• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.122-130
• /
• 2006

Congenital Missing Teeth(hypodontia, oligodontia) is the developmental absence of one or more teeth. It has been reported as being the most common anomaly of dental development in human, relatively common in the permanent dentition. In a recent review, Vastardis has quoted incidence ranges of $1.6%{\sim}9.6%$ in the permanent dentition. Brook has quoted a prevalence of $3.5%{\sim}6.5%$ in most populations, with severe hypodontia, defined as the absence of six or more teeth, having a prevalence of $0.3{\sim}0.4%$. The most commonly affected teeth are third molars, followed by maxillary lateral incisor, and second premolars. The etiology is unknown, several hypotheses include trauma, nutritional deficiency, infection, metabolic abnormalities, systemic disease and genetic influence. The multiple congenital missing is commonly associated with specific syndrome or severe systemic abnormalities such as cleft lip & palate and Down's syndrome. These cases present that children have multiple congenital missing teeth in the permanent dentition, without any systemic disease. Management of this condition must be considered orthodontic and prosthodontic treatment comprehensively. In these cases, children were treated by space maintainer or orthodontic appliance and follow-up checked.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.366-376
• /
• 2013

The purpose of this study is to evaluate the marginal and internal fit of coping made by CAD/CAM using different scanning methods. Zirconia coping was made by each CAD/CAM system followed by intra-oral scanning, model optical scanning and model contact scanning. It was embedded into Epoxy Resin and was cut by buccal to lingual. AMD (Absolute marginal discrepancy), MG (Marginal gap), GA (Gap of axial), GL (Gap of line angle) and GO (Gap of occlusal) of each sample were measured. The result is as followed; 1. The mean value of AMD in Group 1, Group 2, Group 3 are $141.21{\pm}42.94{\mu}m$, $140.63{\pm}31.64{\mu}m$, $109.37{\pm}28.42{\mu}m$. The averages of MG in Group 1, Group 2, Group 3 are $82.52{\pm}43.99{\mu}m$, $90.28{\pm}27.93{\mu}m$, $66.55{\pm}28.77{\mu}m$. Statistically there is no difference in AMD and MG among the three Groups (Anova, P>0.05). 2. GA of Group 2 revealed statistically difference compared with Group 1 and Group 3 (Anova, P<0.05). 3. GL and GO of Group 1 showed statistically significant differences compared with Group 2 and Group 3 (Mann-whitney test (P<0.05). Zirconia copings made by 3 ways of scanning methods have no difference with conventional ceramics in AMD and MG which are known as the most important factors.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.280-287
• /
• 2010

Objective: In spite of increasing dental treatment for the disabled, there was a few collected data on dental treatment status and dentists' perception in Korea. The purpose of this' study is to research the current dental treatment status for the disabled in Korea and to suggest public health policies for the disabled. Material and methods: Total of 68 dentists who have treated the disabled regularly were asked to fill questionnaires regarding dental treatments for the disabled. Results: 1. It is necessary to set up public dental center for the disabled in rural area. 2. In case of dental treatments relating to cerebral palsy, ADHD, autism, the compensation for treatment time and extra investment is needed. 3. Only 39.7% of dentists charged treatment fees to the disabled as same as normal patients. Moreover 38.2% of dentists answered that they didn't charge treatment fees at all when their patient are disabled. 4.23.5% of dentists provided all of dental treatments including dental implant and orthodontic appliances in Korea. However, 54.3% of dentists reported the improvement of access to dental implant, orthodontic and esthetic treatment is needed. 5. It is imperative for the government to improve the support system for the disabled. Conclusions: Through this research only 26.5% of dentists answered that they had received the fund from the government and 11.1% of them were satisfied with the support for the disabled in Korea. This indicated the improvement of government financial support system for the disabled is needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.70-75
• /
• 2000

