• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.352-355
• /
• 2003

비자성이며 비전도성의 물리적 성질을 갖는 자연산 퀄쯔(quartz)와 용암석 스코리아를 대상으로 마그네타이징 처리를 하여 분석하였다. 마그네타이징 처리를 위하여 강력한 기계화학적 분쇄 반응을 시켰으며, 분쇄 반응시 알코올계의 솔벤트를 반응 용매로 사용하였다. 퀄쯔와 스코리아의 마그네타이징 처리에서 비교적 비중이 큰 퀄쯔의 경우와 비중이 작은 스코리아의 경우에도 분쇄된 분말이 물에 뜨는 것을 확인할 수 있으며, 친유성으로 기름에 대한 흡착 성질이 우수함을 확인하였다. 자연산 퀄쯔와 함께 스코리아를 바탕물질로 하여 기계-화학적 반응 기술로 고 분산성 흡착반응에 의한 고분자 물잘 생성을 유도하여 나노복합체를 제조하였다. 반응의 처리조건과 적용과정에 따라서 기계-화학적 반응을 통하여 얻어진 물질은 자기적 성질과 유전체 및 전기적 성질을 동시에 나타낸다. 부착성 융합 복합물질의 특징을 고려하여 시그니토마그네틱스(Segneto-magnetics)로 분류되는 합성분말은 특히 유류성분에 대하여 높은 흡착성을 가지며, 강한 자기적 성질을 띄는 10-50 nm 두께의 하나 또는 그 이상의 이질적 융합 화합물 층이 석영이나 수정체의 표면에 합성되어 특유의 자기, 전기적 성질을 나타낸다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.1
• /
• pp.25-30
• /
• 2005

수소 분위기에서 10wt.%MnO와 기계적인 분쇄(반응성 기계적 분쇄)에 의해 Mg의 수소 저장 성질을 향상시켰다. 회전 속도는 250 rpm, 밀링시간은 2 h, 그리고 시료 대 볼 중량비는 1/45이었다. 준비한 Mg-10wt.%MnO 시료는 활성화를 위한 수소화물 형성 분해 싸이클링이 필요없었으며, 첫 번째 싸이클 593k 12 bar $H_2$에서, 10분 동안에 3.12wt.%, 60분 동안에 3.95wt.%의 수소를 흡수하였다. 또한 Mg-10wt.%MnO는 593k 0.8 bar $H_2$에서 60분 동안에 2.12wt.%의 수소를 방출하였다. MnO와 Mg의 방응성 분쇄는, 핵생성을 용이케하고 (Mg 입자의 표면에 결함 형성과 첨가물에 의해), Mg 입자의 표면에 crack을 만들어 Mg의 입자 크기를 줄여 그 결과 수소 원자의 확산 거리를 작게 함으로써 수소 흡수 방출 속도를 증가시킨다. 수소화물 형성 분해 싸이클링은 Mg 입자의 표면에 crack을 만들고 Mg의 입자 크기를 줄여 수소 흡수 방출 속도를 증가시킨다.

• Microbiology and Biotechnology Letters
• /
• v.14 no.5
• /
• pp.407-413
• /
• 1986

In an agitated bead reaction system, the enzymatic saccharification of uncooked starch was substantially enhanced. The enhancement mechanism was investigated front the view of the structural aspect of starch. The mechanical impact caused by the movement of the attrition-milling media resulted neither the destruction of microcrystalline structure nor the fragmentation of starch granule. instead, the most distinct phenomenon was the swelling of starch granule up to about 2.5 times, and the swelling mechanism was not similar with that caused by cooking. However, in the case of the enzyme addition in the attrition coupled reaction system, the swollen starch was easily fragmented into the large number of small particles by the synergistic action of the enzyme and milling-media. The exposed surface area of the fragmented particles plays the major role in enhancing the saccharification. The saccharification rate was quite different depending on the source of starch, the reason was discussed in terms of the granular structure of uncooked starches.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.3-11
• /
• 2014

Bottom ash from coal fired power plants is not widely used due to a broad range of particle sizes and a high carbon content for producing geopolymers. The effect of mechanical activation on compressive strength of bottom ash- based geopolymers was examined by rod and planetary-ball milling to encourage full-fledged recycling of bottom ash, the main component of pond ash. The amount of amorphous component in the milled ash samples did not change significantly after the mechanical activation. It is presumably because needle-shaped mullite crystals, which is a major crystalline phase and grown in a glassy matrix, possess high strength and toughness, and therefore, they could endure external shocks and remain almost intact. Milling operation, however, decreased the particle size and improved the homogeneity of ash, thereby leading to increase reactivity of milled ash with alkali activators. Rod milling produced a relatively narrow particle size distribution of the milled ash particles; however, it was less effective in reducing the particle size. Nevertheless, it was interesting to observe that rod milling had equal effect on improving the compressive strength of geopolymers up to about 37%, as that of planetary ball milling. Rod milling is believed to be suitable process for enhancing the reactivity of bottom ash for large-scale recycling of bottom ash and producing geopolymers.

