amount of nitrite production; i.e. as nitric oxide (NO) increased the phagocytic index of macrophages and the fold increase of tachyzoites in macrophages decreased . Nitrite (NO-2) production was increased by adding IFN-γ in all cases together with enhancement of biostatic effects. Through the results obtained, it is speculated that some components other than the non-proteinous and defatted components in Coix lacrwmn seeds may contribute to activate macrophages through induction of NO for the biostatic activity.

  • PDF

Real-time Color Recognition Based on Graphic Hardware Acceleration (그래픽 하드웨어 가속을 이용한 실시간 색상 인식)

  • Kim, Ku-Jin;Yoon, Ji-Young;Choi, Yoo-Joo
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.14 no.1
    • /
    • pp.1-12
    • /
    • 2008
  • In this paper, we present a real-time algorithm for recognizing the vehicle color from the indoor and outdoor vehicle images based on GPU (Graphics Processing Unit) acceleration. In the preprocessing step, we construct feature victors from the sample vehicle images with different colors. Then, we combine the feature vectors for each color and store them as a reference texture that would be used in the GPU. Given an input vehicle image, the CPU constructs its feature Hector, and then the GPU compares it with the sample feature vectors in the reference texture. The similarities between the input feature vector and the sample feature vectors for each color are measured, and then the result is transferred to the CPU to recognize the vehicle color. The output colors are categorized into seven colors that include three achromatic colors: black, silver, and white and four chromatic colors: red, yellow, blue, and green. We construct feature vectors by using the histograms which consist of hue-saturation pairs and hue-intensity pairs. The weight factor is given to the saturation values. Our algorithm shows 94.67% of successful color recognition rate, by using a large number of sample images captured in various environments, by generating feature vectors that distinguish different colors, and by utilizing an appropriate likelihood function. We also accelerate the speed of color recognition by utilizing the parallel computation functionality in the GPU. In the experiments, we constructed a reference texture from 7,168 sample images, where 1,024 images were used for each color. The average time for generating a feature vector is 0.509ms for the $150{\times}113$ resolution image. After the feature vector is constructed, the execution time for GPU-based color recognition is 2.316ms in average, and this is 5.47 times faster than the case when the algorithm is executed in the CPU. Our experiments were limited to the vehicle images only, but our algorithm can be extended to the input images of the general objects.

Curvature stroke modeling for the recognition of on-line cursive korean characters (온라인 흘림체 한글 인식을 위한 곡률획 모델링 기법)

  • 전병환;김무영;김창수;박강령;김재희
    • Journal of the Korean Institute of Telematics and Electronics B
    • /
    • v.33B no.11
    • /
    • pp.140-149
    • /
    • 1996
  • Cursive characters are written on an economical principle to reduce the motion of a pen in the limit of distinction between characters. That is, the pen is not lifted up to move for writing a next stroke, the pen is not moved at all, or connected two strokes chance their shapes to a similar and simple shape which is easy to be written. For these reasons, strokes and korean alphabets are not only easy to be changed, but also difficult to be splitted. In this paper, we propose a curvature stroke modeling method for splitting and matching by using a structural primitive. A curvature stroke is defined as a substroke which does not change its curvanture. Input strokes handwritten in a cursive style are splitted into a sequence of curvature strokes by segmenting the points which change the direction of rotation, which occur a sudden change of direction, and which occur an excessive rotation Each reference of korean alphabets is handwritten in a printed style and is saved as a sequence of curvature strikes which is generated by splitting process. And merging process is used to generate various sequences of curvature strikes for matching. Here, it is also considered that imaginary strokes can be written or omitted. By using a curvature stroke as a unit of recognition, redundant splitting points in input characters are effectively reduced and exact matching is possible by generating a reference curvature stroke, which consists of the parts of adjacent two korean alphasbets, even when the connecting points between korean alphabets are not splitted. The results showed 83.6% as recognition rate of the first candidate and 0.99sec./character (CPU clock:66MHz) as processing time.

