• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.85-89
• /
• 2014

In this paper, we present a speckle-free digital hologram with conversion to an off-axis horizontal-parallax-only (HPO) hologram. First, we record the speckle-free hologram using optical scanning holography. Second, we digitally convert the full-parallax hologram to a horizontal-parallax-only hologram. Third, we convert the horizontal-parallax-only hologram to an off-axis hologram. Finally, we show that the off-axis HPO hologram can be numerically reconstructed in space.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.218-219
• /
• 2003

Wavelength Division Multiplexed (WDM)과 Time Division Multiplexed (TDM) 광 네트워크에서 전광 파장변환은 미래 초고속통신의 핵심 기술이다. 파장변환장치는 정보 소통량 관리에 유연성을 부여함과 동시에 광 네트워크의 동적 재구성을 용이하게 한다. 최근에 주기적 분극을 가진 LiNbO$_3$ 도파로를 이용한 몇몇 파장변환실험들이 성공적으로 수행됨으로써, Difference Frequency Generation (DFG)와 같은 2차 비선형 분극을 이용한 파장변환 장치에 대한 관심이 증대되고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.16-17
• /
• 2003

지난 수년간 인터넷 보급에 따른 급격한 통신량 증가에 따른 요구는 차세대 통신 기술인 WDM을 구축하게 되었고 이에 따라 WDM 라우팅 기술과 스위칭 기술이 절실히 필요로 하게 되었다. WDM에 있어서 다른 경로나 목적지로 신호를 보내기 위해서는 신호의 파장이 변환 되어야 하므로 신호의 파장변환은 라우팅에 있어 핵심적인 기술 중 하나로 인식되어지고 있다 현재 사용되어지고 있는 전광 파장 변환기는 주로 SOA (Semiconductor Optical Amplifier)의 비선형 특성인 XGM, XPM, FWM등을 이용한 것으로서 편광 민감성, ASE에 의한 SNR 감소, 신호크기 변형과 높은 가격으로 인해 안정적인 파장변환기로 쓰기에는 다소 무리가 있다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.245-256
• /
• 1995

Rugate filters of inhomogeneous refractive index were designed using the Fourier transform and the effect of reflectance, stop bandwidth, optical thickness, and Q function on the rugate filter was investigated. An iterative correction process using a merit function was employed to fit an initial design to the target spectrum. Three Q functions derived by Sossi, Bovard, and Fabricius, respectively, were compared in terms of the number of iteration, merit function, and optimum optical thickness. The result shows that after a number of iterations the Q functions by Bovard and Fabricius produce high rejection rugate filters closer to the target spectrum than the Sossi's Q function and the optimal optical thickness is determined by the stop-band width of the rugate filter. ilter.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.193-197
• /
• 2000

A polarized mode convertible, wavelength tunable optical filters with acoustic barriers and acousto-optic effect have been produced in LiNb03 substrate utilizing the Ti double diffusion technique. Polarization conversion in excess of 81 % and a spectral width of -200 kHz (-1.83 nm) were achieved at a wavelength of 1551.6 nm and RF frequencies of 173.07 kHz and 173.05 kHz for both transverse electric (TE) and transverse magnetic (lM) input polarizations, respectively. The electrical driving power was 10.97 mW and reduced to about 10% of one for an optical filter without an acoustic barrier. A linear tuning rate of 8.2 nmlMHz and sidelobe intensity of -4 dB was demonstrated. rated.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.411-417
• /
• 1994

The electro-optic polarization transmission characteristics of a liquid crystal (LC) cell is represented by a rotational transformation on the Poincare sphere, and its characteristic parameters, the angle and the axis of the rotation, are experimentally determined with respect to the voltage applied to the LC cell. From the experimental data obtained, we determine driving voltage for the LC cell to give the rotation angle near $180^{\circ}$ of the rotation for the change of the state of the LC cell from non-select to select state, which is a necessary condition for the realization of maximally bright images. The directions of the transmission axes of the polarizer and the analyzer which form a liquid crystal display panel together with the LC cell, are determined from the general characteristics of the rotaional transformation of the LC cell. cell.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.454-459
• /
• 2003

We report the first demonstration of 10 Gb/s wavelength conversion in a Mach-Zehnder interferometric wavelength converter monolithically integrated with a loss-coupled DFB probe source. The integrated device is fabricated using a BRS (buried ridge stripe) structure with an undoped InP clad layer on the top of a passive waveguide to reduce high propagation loss. The device exhibited a static extinction ratio of 11 dB. Good performance at 10 Gb/s is obtained with an extinction ratio of 7 dB and a power penalty of 2.8 dB at a 10$^{-9}$ bit error rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.360.2-360.2
• /
• 2014

박막 태양전지의 변환효율을 높이기 위해 전면에는 반사방지막을, 후면에는 고반사막을 적용한다. 태양전지 구조에서 고반사막을 대신하여 선택적 투과막을 적용할 경우 가시광선은 투과하고 적외선은 광 흡수층으로 재반사되기 때문에 변환효율을 향상 시킬 수 있고 동시에 투명 태양전지를 얻을 수 있다. 선택적 투과 특성을 보이는 지르코니아 박막의 광학적 특성이 이미 보고된 바 있으며, 본 연구에서는 반응성 스퍼터링 방식을 이용하여 지르코니아 박막을 증착하고 산소 유량에 따른 광학적 특성을 관찰한 후 이를 통해 선택적 투과막 성장에 적합한 산소 유량 조건을 얻고자 하였다. 산소 유량에 따라 지르코니아 박막의 투과율은 400 nm 이상의 파장에서 약 10%에서 약 85%의 범위에서 변화하였고 반사율은 적외선 영역에서 최소 약 30%에서 최대 약 60%의 수치를 나타내었다. 이러한 결과로부터 반응성 스퍼터링 시 산소 유량이 지르코니아 박막의 광학적 특성 변화에 큰 영향을 미치는 인자임을 확인하였다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.119-122
• /
• 2000

We proposed a novel mode shape converter (MSC) that can effectively reduce the coupling loss between polymer rib waveguide and single mode fiber. The double-nb geometry that was used in the novel MSC converted an elliptical mode to circular mode and an circular mode to elliptical mode. This structure can be easily realized by using the typical fabrication process for polymer wavegUide. Simulation using a three dimensional beam propagation method showed that the novel MSC has a coupling loss of 0.079 dB/facet and total lllsertioll loss of less than 0.2 dB. .2 dB.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2007

We have studied depth conversion of a reconstructed image by means of recombination of the elemental images in the integral imaging system for 3D display. With the recombination, depth conversion to the pseudoscopic, the orthoscopic, the real or the virtual as well as to arbitrary depth without any distortion is possible under proper conditions. The conditions on the recombinations for the depth conversion are theoretically derived. The reconstructed images using the converted elemental images are presented.