• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.433-439
• /
• 2012

In this paper, we proposed the triplexer using unit-cell of CRLH transmission line which has a bandpass characteristic to reduce adjacent channel interference. The input impedance of triplexer with each channel filter is operated open-circuit at the resonance frequencies of other channels. Such property is due to the combination a series and parallel resonance circuits of CRLH-TL unit-cell. The measured triplexer results are showed a measured insertion loss of each channel, less than 1.5 dB, matching at each port, less than 15dB and isolation between channel, better than 25 dB. Also, to validate the triplexer, a small signal amplifier with triple-band is designed and tested. the measured amplifier results show good agreements with prediction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.103-108
• /
• 2016

In communication systems the solution of the problem of maximizing the mutual information between the input and output of a channel composed of several subchannels under total power constraint has a waterfilling structure. OFDM and MIMO can be decomposed into parallel subchannels with CSI. Waterfilling solves the problem of optimal power allocation to these subchannels to achieve the rate approaching the channel capacity under total power constraint. In waterfilling, more power is alloted to good channels(high SNR) and less or no power to bad channels to increase the rate of good channels, resulting in channel capacity. Waterfilling finds the exact water level satisfying the power constraint employing an iterative algorithm to estimate and update the water level. In this process computation of partial sums of inverse of square of subchannel gain is repeatedly required. In this paper we reduced the computation time of waterfilling algorithm by replacing the partial sum computation with reference to an array which contains the precomputed partial sums in initialization phase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.86-92
• /
• 2011

In this paper, we propose a novel hardware MPI(Message Passing Interface) unit which supports message passing in multiprocessor system which use distributed memory architecture. MPI Hardware unit processes data synchronization, transmission and completion, and it supports processor non-blocking operation so it reduces overhead according to synchronization. Additionally, MPI hardware unit combines ready entry, request entry, reserve entry which save and manage the synchronized messages and performs the multiple outstanding issue and out of order completion. According to BFM(Bus Functional Model) simulation result, the performance is increased by 25% on many to many communication. After we designed MPI unit using HDL, with synopsys design compiler we synthesized, and for synthesis library we used MagnaChip $0.18{\mu}m$. And then we making prototype chip. The proposed message transmission interface hardware shows high performance for its increase in size. Thus, as we consider low-cost design and scalability, MPI hardware unit is useful in increasing overall performance of embedded MPSoC(Multi-Processor System-on-Chip).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.1-6
• /
• 2007

In this paper, the spiral zeroth-order resonance (ZOR) antenna using composite right- and left-handed (CRLH) transmission line is proposed. The zeroth-order resonant characteristics of the antenna are described by dispersion relation of a periodic structure. The size of the $2{\times}2$ spiral ZOR antenna is $0.155{\lambda}_{0}{\times}0.155{\lambda}_{0}$. By increasing shunt inductance of CRLH transmission line, the size of this antenna is reduced by 65% compared with that of a mushroom ZOR antenna. The radiation pattern of this antenna have omnidirectional pattern which is similar to that of mushroom ZOR antenna.

• Journal of Digital Contents Society
• /
• v.14 no.2
• /
• pp.191-197
• /
• 2013

To complete the "anywhere" mobile service there should not be shaded areas. However, it is never economical to deploy BS's (Base Stations) in a low population density area due to the low resource utilization. We propose a design technique to install RS's(Relay Stations) which are cheaper than BS's and find the condition in which the proposed technique is acceptible. The proposed design technique aims to allocate the frequency and time resources to RS's to minimize the transmission rate degradation due to interferences between RS's as well as to maximize the parallelism in transmission. We showed by simulation that the proposed technique achieves cost benefits when the expected traffic is less than 20.32 percent of the total BS capacity. The proposed technique is compatible with the IEEE 802.16j, thus can be extended to multi-hop configuration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.522-525
• /
• 2006

Recently, mobile devices support multi-functions such as 3D game, wireless internet, moving pictures, DMB, GPS, and PMP. Bigger size of display device is indispensable to support these functions and higher speed of the interface is needed. However, conventional parallel interfaces between processor and display nodule are not competent enough for that high speed transfers. High-speed serial interface is beginning to appear as an alternative for parallel interface. The advantages of the serial interface are high bandwidth, small number of interconnections, low-power consumption, and good quality of electro-magnetic interference. In this paper, we implement serial interface and use it for a display module. LVDS is used for PHY layer and a defined packet is used for link layer. The feature of the implemented serial interface is the reduced number of interconnections with enough bandwidth.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.345-349
• /
• 2004

