• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권1호
• /
• pp.70-75
• /
• 2000

본과에서는 하악에서 발생한 거대한 백악질-골성 섬유종에서 원발병소부위에 대한 광범위한 외과적 적출술 및 후방 장골이식을 통해 환자의 심미적, 기능적 안정성을 이루었으며 이환치아의 발거와 함께 술후 악간고정을 통하여 얇아진 하악하연부의 병적골절을 방지하였다. 현재까지 병소의 재발은 없고 양호한 결과를 보이고 있으며 향후 보철수복과 함께 지속적인 평가를 요할 것으로 사료된다.

• 치위생과학회지
• /
• 제2권2호
• /
• pp.105-113
• /
• 2002

치과 진료실에서 병원성 미생물의 근원이 되는 곳은 환자의 구강이다. 구강 내에서 행하여지는 모든 진료행위는 타액과 혈액에 노출되고 그 안에 존재하는 병원성 미생물들은 다양한 경로를 통해 전파되어 감염성 질환이 쉽게 발생될 수 있다. 따라서 환자와 치과 종사자들의 감염방지를 위해 주위를 환기시키고 실천적 계기를 마련하기 위해 서울시 치과의원 100곳을 추출하여 진료실 감염관리와 폐기물 처리실태를 조사한 결과 다음과 같은 결론을 얻었다. 1 멸균준비를 위한 기구세척시 대부분 고무장갑을 착용하고 있으나(95%), 기구건조(56%), 기구포장(57%), 멸균지시테이프를 부착(24%)하는 기관은 적었으며, 대부분의 기관이 멸균기(가압증기멸균기 또는 불포화화학증기멸균기 또는 건열멸균기)를 보유하고 있으나(97%), 멸균기의 성능점검이 나 관리는 소홀한 것으로 나타났다. 3. mirror, pincette, explorer 등의 기본기구, 외과기구, 그리고 치주기구는 90% 이상 멸균하였다. 3 표면관리에 있어서 표면소독제로 알콜을 사용하는 경우가 94.0% 이었다. 4. 폐기물 처리의 경우 사용한 주사바늘, 수술용 칼, 봉합용 바늘은 97~98%가 별도의 밀폐용기에 모아서 별도로 처리하고 있으나, 아말감 찌꺼기를 올바르게 보관하는 기관은 65% 수은 찌꺼기를 올바르게 보관하는 기관은 74% 이었다. 5. scaling 시(수술용 고무장갑+구강 마스크+보안경)을 착용하거나(수술용 고무장갑+안면 보호대)를 착용하는 사람은 37% 이었고, 보철물 연마시(구강 마스트+보안경)을 착용하거나 안면 보호대를 착용하는 사람은 25% 이었다. 6. 간염예방주사를 맞았거나 면역되어 있는 사람은 90% 이었다. 7. 마취주사바늘 제거시 손으로 뚜껑을 닫고 제거하는 경우(84%)와 주사바늘에 찔린 경험(62%) 사이에 통계적으로 유의한 차이는 없으나, 많은 사람이 부주의 하고 있는 것으로 나타났다. 8. 환자의 안전관리에 대한 인식과 환자에게 납방어복을 입히는 것과 통계적으로 유의한 차이를 보이지 않으므로 환자의 안전관리를 주의한다고 생각하고 있지만(98%) 실제로 환자를 보호(37%)하는 것은 아니며, 본인의 안전관리에 대한 인식과 술자의 방어방법에서도 통계적으로 유의한 차이가 없으므로 주의한다고 인식(95%)하는 만큼 술자의 보호(88%)를 하지 않는 것으로 나타났다. 이상의 결과 기구의 소독과 멸균의 단계와 절차를 올바르게 적용하는 것과 표면소독제로 알콜 대체재료의 보급이 필요하고, 폐기물 처리 방법에 대한 교육을 더욱 확산시켜야 하며, 개인의 안전관리에 대한 인식에 비해 실천이 부족하므로 특히 환자보호와 더불어 술자 등 개인보호를 위한 실천이 필요하다고 검토되었다.

