• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.248-253
• /
• 2004

We propose a near- field scanning optical interferometer (NSOI) based on the facet reflection of a nano-sized moveable tapered optical fiber. The interferometer can measure the position and the wave-front of a focused spot simultaneously. The interfering fringes are generated by the reflected beams from the sample surface and from the fiber facet. The wave-front analysis at the focusing position is obtained by using a phase shifting technique with a four-step algorithm. It is found that the resolution for controlling the focal position of our proposed NSOI is less than λ/3 and the measured wave-front aberration at the focal position is in good agreement with the ones obtained by a Twyman-Green interferometer.

• Geophysics and Geophysical Exploration
• /
• v.21 no.2
• /
• pp.94-102
• /
• 2018

To characterize virtual reflection images of deep subsurface by the method of seismic interferometry, we analyzed effects of offset range, ambient noise, missing data, and statics on interferograms. For the analyses, seismic energy was simulated to be generated by a 5 Hz point source at the surface. Vertical components of particle velocity were computed at 201 sensor locations at 100 m depths of 1 km intervals by the finite difference method. Each pair of synthetic seismic traces was cross-correlated to generate stacked reflection section by the conventional processing method. Wide-angle reflection problems in reflection interferometry can be minimized by setting a maximum offset range. Ambient noise, missing data, and statics turn to yield processing noise that spreads out from virtual sources due to stretch mutes during normal moveout corrections. The level of processing noise is most sensitive to amplitude and duration time of ambient noise in stacked sections but also affected by number of missing data and the amount of statics.

• Korean Journal of Optics and Photonics
• /
• v.2 no.4
• /
• pp.193-196
• /
• 1991

Reflection holographic filters are developed. Dichromated gelatin films are used for the recording material, and a modified processing method of obtaining high-quality filters is developed. The diffraction efficiency and bandwidth of the fabricated holographic filter is 93% and 17 nm, respectively. The effect of exposure on the spectral bandwidth and center wavelength of the developed filters are measured, and the characteristics of the dichromated gelatin film are investigated from these results.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.60-61
• /
• 2000

표면 형상을 측정하는 방법은 샘플표면의 평평도, 곡률, 거칠기, 깊이 측정등의 수많은 상업적 응용을 위해 광범위하게 개발되어왔다. 이중에서도 특히 간섭현상을 이용한 광 표면 프로파일러는 표면의 3차원 구조를 측정하는데 있어서 subangstrom의 매우 높은 깊이 분해능을 가지므로 샘플 표면의 정밀 진단에 많이 사용되어 왔다. [1,2] 광 간섭 현미경은 기본적으로 광위상 변화를 검출하여 그것을 표면구조변화로 바꾸어주는 역할을 한다. 그러나 광위상 변화는 샘플 표면의 구조뿐만 아니라 물질 변화와 박막두께 변화에도 민감하므로 순수한 표면구조측정은 샘플이 단일물질인 경우에만 달성된다는 문제점이 있다. 따라서 이러한 광위상 측정과 관련된 ambiguity를 해결하기 위해서는 일반적인 광 간섭 현미경에서 얻어지는 위상데이터와 더불어 물질변화를 분석할 수 있는 다른 추가적인 데이터가 필요하다. 이러한 필요성 때문에 우리는 광위상 뿐만 아니라 반사율 분포도 동시에 측정할 수 있는 새로운 방식의 다출력단 호모다인 간섭계(Homodyne I/Q Interferometer; HIQI)를 구성하였으며[3], 그 실험장치도는 [Fig. 1]과 같다. HIQI는 in-phase and quadrature 검출방식에 기반을 두며, 이 검출방식은 PBS에서 반사되는 빛살과 투과되는 빛살 사이의 위상차가 $\pi$/4라는 실험결과로부터 달성된다. HIQI는 샘플 표면의 3차원 구조 뿐만 아니라 광학적 특성의 2차원 분포도 동시에 얻을 수 있다. (중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.819-830
• /
• 2017