  • PDF

Effects of Sowing Date on Grain Filling and Related Traits in Winter Barley (파종기 차이가 보리의 등숙과 등숙관련 형질에 미치는 영향)

  • 류용환;이창덕;하용웅
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.37 no.1
    • /
    • pp.93-103
    • /
    • 1992
  • Experiments were conducted in the research field of the Wheat and Barley Research Institute with three barley cultivars, Olbori, Kangbori and Suwon 18, which showed different growth characteristics. The highest rates of daily dry matter accumulation in grains were 1.03 1.94 mg / grain / day in early and optimum sowings and 0.88 1.88 mg / grain / day in late sowings, which occurred around 20~30 days after heading in early and optimum sowings and 15~20 days after heading in late sowings. Grains reached their maximum weight by 40 days after heading in early and optimum sowings and 35 days after heading in late sowings. Total sugar content in grains followed a pattern of linear increase immediately after heading, but it started to decrease around 20 days after heading. On the other hand, starch content continued to increase until maturity. The contents of both components were high in the order of 'Olbori' > 'Kangbori' > 'Suwon 18', but they did not respond in a regular pattern to different sowings. 1,000 grain weight showed highly significant positive correlation(r=0.767$^{**}$) with the duration of grain growth, but it had negative correlations with the average (r=-0.548$^{**}$) or the sum (r=-0.595$^{**}$) of post-anthesis daily mean temperature.ature.

  • PDF

Effective Customer Risk Management at the Nuclear Medicine Department: Risk Managemont MOT Development Application and Producing Public Relations Film (핵의학과 내에서의 효과적인 고객위험관리: 위험관리 응대 MOT 개발적용 및 홍보동영상 제작)

  • Ham, Jong-Hum;Hwang, Jae-Bong;Kim, Joon-Ho;Lee, Gui-Won
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.13 no.3
    • /
    • pp.110-122
    • /
    • 2009
  • Purpose: Nowadays, A medical institution assesment could get more interest about a quality of medical services from many hospitals that developed the active activities for improving medical services. Also, there is an other additional issue which is the patients risk management. Uijeongbu ST. Mary's hospital Nuclear Medicine department has been changed many work process after PET-CT introduction and renovation of its place since 2008. Therefore, modified structure and the way of existing work process have contained risk factors. The purpose of this study would be the appropriate risk management process while imaging examination process, the removal risk factors and improved activities through the analysis risk factors. Materials and Methods: Nuclear Medicine department new process should analysis through many-sided, Firstly, make and trained risk management manual after then apply an actual work. Result analysis showed the number of risk accident occurrence that comparing the last year and after the improved activities. Secondly, producing risk management public relations film has been showed an applicable patient after then the customer service measurement checked for a hundred patient by questionnaire. Lastly, Risk factors were eliminated through the facilities participation improving activities which could change for the better risk factors. Results: The number of safety accident occurrence(medication error, fall and collision) were checked as zero after the improving activities both PET-CT and gamma camera examination. The results of questionnaire showed as follows; 74% marked as understanding of the test process and 81% checked "satisfaction" after the public relations film showing. The question "Did you consider about the risk factors?", both PET-CT and gamma camera checked as 94% and 89% respectively. Customer risk management could be accomplished effectively through the improving activities at the nuclear medicine department. Conclusions: The study would be an opportunity that spread risk factors were systematically showed and analyzied. Also, It showed the possibility of the minimized safety accident and its feedback, if application of the response manuel that could be a standard of radiology technician's work method to react safety accident. It was the more effective that visual material could be easy to approach as a methodology of risk factors. As far as I have concerned that It could help the safety and convenience through continuous and detailed activities that offer to patients.

  • PDF

A Study on the Economic Estimation of the Recycling of Construction Waste (건설폐기물(建設廢棄物) 재활용(再活用) 과정에 대한 경제성(經濟性) 평가(評價) 연구(硏究))

