• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.369-370
• /
• 2008

This paper describes the electric field distribution of high voltage polymer bushing with inner field shaper designs. The field control can be achieved by means of the designs of such internal field shaper. But high electric stress occurred between field shaper and central conductor by the closely space. In accordance, the floating and ring shield designs was importance for electric stress grading at critical parts of the bushing. The bushing has a central conductor, and internal ring shield or floating shield, gaps are formed between field shaper and ring shield. Accordance equipotential lines extend through gaps. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1141-1142
• /
• 2015

실리콘 고무는 옥외용 폴리머 애자 또는 부싱 등에 주로 사용되고 있으며, 이에 대한 연구가 많이 진행되어 지고 있다. 최근에는 나노 기술이 발달함에 따라 전기 재료에 나노 사이즈의 필러를 첨가하여 재료의 특정 특성들을 향상시키는 연구들이 진행되어 지고 있다. 본 논문에서는 전기적인 성능을 향상시키고자 나노 사이즈의 $Al_2O_3$를 첨가한 상온 경화형 실리콘 고무에 대한 연구를 진행하였으며, DC 전계와 오염 상황 하에서 연면 파괴 강도를 측정하였으며, 접촉각과 표면 저향률을 측정하였다. 실험 결과, 필러 함량이 증가할수록 연면 절연 파괴 강도와 표면 저항률은 증가하였으며 접촉각은 감소하였다. 또한, 일정 함량 이상에서는 연면 절연 파괴 강도와 표면 저항율이 감소하는 것으로 나타났다.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1181-1186
• /
• 2008

Insulators which are used in the domestic electrical industries are mostly depended on importation from some advance countries. Even though insulators which are made of ceramic material have been mostly used domestically, the ratio of usage on composite insulators is recently being increased because of difficulties in manufacturing and high cost regarding ceramic stuffs. In this research, we are trying to develop the composite insulators which are very efficient in insulation regardless of the matter of weight. Even though the technique of manufacturing composite insulator are quite generalized worldwide at the moment, one of the most important issue is to keep security on the know-how that an ingredient of insulated material named 'SF6 gas' is included. Therefore, The aim of this paper is to improve the bonding force and air tight property between two components of composite insulator, Flange and FRP Tube.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.648-652
• /
• 1994

Lower Arm은 전차축식 현가장치에 사용되는 자동차부품으로 바퀴에서 발생되는 제동력이나 코너링력 등을 지탱하는 장치이다. V형의 상하 2개의 서스펜션암의 축에 의해 츠레임에 장착되고 좌우에 있는 Lower Arm끝부분은 볼조인트 및 부싱에 의해 스티어링 너클에 부착된다. 압입부품들은 자동차의 주행중 발생하는 외력에 의하여 이탈될 수 있는 위험성에 항상 노출되어 있어 자동차에 사용하는 압입부품들의 이탈력은 매우 중요하지만 한번 이탈시킨 Lower Arm은 이탈력이 현저히 저하되기 때문에 이탈력 측정에 의한 품질관리는 전량검사가 불가능하게 된다. 본 연구는 Lower Arm에 압입되는 볼조인트의 압입력을 압입거리에 따라 측정하여 Lower Arm에 뚫어진 볼조인트 압입구멍의 크기와 압입력의 상관관계를 실험적으로 구할수 있는 크기와 압입력의 상관관계를 실험적으로 구할 수 있는 모니터링 시스템을 개발하고자 한다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.2
• /
• pp.199-204
• /
• 2017

In this study, analytical methods for designing a torque arm pin and elastomeric bushings of a conventional-type three-point-suspension gearbox of a wind turbine are investigated. The design loads for the torque arm were derived by considering the effects of the transmitted torque and self-weight of the gearbox. Based on the design loads, design methods for the torque arm pin and elastomeric bushings were introduced in the terms of material and size selection. Finally, a small-scale conventional-type gearbox was designed by applying the derived design methods. This study is an elementary and analytical study for the design of the torque arm pin and elastomeric bushings. It is necessary to verify and supplement the results further through extensive experimentation.

• Tribology and Lubricants
• /
• v.23 no.5
• /
• pp.195-200
• /
• 2007

This paper presents the friction induced scuffing and wear defects analysis of a pin bushing bearing based on the chemical composition using a scanning microscopy (SEM) and an energy dispersive X-ray analyzer (EDX). The SEM/EDX system, which may provide good information on the surface thermal defects and chemical compositions, provides impurities such as an aluminum, a silicon, a ferrous component and an oxygen, especially. The EDX measured results show that the oxygen may reduce the strength and a hardness of a pin busing, which may lead to a scuffing and a seizure on the rubbing contact surface. The current technology fabricated by a sintering for a pin bushing bearing should be modified or changed to reduce the oxygen composition and the impurities in pin bushing materials.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.464-466
• /
• 2014

The mechanism synthesis methods, graphical, analytical and computer-aided technique have been proposed for selecting and scaling mechanical system. According to developing computation tools, mechanism could be synthesized much faster and more correct than previous analytical ways by improved techniques. In this paper, the improved synthesis method is proposed to solve body guidance synthesis problem. To perform the mechanism synthesis for body guidance, a planar linkage is modeled as a set of free three bushings located in design space. The values of bushing stiffness and x, y position of bushings yielding a desired functional requirement related to input motion are found by using an optimization technique.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.145-149
• /
• 2005

Recently, polymer insulator and bushing that are used for high voltage application have some advantages such as light weight, small size, vandalism resistance, hydrophobicity and easy making process. The pole mount transformer installed in distribution system is acting direct role in supply of electric power and the electric power device should drive safely for long tenn. In this paper, the polymer bushing of pole transformer is designed adaptively to current assembly method, designed bushing is manufactured on basis of that result. The electric field of designed transformer is investigated by FEM program.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.489-490
• /
• 2008

This paper describes the analysis of electric field distribution of high voltage polymeric bushing with structure. The high voltage bushing consists of FRP tube and housing made of LSR. The field control can be achieved by means of the design of such internal field shaper and top corona ring as grading electrodes. In accordance, the optimized design uses both internal and external elements for electric stress grading at critical parts of the bushing. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymeric bushing.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1951-1953
• /
• 2000

Partial Discharge is non-disruptive discharge, which can be discriminated to 3 kinds as firstly, internal discharge which is caused by internal voids inside of insulator, secondly, surface discharge which occurs from the surface of insulator and finally, corona discharge which is from the surface of an electrode. In this thesis, three kinds of defects are artificially made to the inside and the surface of the epoxy resine busing with internal voltage detection sensor, which is practically equipped into SF6 gas insulated switchgear for 22.9kV distribution line, so that discrimination of three kinds of PD signals by means of phi-q-n pattern analysis method was performed.