• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9C
• /
• pp.955-963
• /
• 2005

In this paper, we consider the noncoherent code acquisition problem using sequential schemes. We show that the outputs of the noncoherent receiver approximately have a central chi-square distribution under the null hypothesis through simulations. Based on this observation, simplified acquisition schemes are obtained using the approximations of the Bessel function. The performance of the simplified and original schemes are compared in additive white Gaussian noise and slowly varying fading channels. Numerical results show that the simplified schemes have essentially the same performance as the original schemes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.26-32
• /
• 2013

The earth reflection effect on the induced voltage by line source such as power line occurring induction inteference is analyzed to scrutinize how much it would reduce the induced voltage. Using hankel transformation including bessel function, directly calculation formulae for extracting a refelction coefficient is a most important technical application in this paper since the reflection coefficient on the earth cannot be deduced by a general coefficient calculation formulae according to a plain wave. The electric field is utilized to transform the electromagnetic field into an induced voltage. The composed efficiency to a source induction voltage by an earth reflection is about a range of 60~70% for the axis constellation of each object like observation point, source position and other material parameters.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.594-601
• /
• 2016

Mass estimation analysis of loose-parts in pressure vessel is necessary for the structural integrity assessment of pressure boundary in nuclear power plants. Mass of loose-parts can be generally estimated from the peak values and the center frequency of impact signals. Magnitude of impact signals is, however, inevitably attenuated according to the traveling distance of the signals and depending on the frequencies. Attenuation rate must be therefore carefully compensated for the precise estimation of loose-part mass. This paper proposes a new compensation method for the attenuation rate based on Bessel function instead of Hankel function in conventional method which has a limitation of usage in near the impact location. It was verified that the suggested compensating equation based on the Bessel function can be applied to the attenuation rate calculation without any limitation.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.518-525
• /
• 2012

The modulation transfer function is generally used as a method to estimate the characteristics of this kind of optical system because it cannot reappear or implement image of the object perfect. By the way, it is difficult to assess the optical system with existing MTF method since the reaction between diffraction and aberration of aperture is very complicate if the aberration is very small. The MTF has to be calculated considering the numerical aperture, defocusing, OPD and phase difference. We validate its feasibility using bessel function as an estimating method, and then realize it through illustration in this paper.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.564-574
• /
• 1996

This paper describes as Electronic Speckle Pattern Interferometry system which has been designed for measuring vibration patterns and quantitative measurement of vibration amplitude fields by using the time average method on a object. Visbility of fringe patterns is more improved by using the phase stepping and frame average method to reduce speckle and electric noise. And a bias vibration is introduced into the reference beam to shift the $\frac{2}{0}$ fringes so that fringe shift algorithms can be used to determine vibration amplitude. The experimental results are compared to those of the FFT analyzer and the FEM model analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.10
• /
• pp.3152-3159
• /
• 1996

Previous works about the cylindrical shape elastic body which is under longitudinal temperature distribution mostly show the results of free expansion, therefore exact thermo-elastic analysis is needed. The object of this work is to analyze the thermo-elastic problem of the hollow cylinder when the cylinder is under longitudinal temperature distribution. In this paper, the analytical solution is found by using Galerkin vector, and it is compared by the results of FEM. For displacements of cylinder, analytical values are almost same as the results of FEM, but free expansion is not fit for analytical solution and the results of FEM. stresses from analytical solution and the results of FEM show good agreement also. but the results are different near the end boundary, since St. Venant principle is applied.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.984-989
• /
• 2009

The present study has been conducted to predict the temperature distribution in the core of the scraper type ice generator. The analytic model was simplified as the flow in the annular type cylinder, which had an inside wall moving in axial direction due to the rotation of screw and a fixed outside wall. The governing equations were arranged by the method of separation of variables. The results corresponded to the exact solutions of the Bessel function. The qualitative results such as general characteristics of heat transfer in annulus flow from outer cylinder wall to the inside wall were obtained. However the amount of the heat transfer was underestimated as low as $1/5{\sim}1/6$ of the designed value.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.914-921
• /
• 1999

There are many theoretical investigations to analyze higher order mode of reactive type single expansion chambers with offset inlet/outlet locations. But the conventional method has the restriction that the ratio between the area of inlet(or outlet) pipe and that of chamber must be natural number. In the paper, a new method was suggested to apply the Kim's method to silencer with circular cross-section. Not only the offset location but also the magnitude of cross-section area of inlet/outlet pipe can be considered by the suggested method. The predictions by this new method also compared with those by the finite element method and Munjal's method in order to verify the accuracy of the suggested method presented here.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.580-580
• /
• 2013

공정 플라즈마에서 사용할 수 없는 단일 랭뮤어 탐침법의 단점을 극복하기 위해서 부유 고조화파 탐침법이 개발되었고, 개선되어왔다. 다중 주파수를 인가하여 발생하는 고조화파 신호들 중 상호간섭주파수의 진폭을 이용하는 Sideband 방법과 원신호의 주파수 진폭을 이용하는 이중 주파수 방법이 있는데, 본 연구에서는 위와 같이 응용된 방법들과 기존의 부유 고조화파 탐침법의 장단점을 파악하고, 차이점을 규명하였다. 플라즈마 변수를 이끌어내기 위해 사용된 베셀함수의 민감도를 통해 특정 전자온도 영역에서의 각 방법들의 신뢰성을 비교해보았고, 측정값에서의 차이를 주파수 응답 특성 차이 및 전자 에너지 분포의 차이로 설명하였다. 이런 비교 연구를 통해 상황 별 적합한 측정 방법을 선택적 이용할 수 있을 뿐만 아니라, 이를 통해 측정하는 플라즈마 변수의 신뢰성을 향상시킬 수 있을 것으로 예상된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1451-1457
• /
• 1992

In hot strip rolling, the thickness of strip cannot be retained uniform by several irregular parameters. It has been shown that the load distribution can affect only a small fraction of the excess strip crown, whereas the thermal effects of working roll are the major reason on large changes in the strip center crown during hot rolling. In this study, the temperature distribution of working roll is represented by fourier series expansion. The analytical solution of the resulting thermo-elasticity problem is obtained by love's strain function. The results which are compared with those of the finite element method show good agreements.