• Microbiology and Biotechnology Letters
• /
• v.18 no.3
• /
• pp.260-267
• /
• 1990

The mechanism of enzymatic hydrolysis of raw corn starch by the purified glucoamylase and a - amylase in an agitated bead reaction system was studied by investigating the changes of sugar profiles produced by each enzyme, the granular structure of raw corn starch, the amount of enzyme adsorption on residual starch, and the amylose content in residual raw starch. The sugar profiles produced by the action of exo-type glucoamylase or endo-type $\alpha$ -amylase in an agitated bead system were not recognizably differed with those produced in reaction system without bead. Without enzyme the intergenic microcrystalline structure of starch granule was not changed by the simple mechanical impact of solid media, but it was cleaved. However, starch granule was fragment into large number of small particles by the synergistic action of enzyme and attrition-milling media, identified to be the major saccharification enhancing mechanism along with the increased amount of enzyme adsorption. The amylose content decreased more readily in an agitated bead reaction system, especially by $\alpha$ -amylase.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.69-74
• /
• 2006

The effects of mechanical grinding(MG) treatment on the hydrogen storage of $Mg_2Ni$ alloy and $Mg_2Ni$ composite alloy($Mg_2Ni+graphite$) were investigated by pressure-composition-temperature(PCT) measurement, the micro-electrode technique of electrochemistry and etc, in which PCT was measured at high temperature(around $300[^{\circ}C]$) of gas phase and a carbon-filament micro-electrode for electrochemical evaluation was manipulated to make electrical contact with the particle in 1M KOH aqueous solution. It was found that the hydrogenation properties of $Mg_2Ni$ and graphite composite particle were greatly improved by the mechanical grinding treatment by which the $Mg_2Ni$ and graphite composite alloys could be changed into microstructure and nano-level particles. namely; the hydrogen dissociation pressure of PCT measurement was decreased from 0.55[MPa] to 0.42[MPa] and hydrogenation peaks by micro-electrode were also observed more clearly on the same sample.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.57-64
• /
• 2018

Water leaching of tungsten(W) and vanadium(V) was researched from their oxides through mechanochemical (MC) reaction with alkali compounds. Intensive grinding for the mixture of tungsten/vanadium oxide and alkali compounds (NaOH, $Na2CO_3$) was carried out with change of their mixing ratios and grinding duration. Water soluble compounds, $Na_2WO_4$ and $NaVO_3$, were synthesized through MC reaction and their solubilities increased in proportion to the mixing ratio of sodium compound and grinding times. Whereas vanadium leachability was less affected by the mixting ratio and grinding times. The leachabilities of 99.0% were accomplished by a short period of MC treatment, W (30 min.) and V (5 min.). This process enable us to extract W and V from their oxides via a water leaching, and can be applied to the selective recovery of W and V from $DeNO_x$ spent catalysts.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.223-231
• /
• 1995

Mechanical alloying behavior of the PbTe intermetallic compound, which is used for thermoelectric generation, has been investigated with milling time and ball-to-powder weight ratio. Formation of PbTe alloy was completed by mechanical alloying of the as-mixed Pb and Te powders for 2 minutes at ball-to-powder weight ratio of 2 : 1. In situ measurement of the abrupt temperature rise during the ball milling process indicated that the PbTe intermetallic compound was formed by a self-sustained reaction rather than diffusional reactions. Lattice constant of PbTe alloy fabricated by mechanical alloying, 0. 6462nm, was not varied with milling time and ball-to-powder weight ratio. This value of the lattice parameter is in excellent agreement with 0.6459nm, which was reported for PbTe powders processed by melting and grinding.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.514-519
• /
• 2020

Graphite materials for lithium ion battery anode materials are the most commercially available due to their structural stability and low price. Recently, research efforts have been conducted on carbon coatings by improving side reactions at the edge site of carbon materials. The carbon coating process has classified into a CVD by chemical reaction, wet coating process with solvent and dry coating by mechanical impact. In this paper, the rapid crush/coating process was used to solve the problem of which only few parts of the carbon precursor (pitch) can be used and also environmental problems caused by solvent removal in the wet coating process. When the ratio of needle coke to pitch was 8 : 2 wt%, and the rapid crush/coating process was carried out, it was confirmed that the fracture surface was coated by pitch. The pitch-coated sample was treated at 2400 ℃ and 41.8% improvement in 10C/0.1C rate characteristic was observed. It is considered that the material simply manufactured through the simple crush/coating process can be used as an anode electrode material for a lithium ion battery.

• Journal of the Speleological Society of Korea
• /
• no.63
• /
• pp.1-8
• /
• 2004

The non-magnetic materials with non-conductive showing high structure dispersity were developed on the base of natural quartz and lava-scoria which was collected from Je-ju island in Korea, and treated by methane-chemical technology those were obtained novel properties of magnetization through the analyzing. Depending on the processing conditions and subsequent applications the materials produced by strong methane-chemical reaction (MCR) in alcohol solution showed concurrently magnetic, dielectric and electrical properties. The obtained magnetic-electrical powders classified by aggregate complex of their features as segnetomagnetics, containing a dielectric material as a carrying nucleus, particularly the quartz on that surface one or more layers of different compounds were synthesized having thickness up to 10～50 nm and showing magnetic, electrical and other properties. It was confirmed in magnetizing process that powders of quartz and lava-scoria produced by MCR were better oil adsorbent as of oleophilic and floating matter on water surface although their specific gravities are comparably more than 1 in quartz or less than unity, as that of water, in lava-scoira. Therefore, it will be Possible and very useful to remove low density and light gravity oil spillage in difficult recovery from sea and inland water contamination spread on water surface, by marine accident and ship sinking accident occurring frequently in recent years, by way of magnetic adsorbent conveyer system in continuous, if it could be built up the mass Production system of water-floating magnetizable oleophilic adsorbent materials with use of iow cost and good Qualify lava-scoria spread on volcano district in Je-ju island. And, there will also be urgent advent of necessity with strong possibility to develop useful applications of various magnetic functional materials include oleophilic adsorbent for removal of sea oil-contaminants and maritime pollutants, and other kinds of various utilities in industrial applications and practical uses of novel functional materials in the fields of environments and health care applications with in deep expectation.