An FM radio based PCL system is a passive radar technique for detecting the multiple moving targets from FM radio signals and tracking the trajectories of the targets by calculating the cross-correlation function of direct-path signal and target echo signals. However, the interference signals are received from a surveillance channel, which is designed to receive the target echo signals. Because of this problem, the target echo signals are masked by the strong interference signals and this makes it difficult to detect the true targets from the cross-correlation function. Adaptive filters are known as effective methods for suppressing the interference signals but there is a problem to present their accurate performances in the PCL system because many literatures used the cross-correlation function and the ratio of input and output power as a measure of the performance analysis. In this paper, a performance analysis method is proposed to evaluate the performance of interference cancellation algorithms. By using the property that each component of the filter weight vector is adjusted to suppress the specific interference signal, a performance measure of the interference signal suppression is defined by a function of adaptive filter weights. Based on the proposed method, we compare the performance of the adaptive filters used in the PCL system. Simulation results show that the proposed method can be very effective for evaluating the performance of interference cancellation algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.157-160
• /
• 2001

본 논문은 근거리에서의 차량간 통신에 밀리미터나 광전파를 분석하는데 효과적인 Ray Tracing방법을 도입하여 오율특성을 분석하였다. 분석환경으로는 간섭신호에 강한 장점을 지니며 산소흡수에 의한 감쇠가 크며 주파수 재사용효율이 좋은 60GHz 대역에서의 비트오율을 분석하였다. 전파모델로 지면반사파, 콘크리트벽에 의한 반사와 옆 도로를 달리는 차량에 의한 반사를 고려한 Two-Ray 라이시안 채널에서의 다중접속자에 의한 DS/CDMA 시스템의 비트오율특성을 분석하여 검토하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.746-751
• /
• 1998

There are several methods capable of determining he magnitude of optical anisotropy, such as spectrometric ellipsometry and polarized light reflectometry. The interference method is estimated to be no influence of surface scattering. The magnitude of anisotropy is a-As/sub 40/Ge/sub 10/S/sub 35/Se/sub 15/ thin film is analyzed by the reflection interference analysis method based on the difference depending on a phase of s- and p-polarized light. The theoretically analyzed value is compared with the result obtained by the measured technique.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.303-316
• /
• 2005

Strong radar returns were observed in oyster sea farms, and coherent interferometric pairs were successfully constructed. Tide height in coastal area is possible to be measured by using interferometric phase and intensity of SAR data. This SAR application technique for measuring the tide height in the near coastal zone can be further improved when applied to double bounce dominant areas. In this paper, we investigate the characteristics of polarimetric signature in the oyster farm structures. Laboratory experiments were carried out using Ku-band according to the target scale. Radar returns from vertical poles are stronger than those from horizontal Pole by 10.5 dB. Single bounce components were as strong as double bounce components and more sensitive to antenna look direction. Double bounce components show quasi-linear relation with the height of vertical poles, which implies double bounce is more useful to determine water level than total power. A L-band NASA/IPL airborne SAR (AIRSAR) image was classified into single-, double-bounce, and volume scattering components. It is observed that oyster farms are not always characterized by double bounced scattering. Double bounce is a main scattering mechanism in oyster farms standing above seawater, while single bounce is stronger than double bounce when bottom tidal flats are exposed to air. Ratios of the normalized single to double bounce components in the former and latter cases were 0.46 and 5.62, respectively. It is necessary to use double bounce dominant sea farms for tide height measurement by DInSAR technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.62-70
• /
• 2000

Intelligent vehicles are equipped with radar sensors for collision avoidance. We present a method of suppressing mutual interference among pulse-type radars, where all the radars are standardized. We developed a method of separating the true self-reflection from the false one by controlling the pulse emission of a radar in anorhogonal ON, OFF pattern. Interference signal identified in OFF-intervals is recorded to indicate the positions of the expected ghosts in ON-intervals. PFA and PM are derived for a radar system with I-Q demodulation scheme, where Gaussian noise alone is Rayleigh-distributed and Gaussian noise plus reflected radar pulse are Rician-distributed. The value of the threshold adaptively updated in order to prevent the deterioration of PM. In the experimental result, PFA decreases by an order of 10,000, when compared with the conventional M of N majority voting method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.263-268
• /
• 2001

This paper analyzes error probability performance adopted the Ray Tracing method efficiently analyzing millimeter wave or optic wave in Inter Vehicle Communication(IVC). Analysis environment analyzed bit error characteristic in 60㎓ band with very powerful to multipath wave, to be large to oxygen absorption and to be good to frequency reuse efficiency. We analyzed bit error characteristic of DS/CDMA system by multi access user in Two-Ray rician channel adopted reflect wave of grand, reflect wave of concrete wall and reflect wave of driving vehicle at side road. Improvement performance is adopted MRC diversity.