• 대한심미치과학회지
• /
• 제26권1호
• /
• pp.17-23
• /
• 2017

임플란트 식립시기가 심미적인 부분에 영향을 미치는 것에 대한 연관성을 평가하기 위해 전치부 영역에 식립된 34개의 임플란트 (27명 환자)를 후향적으로 조사했다. 즉시, 조기 및 지연식립으로 시기별로 그룹을 나누고 모든 환자를 보철완료 1년후에 연조직 평가를 시행했다. 통계적으로 그룹별 유의한 의미는 없었다. 식립 시기에 상관없이 만족할 만한 최종결과를 위해 다양한 골이식술과 연조직 이식술이 이루어졌다. 즉, 식립시기로 그 결과를 결정지을 수 없다는 점은 다각적인 면에서 고려사항이 요구된다는 점을 시사한다.

• The Journal of Advanced Prosthodontics
• /
• 제1권1호
• /
• pp.19-25
• /
• 2009

STATEMENT OF PROBLEM. Primary stability at the time of implant placement is related to the level of primary bone contact. The level of bone contact with implant is affected by thread design, surgical procedure and bone quality, etc. PURPOSE. The aim of this study was to compare the initial stability of the various taper implants according to the thread designs, half of which were engaged to inferior cortical wall of type IV bone(Group 1) and the rest of which were not engaged to inferior cortical wall(Group 2) by measuring the implant stability quotient(ISQ) and the removal torque value(RTV). MATERIAL AND METHODS. In this study, 6 different implant fixtures with 10 mm length were installed. In order to simulate the sinus inferior wall of type IV bone, one side cortical bone of swine rib was removed. 6 different implants were installed in the same bone block following manufacturer s recommended procedures. Total 10 bone blocks were made for each group. The height of Group 1 bone block was 10 mm for engagement and that of group 2 was 13 mm. The initial stability was measured with ISQ value using Osstell $mentor^{(R)}$ and with removal torque using MGT50 torque gauge. RESULTS. In this study, we found the following results. 1. In Group 1 with fixtures engaged to the inferior cortical wall, there was no significant difference in RTV and ISQ value among the 6 types of implants. 2. In Group 2 with fixtures not engaged to the inferior cortical wall, there was significant difference in RTV and ISQ value among the 6 types of implants(P < .05). 3. There was significant difference in RTV and ISQ value according to whether fixtures were engaged to the inferior cortical wall or not(P < .05). 4. Under-drilling made RTV and ISQ value increase significantly in the NT implants which had lower RTV and ISQ value in Group 2(P < .05). CONCLUSIONS. Without being engaged to the inferior cortical wall fixtures had initial stability affected by implant types. Also in poor quality bone, under-drilling improved initial stability.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.138-145
• /
• 2015

PURPOSE. The objective of this study was to conduct an in vitro comparative evaluation of polished and laser-dimpled titanium (Ti) surfaces to determine whether either surface has an advantage in promoting the attachment of epithelial-like cells and fibroblast to Ti. MATERIALS AND METHODS. Forty-eight coin-shaped samples of commercially pure, grade 4 Ti plates were used in this study. These discs were cleaned to a surface roughness (Ra: roughness centerline average) of 180 nm by polishing and were divided into three groups: SM (n=16) had no dimples and served as the control, SM15 (n=16) had $5-{\mu}m$ dimples at $10-{\mu}m$ intervals, and SM30 (n=16) had $5-{\mu}m$ dimples at $25-{\mu}m$ intervals in a $2{\times}4mm^2$ area at the center of the disc. Human gingival squamous cell carcinoma cells (YD-38) and human lung fibroblasts (MRC-5) were cultured and used in cell proliferation assays, adhesion assays, immunofluorescent staining of adhesion proteins, and morphological analysis by SEM. The data were analyzed statistically to determine the significance of differences. RESULTS. The adhesion strength of epithelial cells was higher on Ti surfaces with $5-{\mu}m$ laser dimples than on polished Ti surfaces, while the adhesion of fibroblasts was not significantly changed by laser treatment of implant surfaces. However, epithelial cells and fibroblasts around the laser dimples appeared larger and showed increased expression of adhesion proteins. CONCLUSION. These findings demonstrate that laser dimpling may contribute to improving the peri-implant soft tissue barrier. This study provided helpful information for developing the transmucosal surface of the abutment.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.172-177
• /
• 2015

