• Title/Summary/Keyword: 반구형

Search Result 260, Processing Time 0.025 seconds

Experimental Study on Underwater Transient Noise Generated by Water-Entry Impact (입수 충격 수중 순간 소음에 대한 실험적 연구)

  • Jung, Youngcheol;Seong, Woojae;Lee, Keunhwa;Kim, Hyoungrok
    • The Journal of the Acoustical Society of Korea
    • /
    • v.33 no.1
    • /
    • pp.10-20
    • /
    • 2014
  • To study the water-entry impact noise, on-board experiment using a small launcher firing various objects was performed in the Yellow Sea. As the launcher fires a cylindrical object from the ship vertically, generated noise is measured with a hydrophone on the starboard of Chung-hae, Marine surveyor. Three types of cylindrical objects, which have noses of flat-faced, conical, and hemisphere, were used during the experiment. The measured noise exhibits a time-dependency which can be divided into three phases: (1) initial impact phase, (2) open cavity flow phase, (3) cavity collapse and bubble oscillation phase. In most cases, the waveform of bubble oscillation phase is dominant rather than that of initial impact phase. Pinch-off time, where a cavity begins to collapse, occurs at 0.18 ~ 0.2 second and the average lasting time of bubble was 0.9 ~ 1.3 second. The energy of water-entry impact noise is focused in the frequency region lower than 100 Hz, and the generated noise is influenced by the nose shapes, object mass, and launching velocity. As a result, energy spectral density on the bubble frequency is higher in the order of flat-faced, conical, hemisphere nose, and the increase of initial energy raises the energy spectral density on the bubble frequency in the cylinder body of same shape. Finally, we compare the measurements with the simulated signals and spectrum based on the bubble explosion physics, and obtain satisfactory agreements between them.

Basic characteristics of an indented cylinder broken rice separator (원통형 홈 선별기의 쇄미선별 특성)

  • 순영석;김명호;박승제;이종호
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.02a
    • /
    • pp.282-288
    • /
    • 2002
  • 본 연구는 상업용 규모의 쇄미선별공정에 사용할 수 있는 파이로트 규모 원통형 홈 선별기 시작기의 설계 및 제작에 필요한 기초 연구로서, 실험실용 원통형 홈 선별기를 이용하여 쇄미선별 실험을 실시하였다. 원통 회전속도, trough각도, indent 크기와 형상, 공급량을 요인으로 하여 완전립의 수거율과 순도, 쇄립의 수거율과 순도 및 선별효율을 조사하였다. 수행한 연구결과를 요약하면 다음과 같다. 1. 선별효율에 대한 원통 회전속도와 trough각도의 단독효과 및 교호작용은 1% 수준에서 유의성이 인정되었다. 원통 회전속도가 커지면trough각도 역시 그에 따라 적절히 증가시켜야만 선별효율의 저하가 방지되는 것으로 나타났다. 2. 최고 선별효율 값은 홈의 모양과 크기, 그리고 공급량에 관계없이 낮은 회전속도 (17rpm)와 중간 trough각도 (37.5$^{\circ}$또는 60$^{\circ}$)가 조합된 처리에서 나타났으며, 60~70% 범위의 높은 값을 보였다. 선별효율에 관한 원통 회전속도와 trough각도의 최적 조합은 17rpm, 37.5$^{\circ}$라고 판단된다. 3. 말발굽형 홈과 반구형 홈 간 선별효율의 차이는 없었다. 따라서, 실제 상업용 규모의 원통형 홈 쇄미선별기 개발에 있어서는 제작이 쉽고 유지.보수가 간편한 반구형 홈을 채택하는 것이 바람직할 것으로 생각된다. 길이 2.5mm이하의 미립인 쇄미의 선별에 사용할 홈의 크기는 2.5mm 보다는 약간 큰 3.0mm 정도가 되어야만 할 것으로 판단된다. 4. 공급량에 따른 선별효율의 차이는 1% 수준에서 유의성이 인정되었으며, 공급량이 작았을 때 전반적으로 선별효율이 높았다.타리 시프터를 채택, 사용하고 있었으며, 로타리시프터 사용상의 문제는 회전몸체를 지지하는 rod spring의 파손 등 구조와 관련된 것이었다. 로타리 시프터에 의한 쇄립의 선별과 제거정도는 만족할 만한 수준은 아니었다. 4. 국내 유통백미 완전립의 길이, 폭, 두께는 각각 5.02mm, 2.93mm, 2.03mm이었으며, 산물밀도와 천립중은 각각 745.3kg/m3 및 20.46g이었다. 5. RPC 백미제품의 품질경쟁력 향상을 유도하고자 현행 쇄미의 정의와 기준을 보다 강화하여 다음과 같은 쇄미 기준과 계급을 설정, 제시하였다. "완전립" - 길이가 3.75mm이상인 미립 "준완전립" - 길이가 2.5∼3.75mm인 미립 "쇄미" - 길이가 1.75∼2.5 mm인 미립 "이물" - 길이가 1.75mm이하인 미립.볼 때 상토 종자혼합비 6 : 1, 성형롤 회전속도 약 7 rpm으로 판단되며, 이 때 제조능력은 시간당 약 65 Kg(펠렛종자 약 39,000 개), 성형률 약 87 %, 종자손실률은 약 30 %, 펠렛종자 내 평균 종자수는 약 5.5 개, 완전 벼 종자 3개 이상 포함 펠렛종자 비율은 약 100 %가 될 것으로 보인다. 세포의 Androgen 생성을 촉진시키는 역할이 있는 것으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간