The cemento-ossifying fibroma is a well-demarcated and occasionally encapsulated neoplasm composed of fibrous tissue that contains varying amounts of calcified tissue resembling bone, cementum, or both. The greatest number of cases are encountered during the third and fourth decades of life and there is a definite female predilection, with female-to-male ratios as high as 5 : 1 being reported. The mandible is involved far more than the maxilla, and 90 percent of all cases are located in the mandible. The mandibular premolar-molar area is the most common site. Radiographically, the lesion is most often well defined and unilocular. Depending on the amount of calcified produced in the tumor, it may appear as completely radiolucent ; more often it shows varying degrees of radiopacity. Some lesions may be largely radiopaque with a radiolucent halo. On microscopic study, the tumor is composed of fibrous tissue of varying degrees of cellularity containing calcified material. This may be in the form of trabeculae of osteoid and bone or basophilic ovoid calcifications that resemble cementum-like material. Admixture of the two types of calcifications are commonly seen. On this case, large cemento-ossifying fibroma has grown in the mandible and this lesion was treated by complete surgical excision and posterior iliac bone graft. A review of literature and a report of a case of cemento-ossifying fibroma are presented.

• Journal of dental hygiene science
• /
• v.2 no.2
• /
• pp.105-113
• /
• 2002

This study was aimed to investigate the practice on the infection control and dental waste disposal in dental clinic. The data used in this study had been collected in 100 dental clinics located in Seoul city from August to October, 2001. It was shown that examination instruments, oral surgery instruments, and periodontal instruments were almost sterilization in dental clinic. It was high in the recognition of individual protection but it was low in the degree of practice. Therefore, the practice in infection control is very important to dental team for safety of patients and operators.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.26 no.1
• /
• pp.17-23
• /
• 2017

Purpose: This retrospective study is to evaluate whether the timing of implant placement and the result of esthetic outcomes are related. Materials and Methods: Among the patients who had undergone single implant surgery on anterior area from 2010 to 2013 in Veterans Health Service Medical Center, 34 implants in 27 patients (24 male and 3 female) were selected and categorized into 3 groups according to the timing of placement, which are group D (Delay), group E (Early) and group I (Immediate). Aesthetic indices used included the Pink Esthetic Score (PES). It has 7 variables scores, such as mesial papilla, distal papilla, a level of soft-tissue margin, soft-tissue contour, alveolar process, soft-tissue color, and soft-tissue texture. Each variable ranges from 0 to 2, therefore total 14 points are highest. All patients were received by regular follow-up at least 1-year. One examiner measured PES on the intraoral photos. Each patient was considered as a statistical unit for statistical analysis. Statistical analyses were performed using a commercially available statistical software (SPSS Statistics 21.0, IBM Corp., Armonk, NY, USA). Kruskal-Wallis test was used for inter-group comparisons. Statistical significance was set at P<0.05. Result: Mean score in Group D, Group I, and Group E were $11.5{\pm}1.5$, $11.4{\pm}1.8$, and $11.3{\pm}1.8$ respectively. In Kruskal-Wallis test, there are no differences (P=0.989). Conclusion: In this limited study suggests that clinical aesthetic results can be achieved with all treatment protocols. Finally, various factors can be considered to produce the esthetic results.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.1
• /
• pp.19-25
• /
• 2009

STATEMENT OF PROBLEM. Primary stability at the time of implant placement is related to the level of primary bone contact. The level of bone contact with implant is affected by thread design, surgical procedure and bone quality, etc. PURPOSE. The aim of this study was to compare the initial stability of the various taper implants according to the thread designs, half of which were engaged to inferior cortical wall of type IV bone(Group 1) and the rest of which were not engaged to inferior cortical wall(Group 2) by measuring the implant stability quotient(ISQ) and the removal torque value(RTV). MATERIAL AND METHODS. In this study, 6 different implant fixtures with 10 mm length were installed. In order to simulate the sinus inferior wall of type IV bone, one side cortical bone of swine rib was removed. 6 different implants were installed in the same bone block following manufacturer s recommended procedures. Total 10 bone blocks were made for each group. The height of Group 1 bone block was 10 mm for engagement and that of group 2 was 13 mm. The initial stability was measured with ISQ value using Osstell $mentor^{(R)}$ and with removal torque using MGT50 torque gauge. RESULTS. In this study, we found the following results. 1. In Group 1 with fixtures engaged to the inferior cortical wall, there was no significant difference in RTV and ISQ value among the 6 types of implants. 2. In Group 2 with fixtures not engaged to the inferior cortical wall, there was significant difference in RTV and ISQ value among the 6 types of implants(P < .05). 3. There was significant difference in RTV and ISQ value according to whether fixtures were engaged to the inferior cortical wall or not(P < .05). 4. Under-drilling made RTV and ISQ value increase significantly in the NT implants which had lower RTV and ISQ value in Group 2(P < .05). CONCLUSIONS. Without being engaged to the inferior cortical wall fixtures had initial stability affected by implant types. Also in poor quality bone, under-drilling improved initial stability.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.138-145
• /
• 2015

