• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.414-414
• /
• 2017

토양수분은 지면환경에서 일어나는 수문 및 에너지 순환을 이해하는 데 있어 중요한 기상인자이다. 토양수분 현장관측은 땅속에 매설된 센서에 의해 상당히 정확하게 이루어지만, 관측점 수가 충분치 않아 공간적 연속성을 확보하지 못하는 어려움이 존재한다. 이에 광역적 및 연속적 관측이 가능한 마이크로파 위성센서가 토양수분 정보 획득을 위한 보조수단으로서 그 중요성이 부각되고 있다. 마이크로파 위성센서는 구름 등 기상조건의 제약을 받지 않으며, 1978년 이래 현재까지 여러 위성에 의해 25 km 및 10 km 해상도의 전지구 토양수분자료가 생산되어 왔다. 마이크로파 센서를 이용한 토양수분자료는 동일지점에 대하여 하루 2회 정도 산출되므로 적절한 시간분해능을 가지지만, 공간해상도가 최고 10 km로서 지역규모의 수문분석에 적용하기에는 충분치 않다. 이러한 토양수분자료의 공간해상도 문제 해결을 위하여 다양한 지면환경요소를 활용한 통계적 다운스케일링이 대안으로 제시되었다. 최근의 선행연구들은 대부분 방정식을 이용한 결합모형을 통해 통계적 다운스케일링을 수행하였는데, 회귀식과 같은 선형결합뿐 아니라 신경망이나 기계학습 등의 비선형결합에서도, 불가피하게 발생할 수밖에 없는 잔차(residual)로 인하여 다운스케일링 전후의 공간분포 패턴이 달라져버리는 문제를 안고 있었다. 회귀분석에 잔차의 공간내삽을 결합시킨 회귀크리깅(regression kriging)은 잔차보정을 통해 이러한 문제를 해결함으로써 다운스케일링 전후의 공간분포 일관성을 보장하는 기법이다. 이 연구에서는 회귀크리깅을 이용하여 일자별 AMSR2(Advanced Microwave Scanning Radiometer 2) 토양수분 자료를 10 km에서 1 km 해상도로 다운스케일링하고, 다운스케일링 전후의 자료패턴 일관성을 평가한다. 지면온도(LST), 지면온도상승률(RR), 식생온도건조지수(TVDI)는 일자별로 DB를 구축하였고, 식생지수(NDVI), 수분지수(NDWI), 지면알베도(SA)는 8일 간격으로 DB를 구축하였다. 이러한 8일 간격의 자료를 일자별로 변환하기 위하여 큐빅스플라인(cubic spline)을 이용하여 시계열내삽을 수행하였다. 또한 상이한 공간해상도의 자료는 최근린법을 이용하여 다운스케일링 목표해상도인 1 km에 맞도록 변환하였다. 우선 저해상도 스케일에서 추정치를 산출하기 위해서는 저해상도 픽셀별로 이에 해당하는 복수의 고해상도 픽셀을 평균화하여 대응시켜야 하며, 이를 통해 6개의 설명변수(LST, RR, TVDI, NDVI, NDWI, SA)와 AMSR2 토양수분을 반응변수로 하는 다중회귀식을 도출하였다. 이식을 고해상도 스케일의 설명변수들에 적용하면 고해상도 토양수분 추정치가 산출되는데, 이때 추정치와 원자료의 차이에 해당하는 잔차에 대한 보정이 필요하다. 저해상도 스케일로 존재하는 잔차를 크리깅 공간내삽을 통해 고해상도로 변환한 후 이를 고해상도 추정치에 부가해주는 방식으로 잔차보정이 이루어짐으로써, 다운스케일링 전후의 자료패턴 일관성이 유지되는(r>0.95) 공간상세화된 토양수분 자료를 생산할 수 있다.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.297-309
• /
• 1994