  • PDF

Three Dimensional Responses of Middle Rise Steel Building under Blast Loads (폭발하중을 받는 강구조 중층 건물의 응답 및 해석)

  • Hwang, Young-Seo;Lee, Wan-Soo
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.24 no.6
    • /
    • pp.629-636
    • /
    • 2011
  • It has been suggested that buildings designed for strong ground motions will also have improved resistance to air blast loads. As an initial attempt to quantify this behavior, the responses of a ten story steel building, designed for the 1994 building code, with lateral resistance provided by perimeter moment frames, is considered. An analytical model of the building is developed and the magnitude and distribution of blast loads on the structure are estimated using available computer software that is based on empirical methods. To obtain the relationship between pressure, time duration, and standoff distance, these programs are used to obtain an accurate model of the air blast loading. A hemispherical surface burst for various explosive weights and standoff distances is considered for generating the air blast loading and determining the structural response. Linear and nonlinear analyses are conducted for these loadings. Air blast demands on the structure are compared to current seismic guidelines. These studies present the displacement responses, story drifts, demand/capacity ratio and inelastic demands for this structure.

An Automatic Measuring System of the Electric Fields Produced by Lightning Strokes (뇌방전에 의하여 발생하는 전장의 자동측정시스템)

  • Lee, Bok-Hee;Ahn, Chang-Hwan;Kil, Gyung-Suk
    • Journal of Sensor Science and Technology
    • /
    • v.5 no.2
    • /
    • pp.47-54
    • /
    • 1996
  • This paper deals with the electric field sensor and automatic measuring system of the time-varying space electric field produced by lightning discharges. The theoretical principle and the design rule of the measuring devices are investigated, and the semisphere-type electric field sensor and the signal process system are fabricated. From the calibration experiments, the frequency bandwidth of the measuring system ranges from 200 [Hz] to 1.56 [MHz] and the sensitivity is 0.96 [m V/V/m] as the amplification gain is 10. In addition, the electric field waveforms produced by lightning discharges are observed by the proposed electric field measuring system from June to August in 1995. The data is sampled with the time interval of 200 [ns] and is automatically recorded by transient signal analyzer(Necolet Pro 30), the resolution of which is 12 bit. And it is registered at personal computer. The electric field waveforms produced by intracloud discharge tend to be bipolar, with two or three narrow and fast rising pulses superimposed on the initial half-cycle.

  • PDF

Occurrence of Rhizopus Soft Rot on Rubus crataegifolius Caused by Rhizopus stolonifer in Korea (Rhizopus stolonifer에 의한 산딸기 무름병 발생)

