• Journal of the Korea Institute of Building Construction
• /
• v.7 no.1 s.23
• /
• pp.57-62
• /
• 2007

Generally, the strength of concrete depends on factors of materials, mix proportions, compaction, manufacturing methods and curing and so on. And recently, it has increased the using of crushed sand for concrete due to the exhaustion of good natural aggregate. In case of Korea, in 2004, the using ratio of crushed sand occupies about 28% of whole fine aggregate. This is an experimental study to compare and analyze the influence of W/B ratio and replacement ratio of crushed sand on the fluidity and compressive strength of high strength concrete. For this purpose, the mix proportions of concrete according to the W/B (31.5, 27.5, 23.5%) and replacement ratio of crushed sand (0, 20, 40%) was selected. And then air content, slump-flow, a-lot, compressive strength test were performed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.73-76
• /
• 2005

Recently, Trouble of sand supply is occurred according to exhaustion of natural sand resources. therefore, various measures are proposed for solution of trouble of sand supply and crushed sand among measures is used as one of most universal measures. but crushed sand which have poor particle shape and plenty of makes micro particle the qualify of concrete deteriorated. Therefore, this study evaluated physical properties of mortar using crushed sand and applied evaluation result to fundamental data The result of this study have shown that quality of mortar using crushed sand independently is poor against general mortar. but, mortar flow and compressive strength is increased in case of using crushed sand according to mixing ratio properly.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.89-92
• /
• 2005

This study investigates influence of particle properties of crushed sand on the duality of concrete. The test shows that an increase of fineness modulus(FM) resulted in high slump and air contents, while compressive strength decreased due to decreased adhesion with reduction of surface area. As grain shape become rounder, the slump of concrete increased, due to reduction of internal friction, and increased air contents. The reduction of adhesion by abrasion of surface declined compressive strength during the process of manufacturing crushed sand. Increase of powder contents decreased slump and it also decreased air contents due to the effect of filling air void. In addition. using powder contents increased compressive strength, but could not find any difference of bleeding and tensile strength with particle properties.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.285-292
• /
• 2001

The amount used of aggregates for concrete is increasing rapidly since the mid-1980s in Korea. The natural gravels from river are already displaced with crushed stone, and use of crushed sand as a substitute of natural river sands, also, is getting increased day by day. This paper is presented for mixture of high strength concrete using crushed sands. Mixing design of concretes are various water-cement ratios(w/c) such as 25%, 40%, 55% and different replacement ratio of crushed sands to natural sands such as 0%, 20%, 40%, 60%. As a results, it has been shown that compressive strength of concretes with w/c lower than 40% and 25% is higher than $400kgf/cm^2$ and $600kgf/cm^2$ respectively.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.4
• /
• pp.87-93
• /
• 2008

With an increased use of alternative aggregate due to exhaustion of quality aggregate resources, the amount of used crushed aggregates have been increased and as a result, development of admixture materials has also been improved and its amount of use is increasing from day to day in order to secure quality in concrete. Accordingly, the purpose of this study is to make concrete of good quality by using chemical admixture developed in this study by replacement rate of fine aggregate. At first, susceptibility, compressive strength ratio and length change ratio in both fresh and hardened concrete were evaluated according to corresponding regulation. As for high performance related regulation, APC NO.3 and PC series were going to rule, and as for AE agent regulation, replacement ratio of fine aggregate of high performance chemical admixture was 10:0 and other chemical admixture met quality regulation for AE agent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.89-92
• /
• 2006

To investigate the properties of high flowing and high strength concrete with crushed sand and fly ash for CFT structure, many batches were performed by a trial-error method. In the experiment W/B was set up three levels as 0.25, 0.30 and 0.35. Also the variables of the experiment were a substitution ratio of fly ash, a blend ratio of crushed sand and the ages of specimens(3, 7, 28 days). The results of this study are summarized as the follows; 1) The effect a substitution ratio of fly ash on the compressive strength was not consistent with age. For twenty-eight day compressive strength, the best result was come out when cement was substituted by 10% of fly ash. 2) The decrease of the water binder ratio, the increase of compressive strength and elastic modulus. Also the relationship is very similar to the case of a normal concrete

• 레미콘
• /
• no.10 s.53
• /
• pp.49-71
• /
• 1997

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.17-20
• /
• 2005

This study investigates mock-up test of the concrete containing crushed sands with improved quality and following could be draws as conclusions. The slump satisfies the target value. The air content reaches the goal, however, it decreases by the occurrence of loss with elagse of age. In normal strength region, the setting time of CS24 member is shorter than that of SS24 member. In high strength region, the setting time of SS50 member is make only slower than that of CS5O because of the use of retarding AE agent. The compressive strength of the concrete using crushed sands is little higher than the concrete using washed sea sands, and the compressive strength of core sample increases at lower part. Drying shrinkage of the concrete using crushed sands is larger than that using washed sea sands. At water caring condition, both the concrete using crushed sands and using washed sands expand at first, exhibit to be swelled and with elagse of age, they remain relatirely constant. Also, the drying shrinkage occurred greatly when the width and thickness of a member are small because it is easy to evaporate the inner part vapor in the small width and thickness of a member. there can be little different according to the location of a contact gauge, however it is similar to the change of specimen's length change. The concrete using crushed sands, of which grading, grain shape and fine particle is improved, are comparable to the quality of the concrete using washed sea sand.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.65-68
• /
• 2011

이 논문에서는 모래의 주성분을 분석하여 콘크리트 배합설계용의 적합성을 판별하는 시험방법을 제안한다. 주성분을 분석하는 방법은 자연모래와 부순 모래, 그리고 혼합모래에 포함된 유해물(점토, 마사토, 염화물)의 패턴을 분석하여 정지영상에서 유해물 비율을 나타내고자 한다. 영상으로 판독된 유해물 비율은 도로공사 품질시험기준에 의해 시험된 데이터와 비교하여 근접한 값을 도출해 내어 건설 자재인 모래에 섞여있는 유해물질을 검출해 내는 알고리즘을 제시한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.71-74
• /
• 2004

Recently, with the wide shortage of natural sand resources, it has been increasingly used the crushed sand. rushed sand is made by the process of crushing the rocks artificially, which has different particle properties compared with that of natural sand. Because such different panicle properties of crushed sand results in an undesirable effects of concrete. improvement technology for crushed sand particle properties like grain shape and fine particle needed during the manufacturing process. In this paper, improvement technology of grain shape and fine particle is reported. According to test results, adequate investment for manufacturing facilities like impact crusher and abrasion test machine is required to meet the advanced grain shape and grading of crushed sand. Based on the investigation of test result, mixing of natural land and crushed sand with given proportion can achieve the improvement of grain shape. For improving excessive fine panicle contents. current manufacturing system also can enhance the existing technology for fine particle without additional investment. It can be concluded that adequate investment and research can improve the quality of crushed sand.