  • Park, Won-Woo;Lee, Sang-Duck;Min, Bo-Ra;Park, Lee-Ran;Gim, Ui-Gyeong;Baek, Mi-Hwa;Kim, Dong-Su
    • Resources Recycling
    • /
    • v.17 no.2
    • /
    • pp.55-62
    • /
    • 2008
  • Amount of waste is always generated in industrialization process and it is gradually increasing. Domestic and industrial waste in 2003 increased by 9.5 percent than that of the last year(2002), whereas the amount of construction waste increased largely by 21 percent. Recently construction waste of total waste accounts for nearly 50 percent, waste concrete and Ascon from the construction waste takes up to 73 percent. Furthermore, amount of natural materials are gradually decreasing, that is, they are not sufficient any more. Owing to these reasons, the importance of recycling construction waste has been emphasized. The use of recycling aggregate makes the disposal of construction waste easier as well as protects environment from gathering raw aggregate. Also, it has the alternative effect economizing the insufficient new natural aggregate. This study employs the cost-benefit model to analyze the economic effect of construction waste recycling of Ascon which takes relatively high part of the total waste. The cost-comparison between raw aggregate and recycling aggregate were analyzed. With the model, the economic effect of Ascon recycling in 2003 and 2004 in capital area of Korea were analysed. Cost comparison between raw aggregate and recycling aggregate were also carried out. The result showed that the economic effect of Ascon recycling increased to 0.0808 for 2004 as compared 0.0694 for 2003. We could not conclude using above data, but this result shows that the economic benefit of Ascon recycling of construction waste has increased.

A Simple, Sensitive, and Specific HPLC Analysis of Tissue Polyamines using FNBT Derivatization: Its Application on the Study of Polyamine Metabolism in Regenerating Rat Liver (생체의 Polyamine-분석을 위하여 FNBT-유도체를 이용하는 간편하고 특이적이며 예민한 Isocratic RP-HPLC 분석법과 재생성 흰쥐-간의 Polyamine-대사의 변동에 관한연구)

  • Choi, Sang-Hyun;Kim, Hyung-Gun;Park, Hong-Ik;Chun, Boe-Gwun
    • The Korean Journal of Pharmacology
    • /
    • v.24 no.2
    • /
    • pp.233-240
    • /
    • 1988
  • A simple and selective isocratic HPLC method for the analysis of tissue polyamine contents is described and applied on the study of the changes of the hepatic polyamine contents after partial hepatectomy in male rats. The hepatic polyamines are extracted with 0.4 M perchloric acid containing 2 mM disodium EDTA, and then the extract is redissolved in 100 ul of 1 M sodium carbonate and incubated with 300 ul of FNBT-dimethylsulfoxide (1: 100) mixture. The N-2'-nitro-4'-trifluoromethylphenyl drivatives of polyamines are separated through a ERC-ODS column in an isocratic mode with an acetonitrile-water (80:20) mobile phase within 20 min. per a sample, while monitoring the effluent at 242 nm. This improved method which could detect subnanogram of each polyamines is highly specific and reproducible as evidenced by the application of it on the study of the changes of polyamine contents in the regenerating rat liver after partial hepatectomy.

  • PDF

Differential Media Effects on Candidates' Image and Correlations Among Media Use, Interpersonal Communication, and Voting Participation (후보자 이미지 형성에 관한 미디어의 차별적 효과와 미디어 이용, 대인커뮤니케이션, 투표참여 간의 상호관계에 관한 연구)

  • Kim, Jin-Young
    • Korean journal of communication and information
    • /
    • v.32
    • /
    • pp.113-146
    • /
    • 2006
  • This study explored how media and interpersonal communication affected voters in Busan mayoral by-election, focusing on the mutual relations among media use and attentive use of political campaign, interpersonal communication, and voting participation. Also, comparative analysis between image factor and the factor of political party influencing the decision of a candidate were examined. Additionally, it was analysed differential media effects on candidates' image. According to the results, the local media use and attentive use of political campaign had the influence on the increase of interpersonal communication about the election. Voters who had much interpersonal discussion with others participated more than voters who had less interpersonal discussion. Media use did not directly affect the participation of voting, but indirectly contributed to participation of voting through interpersonal discussion. The assumption of differential media effects on candidates image was partly proved. There were statistically significant differences in the factor of competence of candidates' image among three experimental groups (attentive use of TV discussion program, Internet web sites of two candidates, and printing materials of political advertisement). Furthermore, with three main vote variables, issues, candidates image, party identification, the results of comparative analysis between image factor and the factor of political party influencing the choice of a candidate suggested that a sense of oneness with a party was highly related to the choice of the candidates of the party, however, candidates' image was not related to the decision of a candidate. Political party had more impact on for whom to vote than candidates' image in this study.

  • PDF