PURPOSE. The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS. It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens ($10{\times}10{\times}1.5mm$) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco's modified Eagle's medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey's tests. RESULTS. The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION. The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.496-505
• /
• 2015

PURPOSE. To determine the effect of fibronectin (FN)-conjugated, microgrooved titanium (Ti) on osteoblast differentiation and gene expression in human bone marrow-derived mesenchymal stem cells (MSCs). MATERIALS AND METHODS. Photolithography was used to fabricate the microgrooved Ti, and amine functionalization (silanization) was used to immobilize fibronectin on the titanium surfaces. Osteoblast differentiation and osteoblast marker gene expression were analyzed by means of alkaline phosphatase activity assay, extracellular calcium deposition assay, and quantitative real-time PCR. RESULTS. The conjugation of fibronectin on Ti significantly increased osteoblast differentiation in MSCs compared with non-conjugated Ti substrates. On the extracellular calcium deposition assays of MSCs at 21 days, an approximately two-fold increase in calcium concentration was observed on the etched 60-${\mu}m$-wide/10-${\mu}m$-deep microgrooved surface with fibronectin (E60/10FN) compared with the same surface without fibronectin (E60/10), and a more than four-fold increase in calcium concentration was observed on E60/10FN compared with the non-etched control (NE0) and etched control (E0) surfaces. Through a series of analyses to determine the expression of osteoblast marker genes, a significant increase in all the marker genes except type I collagen ${\alpha}1$ mRNA was seen with E60/10FN more than with any of the other groups, as compared with NE0. CONCLUSION. The FN-conjugated, microgrooved Ti substrate can provide an effective surface to promote osteoblast differentiation and osteoblast marker gene expression in MSCs.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.468-474
• /
• 2015

PURPOSE. The aim of this study was to characterize and compare bacterial diversity on the removable partial denture (RPD) framework over time. MATERIALS AND METHODS. This descriptive pilot study included five women who were rehabilitated with free-end mandibular RPD. The biofilm on T-bar clasps were collected 1 week ($t_1$) and 4 months ($t_2$) after the RPD was inserted ($t_0$). Bacterial 16S rDNA was extracted and PCR amplified. Amplicons were cloned; clones were submitted to cycle sequencing, and sequences were compared with GenBank (98% similarity). RESULTS. A total of 180 sequences with more than 499 bp were obtained. Two phylogenetic trees with 84 ($t_1$) and 96 ($t_2$) clones represented the bacteria biofilm at the RPD. About 93% of the obtained phylotypes fell into 25 known species for $t_1$ and 17 for $t_2$, which were grouped in 5 phyla: Firmicutes ($t_1=82%$; $t_2=60%$), Actinobacteria ($t_1=5%$; $t_2=10%$), Bacteroidetes ($t_1=2%$; $t_2=6%$), Proteobacteria ($t_1=10%$; $t_2=15%$) and Fusobacteria ($t_1=1%$; $t_2=8%$). The libraries also include 3 novel phylotypes for $t_1$ and 11 for $t_2$. Library $t_2$ differs from $t_1$ (P=.004); $t_1$ is a subset of the $t_2$ (P=.052). Periodontal pathogens, such as F. nucleatum, were more prevalent in $t_2$. CONCLUSION. The biofilm composition of the RPD metal clasps changed along time after RPD wearing. The RPD framework may act as a reservoir for potentially pathogenic bacteria and the RPD wearers may benefit from regular follow-up visits and strategies on prosthesis-related oral health instructions.

