• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.364-367
• /
• 2007

We combined CC2431(Chipcon, Norway), as the platform for the Indoor Location Tracking, which follows Zigbee/IEEE802.15.4 standards in RSSI (Received Signal Strength Indicator) and Base Station Node and then, embodied Indoor Location Tracking System. CC2431 is composed of the Reference Node that transfer its current position at the designated place and the Blind Node. The Blind node receives the current position(X and Y coordinates) of the Reference Node fields which are being contiguous and also, calculates its current position and transfers it to the Base Station Node. The base station node is used for receiving the current position of blind node and passing its data to the PC as a gateway. We can make sure where is the Blind Node not only from the out-of-the-way place of the server side but from the outside in a real-time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.799-804
• /
• 2011

The LFLP (Linear Fresnel Light Pipe) system uses a linear Fresnel lens to follow the sun and concentrates the parallel sunlight into a line. A LFLP daylighting system has been developed and updated to a DBLP (Double Blind Light Pipe) daylighting system to improve the overall system efficiency in the morning and afternoon. The new design consists of a double-blind style with a cone-shaped light transformer. The blinds are used to collect the sun's altitude and azimuth movements through the day. Behind the two sets of blinds is the light transformer, which is based on a parabolic-shaped light concentrator. The light transformer is designed to efficiently deliver light within a thirty-degree radial spread so that the light pipe can internally reflect the light. The results of scale-model tests are encouraging, and the efficiency is three times higher than that of the previous LFLP system.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.196-205
• /
• 2018

This paper presents an algorithm for passive localization of a ship by applying the ray back-propagation technique to the ship radiation noise data. The previous method [S. H. Abadi, D. Rouseff and D. R. Dowling, J. Acoust. Soc. Am. 131, 2599-2610 (2012)] estimates the position of a sound source in the near-field environment with no array tilt by using the RBD (Ray-based Blind Deconvolution) and ray back-propagation techniques. However, when there exists an array tilt, the above method leads to a large position estimation error. In order to overcome the problem, this study proposes an algorithm that estimates the position of a sound source by correcting the array tilt using the RBD and ray back-propagation techniques. The proposed algorithm was verified by using the ship noise of SAVEX15 (Shallow-water Acoustic Variability EXperiment in 2015) experimental data.

• Journal of the Korea Convergence Society
• /
• v.11 no.3
• /
• pp.45-52
• /
• 2020

In this study, we propose a new Relative position pattern unlocking solution based on blind interaction, which is a new unlocking method, and compared it with existing unlocking methods to verify usability and security improvement. And verified the practical value of the proposed new unlocking solution. The relative position pattern unlock method is easily remembered than the numeric code method and is worth practical enough to show a degree of learning ease similar to the drawing pattern method. The new method is safer to steal than other two methods. It can be manufactured at a low cost and can also be used by special users such as blind people. Therefore, the practical value is relatively high.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.280-283
• /
• 2016

본 논문에서는 DIBR 3 차원 영상을 위한 블라인드 워터마크 방법을 제안한다. DIBR 을 이용한 3 차원 영상은 낮은 Bitrate 와 시점조정 가능성으로 인해 주목받고 있지만, DIBR 과정 중 워터마크 손상이 발생해 워터마크에 어려움이 있다. 이를 극복하기 위해 DIBR 의 특성을 이용한 깊이영상 기반으로 워터마크 삽입 영역을 탐색하는 방법을 사용하며, 이를 통해 시점이동에 민감하지 않은 영역에 워터마크를 삽입하는 것이 효과적임을 실험적으로 증명하였다. 또한 시점이동 후 사라질 가능성이 큰 불필요한 워터마크 삽입을 최소화하여 워터마크 삽입 후 영상의 화질저하를 줄였다. 이에 본 논문에서는 깊이영상을 이용해 변화가 적은 영역을 탐색하기 위한 연구를 진행하였다. 이는 후에 가상 시점 영상에 추가적인 공격이 가해지더라도 더 강인성을 가질 수 있는 기초가 되었다. 또한 블라인드 워터마크 방법을 적용하기 위해 기존 워터마크 데이터와 유사도를 측정하는 방식으로 워터마크 삽입 위치를 파악하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.51-57
• /
• 2009

Blind equalization techniques have been widely used in wireless communication systems. In this paper, we investigate the information potentials in the criterion of minimizing Euclidian distance between two PDFs criterion for adaptive blind equalizers and evaluate BER performance of the method that has utilized an appropriate balance between the two information potentials, one from output samples and ramdomly generated desired samples at the receiver and another from the interactions among output samples. The balanced information potential method has shown in the BER performance results that it can produce significantly enhanced BER performance in blind equalization applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.449-452
• /
• 2007

An intelligent robot with RSSI based indoor location estimation function was designed and implemented. A wireless sensor node was attached to the robot to received the location data from the indoor location estimation function. Spartan III was used as the main control device in the mobile robot. The current location data collected from the indoor location estimation system was transferred to the mobile robot and server through Zigbee/IEEE 802.15.4 wireless communication of the sensor node. Once the location data is received, the sensor node senses the direction of the robot head and directs the robot to move to its destination. Indoor location estimation intelligent robot is able to move efficiently and actively to the user appointed location by implementing the proposed obstacles avoidance algorithm. This system is able to monitor real-time environmental data and location of the robot using PC program. Indoor location estimation intelligent robot also can be controlled by executing the instructions sent from the PC program.

• The KIPS Transactions:PartB
• /
• v.10B no.5
• /
• pp.479-484
• /
• 2003

We propose a blind watermarking method that embeds a binary pseudo-random sequence (watermarks), (-1, 1), into wavelet dc components, while most watermarking techniques embed watermarks in the middle frequency range for robustness and fidelity. In our scheme, the watermarks are embedded into particular locations to be selected by a key, where some watermark embeddings are skipped to avoid severe degradation in quality. Our robustness is compared to some results registered to the ChechMark [1] that is one of the most popular benchmarking tools.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.1001-1009
• /
• 2009

In this paper, an efficient blind frequency offset estimation method for radio resource saving in orthogonal frequency division multiplexing (OFDM) systems is proposed. In the proposed method, we obtain two time different received OFDM signal blocks by using the cyclic prefix and define the cost function by using the two OFDM signal blocks. We show that the cost function can be approximately expressed as a closed form cosine function. The approximated cosine function can be obtained from three independent cost function values calculated at three different frequency offsets. In the proposed method, the frequency offset can be estimated by calculating a frequency offset minimizing the approximated cosine function without searching all the frequency offset range. Unlike the conventional methods such as MUSIC method, the accuracy of the proposed method is independent of the searching resolution since the closed form solution exists. The computer simulation shows that the performance of the proposed method is superior to those of the MUSIC and the oversampling method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.65-72
• /
• 2004

In this paper, we propose a new blind image watermarking method in wavelet domain. It is necessary to find out watermark insertion location in blind watermark. To select the watermark embedding locations, we use the increment and decrement information of the successive approximation coefficients after discrete wavelet transformed. In order to evaluate the proposed algorithm we embed watermark into test images and detect the watermark after attacks like JPEG lossy compression and performing of various liters. Experimental results show that the proposed method is robust against various kinds of attacks and still remains transparency.