• 레미콘
• /
• 1호통권70호
• /
• pp.4-18
• /
• 2002

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.275-282
• /
• 2002

고유동 콘크리트를 제조할 경우는 유동성 향상을 위한 다량의 고성능 감수제와 재료분리를 방지하기 위한 다량의 분체 혹은 증점제로 말미암아 제조비용이 고가이고, 또한 품질관리에도 많은 어려움이 있다. 그러므로, 본 연구에서는 유동성 및 재료분리 저항성이 우수한 고유동 콘크리트를 경제적으로 제조하기 위하여 분리저감형 유동화제의 최적배합비를 결정한 다음, 유동화 공법으로 접근하는 것을 검토하였다. 실험결과로 유동화제 첨가량이 증가할수록 유동성 및 블리딩량은 증가하였고, 공기량 및 재료분리저항성은 저하하는 것으로 나타났다. 따라서, 여기에 증점제를 첨가함에 따라 양호한 유동성에서 블리딩량이 저하하였고, 재료분리저항성도 증대되었는데, 마지막으로 AE제량 증가에 따라 저하된 공기량이 회복되므로써 양질의 분리저감형 유동화제로 최적배합비를 결정할 수 있었다. 경화 콘크리트 특성으로 유동화 공법으로 제조된 고유동 콘크리트의 압축강도는 베이스 콘크리트보다 증가하는 것으로 나타났고, 무다짐 공시체의 압축강도는 표준다짐 공시체의 압축강도와 유사한 것으로 나타나 다짐 방법간의 차이는 없는 것으로 나타났다.

• 건설안전기술
• /
• 통권33호
• /
• pp.58-61
• /
• 2005

• 콘크리트학회지
• /
• 제13권3호
• /
• pp.69-76
• /
• 2001

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.327-328
• /
• 2010

본 연구에서는 분리저감형 유동화제의 최적배합비를 결정하고, 이것을 사용한 콘크리트의 특성을 분석하였다. 그 결과, 유기산계와 유기합성복합체를 함유한 유동화제를 사용한 콘크리트는 KASS 5T-401의 품질기준을 만족하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.297-300
• /
• 1998

Usually the flowing concrete manufactured upon normal-mixed base concrete would segregate due to the less of fine particle content. In the previous studies, a new type admixture(liquid segregation reducing type superplasticizer) has been developed to prevent such segregation without modification of base concrete mixture. In this study, the tests are performed in laboratory to evaluate the admixture by analyzing the properties of flowing concrete with different water to cement ratios, so that it could be used in the fields. According to the results, this kind of superplasticizer could improve the fluidity of concrete without causing segregation. However, it seems to be more desirable of the superplasticizer could be adjusted, before it is put into the practical use, not to cause some other problems such as rapid rate of slump and air loss and retarding of setting time.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.661-664
• /
• 2000

It is known that high flowing concrete performs much higher fluidity, segregation resistibility and better placeability than normal concrete. However, it is hard to apply high fluidity concrete in field because of high manufacturing cost. Therefore, we intend to investigate the validity of segregation reducing type superplasticizer which is made by combining 0.61 of viscosity agent and 0.022 of AE agent for 1 of superplasticizer. Test are conducted on high flowing concrete using fly ash by applying segregation reducing type superplasticizer. According to experimental results, As contents of fly ash increase, fluidity, segregation resistibility and placeability shows favorable results. And also compressive strength at early age shows to be retarded, while it gains high strength at later age.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.99-102
• /
• 2002

This paper discusses the estimation of construction cost of high fluidity concrete using segregation reducing type superplasicizer with 350kgf/cm2 of design strength and 60$\pm$5cm of slump flow in order to verify the cost down effect of high fluidity concrete compared with that of plain concrete with 350kgf/cm2 of design strength and 18cm of slump and with 210kgf/cm2 of design strength and 15cm of slump. According to research, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

• 한국건축시공학회지
• /
• 제4권2호
• /
• pp.129-136
• /
• 2004

High fluidity concrete(HFC) requires high dosage of superplasticizer to acquire sufficient fluidity, and high contents of fine powder and viscosity enhancing admixtures to resist segregation. The use of high amount of admixtures to make HFC at batcher plant in ready mixed concrete company is one of the reasons to raise the manufacturing cost of HFC. For this reason, new type of manufacturing method of HFC are described using both flowing concrete method and segregation reducing superplasticizer(SRS) in order to gain economical profit and offer the convenience for quality control.. As dosage of melamine based superplasticizer increases, it shows that fluidity and bleeding increase, while air contents and ratio of segregation resistance decrease. It also shows that addition of viscosity agent into superplasticizer reduce bleeding and improve segregation resistance of concrete. Dosage of AE agent into superplasticizer containing viscosity agent recovers loss of air contents during flowing procedure. Combination of proper contents of superplasticizer, viscosity agent and AE agent make possible to develope segregation reducing type superplasticizer. Compressive strength of high fluidity concrete applying flowing method with it is higher than that of base concrete. No differences of compressive strength between compacting methods are found. For the estimation of construction cost of high fluidity concreting using segregation reducing type superplasicizer, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer cost, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.