For a total of 210 city and Kun areas in Korea, a model was developed to predict the amount of groundwater use at each area. At first, the total areas were classified into 3 groups by the characteristics of groundwater use: residential(87), industrial(27) and agricultural (96) areas. Among them, type areas, represented by the dominant groundwater usage for typical purposes, were selected: residential(22), industrial(8) and agricultural(32) areas. Data for the various factors possibly related to the groundwater use were statistically analyzed. The factors include, 1) agricultural area, 2) industrial area, 3) adininistrative unit area(city or Kun), 4) population, 5) groundwater capadty for community water supply, 6) average water supply for a person per day, 7) agricultural water-use, 8) industrial water-use, 9) residential wateruse, 10) rates of community water supply. The data were correlated to the total amount of groundwater use, and the correlations tested at the 95% and 99% significance levels. Influential, significantly related, factors were identified from the tests. Using the multiple regression method with the influential factors, predictive equations were drawn to calculate the amount of groundwater use for residential-industrial and agricultural areas, respectively. The equations were calibrated to minimize the RMS(root mean square) of the differences between predicted and observed groundwater use. After the validation with future data, the model can be utilized in the regional development plans to predict the maximum groundwater demand at each area.

• Clinical and Experimental Pediatrics
• /
• v.50 no.5
• /
• pp.443-448
• /
• 2007

Purpose : To evaluate the potential prognostic value of the antithrombin-III (AT-III) level in the children with acute lung injury (ALI), we analyzed several early predictive factors of death including AT-III level at the onset of ALI and compared the relative risk of them for mortality. Methods : Over a 18-month period, a total of 198 children were admitted to our pediatric intensive care unit and 21 mechanically ventilated patients met ALI criteria, as defined by American-European consensus conference, i.e., bilateral pulmonary infiltrates and $PaO_2/FiO_2$ lower than 300 without left atrial hypertension. Demographic variables, hemodynamic and respiratory parameters, underlying diseases, as well as Pediatric Risk of Mortality-III (PRISM-III) scores and Lung Injury Score (LIS) at admission were collected. AT-III levels were measured within 3 hours after admission. These variables were compared between survivors and non-survivors and entered into a multiple logistic regression analysis to evaluate their independent prognostic roles. Results : The overall mortality rate was 38.1% (8/21). Non-survivors showed lower age, lower lung compliance, higher PEEP, higher oxygenation index (OI), lower arterial pH, lower $PaO_2/FiO_2$, higher PRISM-III score and LIS, and lower AT-III level. PRISM-III score, LIS, OI and decreased AT-III level (less than 70%) were independently associated with a risk of death and the odds ratio of decreased AT-III level for mortality is 2.75 (95% confidence interval; 1.28-4.12) Conclusion : These results suggest that the decreased level of AT-III is an important prognostic factor in children with ALI and the replacement of AT-III may be considered as an early therapeutic trial.

• Journal of Chest Surgery
• /
• v.40 no.6 s.275
• /
• pp.420-427
• /
• 2007

Background: Postpneumonectomy empyema (PPE) due to bronchopleural fistula (BPF) can be a surgical challenge for surgeons. We analyzed the follow-up outcomes after performing omentopexy and thoracoplasty for the treatment of PPE with BPF after pneumonectomy. Material and Mehod: Between December 1991 and January 2006, 9 patients underwent BPF closure using an omental pedicled flap for the treatment of PPE with BPF after pneumonectomy. There were 7 males and 2 females (mean age: $45.9{\pm}9$ years). The patients were followed up for a mean of 58 months (median: 28 months, range: $6{\sim}169$). When we performed omentopexy, the surgical procedures for empyema were thoracoplasy for 8 patients and the Clagett procedure for 1 patient. Thoracoplasty was performed for the latter patient due to recurrence of empyema, Result: For the 8 patients who were treated by omentopexy and thoracoplasty, there was 1 operation-related death due to sepsis. During follow up, 1 patient, who was treated by omentopexy and a Clagett procedure, died of acute hepatitis 40 months postoperatively. The early mortality was 11.1% (8/9). Of the 8 patients, including the 1 late death patient, successful closure of the BPF were achieved in all patients (8/9) and the empyema was cured in 7 patients (7/8). Conclusion: The BPF closure using an omental pedicled flap was an effective method for treating PPE with BPF due to 75-destroyed lung, and thoracoplasty with simultaneous omentopexy was effective and safe for removing dead space if the patient was young and in a good general condition.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.5
• /
• pp.540-547
• /
• 2006