In order to index exactly moving objects(vehicle, mobile phone, PDA, etc.) in the mobile database, continuous updates of their locations are inevitable as well as time-consuming. The studies of pure spatial indices have focused on the efficient retrievals. However, the acquisition and management of the terminal Location of moving objects are more important than the efficiency of the query processing in the moving object databases. Therefore, it will be need to adopt parallel processing system for the moving object databases which should maintain the object's current location as precise as possible. This paper proposes a architecture of spatial indexing mobile objects using multiple processors. More precisely, we newly propose a method of splitting buckets using the properties of moving objects in order to minimize the number of database updates. We also propose a acquisition method for gathering the location information of moving objects and passing the information of the bucket extents in order to reduce the amount of passed messages between processors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.486-493
• /
• 2010

This article introduces a novel ultra wideband(UWB) bandpass filter(BPF) with sharp roll-off characteristics in stripline structure. The UWB characteristic is basically obtained from capacitive coupled cross resonator. The resonator has ${\lambda}/2$ length. And at the center of the resonator, two stubs are loaded, one is a ${\lambda}/8$ short-circuited stub and the other is a ${\lambda}/8$ open-circuited stub. The two stubs provide two attenuation poles at lower and upper cutoff frequencies. For input and output lines, two identical capacitively coupled lines have been installed to suppress the unwanted signals in the lower and upper stopbands. The filter has been designed for the U.S. UWB band(3.1~10.6 GHz) with two transmission zeros at 2.4 and 11.1 GHz. The filter has been realized with Low Temperature Core-fired Ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. Insertion loss less than 0.7 dB and return loss better than 14 dB in the pass band have been measured. The group delay in the center frequency is 0.27 ns and the group delay variation within pass band is less than 0.5 ns. The size of the filter is $6{\times}18{\times}0.6\;mm^3$.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.237-246
• /
• 2000

A broadband access network in B-ISDN subscriber network, plays a role of concentration or multiplexing of various subscribers into a service node. For call and connection control functions, DSS2 and B-ISUP signalling protocols are standardized for each of a subscriber side and a network node. B-BCC and B-ANCC protocol were proposed for VB5.2 interface. This interface allows dynamic control of ATM connections at the broadband access network. To establish an end-to-end ATM connection, interworking functions between VB5.2 interface's connection control protocol and the signalling protocol, are performed at the service node. A sequential interworking model and a parallel interworking model were proposed for these interworking functions. The sequential interworking model recommended by ITU-T causes an overall connection setup delay by introducing the access network, because this model proceeds the signalling protocol of network node after the response of VB5.2 interface protocol. On the other hand, the parallel interworking model proceeds the signalling protocol and the VB5.2 interface protocol simultaneously. The simultaneity of the parallel interworking model minimizes the overall connection setup delay. In this paper, we analyze and simulate above two interworking models with B-BCC or B-ANCC protocol in terms of a connection setup delay and completion ratio.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.335-343
• /
• 2024

Real-time target signal processing techniques for FMCW LiDAR are described in this paper. FMCW LiDAR is gaining attention as the next-generation LiDAR for self-driving cars because of its detection robustness even in adverse environmental conditions such as rain, snow and fog etc. in addition to its long range measurement capability. The hardware architecture which is required for high-speed data acquisition, data transfer, and parallel signal processing for frequency-domain signal processing is described in this article. Fourier transformation of the acquired time-domain signal is implemented on FPGA in real time. The paper also details the C-FAR algorithm for ensuring robust target detection from the transformed target spectrum. This paper elaborates on enhancing frequency measurement resolution from the target spectrum and converting them into range and velocity data. The 3D image was generated and displayed using the 2D scanner position and target distance data. Real-time target signal processing and high-resolution image acquisition capability of FMCW LiDAR by using the proposed parallel signal processing algorithms based on FPGA architecture are verified in this paper.