PURPOSE. The objective of this study was to conduct an in vitro comparative evaluation of polished and laser-dimpled titanium (Ti) surfaces to determine whether either surface has an advantage in promoting the attachment of epithelial-like cells and fibroblast to Ti. MATERIALS AND METHODS. Forty-eight coin-shaped samples of commercially pure, grade 4 Ti plates were used in this study. These discs were cleaned to a surface roughness (Ra: roughness centerline average) of 180 nm by polishing and were divided into three groups: SM (n=16) had no dimples and served as the control, SM15 (n=16) had $5-{\mu}m$ dimples at $10-{\mu}m$ intervals, and SM30 (n=16) had $5-{\mu}m$ dimples at $25-{\mu}m$ intervals in a $2{\times}4mm^2$ area at the center of the disc. Human gingival squamous cell carcinoma cells (YD-38) and human lung fibroblasts (MRC-5) were cultured and used in cell proliferation assays, adhesion assays, immunofluorescent staining of adhesion proteins, and morphological analysis by SEM. The data were analyzed statistically to determine the significance of differences. RESULTS. The adhesion strength of epithelial cells was higher on Ti surfaces with $5-{\mu}m$ laser dimples than on polished Ti surfaces, while the adhesion of fibroblasts was not significantly changed by laser treatment of implant surfaces. However, epithelial cells and fibroblasts around the laser dimples appeared larger and showed increased expression of adhesion proteins. CONCLUSION. These findings demonstrate that laser dimpling may contribute to improving the peri-implant soft tissue barrier. This study provided helpful information for developing the transmucosal surface of the abutment.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.172-177
• /
• 2015

PURPOSE. The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS. It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens ($10{\times}10{\times}1.5mm$) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco's modified Eagle's medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey's tests. RESULTS. The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION. The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.496-505
• /
• 2015

PURPOSE. To determine the effect of fibronectin (FN)-conjugated, microgrooved titanium (Ti) on osteoblast differentiation and gene expression in human bone marrow-derived mesenchymal stem cells (MSCs). MATERIALS AND METHODS. Photolithography was used to fabricate the microgrooved Ti, and amine functionalization (silanization) was used to immobilize fibronectin on the titanium surfaces. Osteoblast differentiation and osteoblast marker gene expression were analyzed by means of alkaline phosphatase activity assay, extracellular calcium deposition assay, and quantitative real-time PCR. RESULTS. The conjugation of fibronectin on Ti significantly increased osteoblast differentiation in MSCs compared with non-conjugated Ti substrates. On the extracellular calcium deposition assays of MSCs at 21 days, an approximately two-fold increase in calcium concentration was observed on the etched 60-${\mu}m$-wide/10-${\mu}m$-deep microgrooved surface with fibronectin (E60/10FN) compared with the same surface without fibronectin (E60/10), and a more than four-fold increase in calcium concentration was observed on E60/10FN compared with the non-etched control (NE0) and etched control (E0) surfaces. Through a series of analyses to determine the expression of osteoblast marker genes, a significant increase in all the marker genes except type I collagen ${\alpha}1$ mRNA was seen with E60/10FN more than with any of the other groups, as compared with NE0. CONCLUSION. The FN-conjugated, microgrooved Ti substrate can provide an effective surface to promote osteoblast differentiation and osteoblast marker gene expression in MSCs.