• The Journal of Advanced Prosthodontics
• /
• 제8권1호
• /
• pp.1-8
• /
• 2016

PURPOSE. The purpose of this study was to evaluate the efficacy of two different metal conditioners for non-precious metal alloys for the bonding of porcelain to a cobalt-chromium (Co-Cr) alloy. MATERIALS AND METHODS. Disk-shaped specimens ($2.5{\times}10.0mm$) were cast with Co-Cr alloy and used as adherend materials. The bonding surfaces were polished with a 600-grid silicon carbide paper and airborne-particle abraded using $110{\mu}m$ alumina particles. Bonding specimens were fabricated by applying and firing either of the metal conditioners on the airborne-particle abraded surface, followed by firing porcelain into 5 mm in diameter and 3 mm in height. Specimens without metal conditioner were also fabricated. Shear bond strength for each group (n=8) were measured and compared (${\alpha}=.05$). Sectional view of bonding interface was observed by SEM. EDS analysis was performed to determine the chemical elements of metal conditioners and to determine the failure modes after shear test. RESULTS. There were significant differences among three groups, and two metal conditioner-applied groups showed significantly higher values compared to the non-metal conditioner group. The SEM observation of the sectional view at bonding interface revealed loose contact at porcelain-alloy surface for non-metal conditioner group, however, close contact at both alloy-metal conditioner and metal conditioner-porcelain interfaces for both metal conditioner-applied groups. All the specimens showed mixed failures. EDS analysis showed that one metal conditioner was Si-based material, and another was Ti-based material. Si-based metal conditioner showed higher bond strengths compared to the Ti-based metal conditioner, but exhibited more porous failure surface failure. CONCLUSION. Based on the results of this study, it can be stated that the application of metal conditioner is recommended for the bonding of porcelain to cobalt-chromium alloys.

• The Journal of Advanced Prosthodontics
• /
• 제5권1호
• /
• pp.29-35
• /
• 2013

PURPOSE. To longitudinally assess the quality of life in maxillectomy patients rehabilitated with obturator prosthesis. MATERIALS AND METHODS. Thirty-six subjects were enrolled in the span of 16 months, out of which six were dropouts. Subjects (age group 20-60 years) with maxillary defects, irrespective of the cause, planned for definite obturator prosthesis, were recruited. The Hindi version of European Organization for Research and Treatment of Cancer, Head and Neck version 1 of Quality of Life Questionnaire was used before surgical intervention and one month after definitive obturator. Questionnaire includes 35 questions related to the patient's physical health, well being, psychological status, social relation and environmental conditions. The data were processed with statistical package for social science (SPSS). Probability level of P<.05 was considered statistically significant. RESULTS. The quality of life after rehabilitation with obturator prosthesis was 81.48% (${\pm}13.64$) on average. On item-level, maximum mean scores were obtained for items problem with teeth ($1.87{\pm}0.94$), pain in mouth ($1.80{\pm}0.92$), trouble in eating ($1.70{\pm}0.88$), trouble in talking to other people ($1.60{\pm}1.22$), problems in swallowing solid food ($1.57{\pm}1.22$) and bothering appearance ($1.53{\pm}1.04$); while minimum scores were obtained for the items coughing ($1.17{\pm}0.38$), hoarseness of voice ($1.17{\pm}0.53$), painful throat ($1.13{\pm}0.43$), trouble in having social contacts with friends ($1.10{\pm}0.40$) and trouble having physical contacts with family or friends ($1.10{\pm}0.31$). CONCLUSION. Obturator prosthesis is a highly positive and non-invasive approach to improve the quality of life of patients with maxillectomy defects.