Background : Vital stability and right side heart failure are major prognostic factors of acute pulmonary thromboembolism. While it is important to recognize right side heart failure, it is often difficult in real practice. Recently, several studies have described early diagnostic tools for detecting right side heart failure including echocardiography and biochemical markers. This study, we evaluated the prognostic role of the B-type natriuretic peptide (BNP) in an acute pulmonary thromboembolism. Methods : Thirty-four patients with a diagnosis of acute pulmonary thromboembolism were enrolled in the study. The BNP levels were measured and echocardiography was performed at the Emergency Department. Data on the prognostic factors including ventilatory support, vital stability, pulmonary artery pressure, degree of tricuspid valve regurgitation, complications and death was collected from the patients' medical records. The patients with an acute pulmonary thromboembolism were divided into two groups based on the vital stability and the BNP level and the cutoff values and prognostic factors of the two groups were compared. Results : The predictors of the vital stability that influence the prognosis of patients with acute pulmonary thromboembolism were the BNP level, ventilatory support and death. The plasma BNP levels showed a strong correlation with the vital stability, ventilatory support, thrombolytic therapy and death. When the BNP cutoff level was set to 377.5 pg/dl in a ROC curve, the sensitivity and the specificity for differentiating between the groups with stable or unstable vital signs was 100% and 90%, respectively. Conclusion : This study indicates that a measurement of the plasma BNP levels may be a useful prognostic marker in patients with an acute pulmonary thrombo-embolism.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.572-579
• /
• 2001

Recent industrial requirements for highly precise shape processing have brought the electric discharge machining (EDM) in great need. High precision in EDM is primarily achieved by high performance controllers. However there exists inherent precision loss due to structural deformation. On this background, we study structural deformation characteristics of wire cut EDM via finite element (FE) analysis and axiomatic design. Two different wire cut EDMs are selected as analysis models. 3D CAD package I-Deas is first used to construct FE models of wire cut EDMs, and then ABAQUS FE code is used for following structural analysis. Pertinency of FE mesh refinement is discussed in terms of ${\eta}-factor$. It is shown that performance accuracy of EDM depends strongly on the structural characteristics. Some design enhancements are suggested in an axiomatic design point of view. Finally we provide weight and temperature induced displacement discrepancies between wire end points as position functions of each subframe.

• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.267-279
• /
• 1990

The adsorption mechanisms of phenols on XAD-2 and XAD-7 resins were studied by using the distribution coefficient(log Kd) measured in the optimum adsorption conditions. It was observed that the Langmuir adsorption isotherm, indicating a molecular size-dependent adsorption, was appropriate for characterizing the adsorption behaviors of phenols on XAD-2 and XAD-7 resins. The adsorption energies of phenols on XAD resins were calculated by Lennard-Jones potential equation. In the calculation of the adsorption energy, the molecular radii and dipole moments of the resins and phenols were calculated by their van der Waals volumes and Debye equation, respectively. The stacking factor (F) were determined from the radio of the equilibrium distance to the stacking distance of molecules. In order to explain the adsorption energy calculated from the stacking factor it was compared with the adsorption enthalpy for each of phenols which was experimentally determined by batch adsorption shake method. It was observed that the adsorption enthalpy of phenolate ions on the XAD resins was likely to be more seriously affected by dispersion interaction than by a dipole or a charge interaction.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.71-76
• /
• 1981

In order to make a numerical modeling for the one dimensional unsteady flow which expressed by Saint Venant partial differential equations, Preissmann's implicit scheme was used, and it's stability and accuracy was mentioned. By introducing recurrence relations make it possible to use double sweep algorithm. Effective parameters to the result were the values of the $\Delta$t/$\Delta$x, $\theta$ and the chezy coefficient. In oder to get numerical solutions with enough accuracy, $\Delta$t/$\Delta$x should not be far from the value of 1, and the criteria of the $\theta$ was 0.6<$\theta$<1.0 for the stability without condition. This model should be calibrated by real field data, and expected to be developed for the simulation of the river system and to the long wave analysis for one dimensional coastal zone problem.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.71-71
• /
• 2017

하천에서 평수기 유량측정은 도섭법을 이용하기 위한 지점식 측정보다는 초음파 도플러 유속계(ADCP, Acoustic Doppler Current Profiler)를 보트에 탑재하여 운용하는 측정 방식이 점차 일반화되고 있다. ADCP는 초음파의 도플러효과를 이용하여 수심이나 횡방향의 유속 분포를 측정할 수 있는 측정 장비로 일반적으로 사용되는 down-looking ADCP는 수심방향의 유속분포와 수심을 측정하여 보트의 이동속도와의 벡터 내적을 이용하여 유량을 산정하게 된다. 그러나, 이동식 ADCP 유량 측정 성과의 불확도는 제공되지 않고 있는 상황인데, 이는 불확도 산정 표준안 미비, 유속 및 수심 등 측정 요소의 관측 환경 별 불확도 정보 부족, 불확도를 산정할 수 있는 툴의 부재 등에 기인한다. 본 연구에서는 이동식 ADCP 불확도 산정 표준안을 개발하고 현장 실험을 통해 불확도 요인에 대한 규명, 불확도를 편리하게 산정할 수 있는 툴을 개발하고자 하였다. 불확도 산정 표준안으로 최근 WMO를 위시한 국제적으로 하천 유량 측정 불확도 표준안으로 채택되고 있는 GUM(Guide to the Expression of Uncertainty Measurement)을 기반으로 이동식 ADCP 유량 산정 알고리즘을 적용하여 불확도 적용 기법을 개발하였다. GUM 표준안을 기반으로 유량 측정불확도를 산정하기 위한 불확도 요인분석은 실규모 하천의 특성을 대부분 모의할 수 있는 한국건설기술연구원의 안동하천실험센터에서 수행된 실험자료를 기반으로 다양한 인자들에 대한 요소 별 불확도 분석을 수행하였다. GUM 표준안에 의하면 불확도 요인들은 오차전파의 법칙에 기반하여 전체 불확도에 전파되며, 이렇게 합성된 불확도는 t-분포의 신뢰수준 95%일 경우의 보정계수 2를 곱하여 최종적으로 확장불확도를 산정하게 된다. 이동측정방식의 ADCP의 경우 GUM 표준안에 적용하여 불확도를 평가하기 위해서 사용되는 수식이 방대하고, 매우 복잡하기 때문에 이를 실무자가 평가하기에는 한계가 있다. 이에 따라 본 연구에서는 ADCP의 유량 측정불확도를 보다 편리하게 평가하기 위하여 ADCP 유량 측정불확도 평가 소프트웨어인 AQUA(ADCP Discharge Uncertainty Assesment)를 개발하였으며, 이를 통해 실무자나 연구자들이 ADCP의 불확도 평가에 보다 편리하게 접근할 수 있을 것이라 판단된다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.25-32
• /
• 2008

Based on recent studies, the side resistance of rock socketed drilled shafts was affected by unconfined compressive strength of rock, socket roughness, rock types and joints, and initial normal stress. Especially, the socket roughness was affected by rock types and joints, drilling methods, and diameters of pile. In this study, a new roughness measurement system (BKS-LRPS, Backyoung-KyungSung Laser Roughness Profiling System) usable in water was developed. Based on the laboratory model tests, an EMD (Effective Measurement Distances) according to various turbidity was proposed as $EMD=1149.2{\times}T_{b}^{-0.64}$.