  • Kwon, Jin-Hyeuk;Chi, Tran Thi Phuong
    • Research in Plant Disease
    • /
    • v.14 no.2
    • /
    • pp.127-130
    • /
    • 2008
  • Rhizopus soft rot caused by Rhizopus stolonifer on June, 2008 occurred on Rubus crataegifolius Bunge in the box at Jinju City Wholesale Market of Agricultural Products at Gyeongnam province in Korea. The infected fruits were rapidly water-soaked, softened, black and eventually rotted. The symptoms occurred after infecting wounds at harvest time. The colony were white to light brown, formed much sporangiospores. The optimum temperature of the fungus on potato dextrose agar was $30^{\circ}C$. Sporangiophores were $12{\sim}25{\mu}m$ in width. Sporangia were globose or hemispheric, white at first and gradually to black, and $82{\sim}195{\mu}m$ in size. Columella were hemispheric, and $70{\sim}92{\mu}m$ in size. Sporangiospores were irregular round or oval, brownishblack and $9{\sim}21{\times}7{\sim}8{\mu}m$ in size. On the basis of symptom, mycological characteristics and pathogenicity of the fungus, the causal fungus was identified as Rhizopus stolonifer. This is the first report of Rhizopus soft rot by R. stolonifer on R. crataegifolius in Korea.

Occurrence of Rhizopus Soft Rot on Musa sapientum Caused by Rhizopus stolonifer in Korea (Rhizopus stolonifer에 의한 바나나 무름병 발생)

  • Kwon, Jin-Hyeuk
    • The Korean Journal of Mycology
    • /
    • v.35 no.1
    • /
    • pp.54-57
    • /
    • 2007
  • Rhizopus soft rot caused by Rhizopus stolonifer occurred on banana (Musa sapientum) in the box at Jinju City Wholesale Market of Agricultural Products at Gyeongnam province in Korea. The infected fruits were rapidly water-soaked, softened, blackened and eventually rotted. They were infected from wounds at harvest time. The colony of the isolate from the infected fruit was white to light brown and formed many sporangiospores. The optimum growth temperature of the fungus on potato dextrose agar was $30^{\circ}C$. Sporangiophores were $12{\sim}26\;{\mu}m$ in width. Sporangia were globose or hemispheric, white at first and changed gradually to black, and $83{\sim}195\;{\mu}m$ in size. Columella were hemispheric, and $72{\sim}125\;{\mu}m$ in size. Sporangiospores were irregular round or oval, brownish-black and $9{\sim}20{\times}7{\sim}8\;{\mu}m$ in size. On the basis of symptom, mycological characteristics and pathogenicity to banana, the causal fungus was identified as Rhizopus stolonifer. This is the first report of Rhizopus soft rot by R. stolonifer on banana in Korea.

Occurrence of Rhizopus Soft Rot on Melon (Cucumis melo L.) Caused by Rhizopus stolonifer in Korea (Rhizopus stolonifer에 의한 멜론무름병 발생)

  • Kwon, Jin-Hyeuk
    • The Korean Journal of Mycology
    • /
    • v.36 no.2
    • /
    • pp.199-202
    • /
    • 2008
  • Rhizopus soft rot caused by Rhizopus stolonifer occurred on melon (Cucumis melo L.) in the box at Jinju City Wholesale Market of Agricultural Products at Gyeongnam province in Korea. The infected fruits were rapidly water-soaked, softened, black and eventually rotted. The symptoms were infected from wounds at harvest time. The colony were white to light brown, formed much sporangiospores. The optimum temperature of the fungus was $30^{\circ}C$. Sporangia were globose or hemispheric, white at first and gradually to black, and $80{\sim}195\;{\mu}m$ in size. Sporangiophores were $12{\sim}24\;{\mu}m$ in width. Columella were hemispheric, and $70{\sim}90\;{\mu}m$ in size. Sporangiospores were irregular round or oval, brownish-black and $9{\sim}20\;{\times}\;6{\sim}8\;{\mu}m$ in size. On the basis of symptom, mycological characteristics and pathogenicity to melon, the causal fungus was identified as Rhizopus stolonifer (Ehrenb.) Vuill.. This is the first report of Rhizopus soft rot by R. stolonifer on melon in Korea.

Rhizopus Soft Rot on Momordica charantia Caused by. Rhizopus stolenifer in Korea (Rhizopus stolonifer에 의한 여주 무름병)

  • Kwon Jin-Hyeuk;Jee Hyeong-Jin
    • Research in Plant Disease
    • /
    • v.11 no.2
    • /
    • pp.204-207
    • /
    • 2005
  • A Rhizopus soft rot caused by Rhizopus stolonifer occurred on Momordica charantia at Daesan-myon, Chang-won city, Gyeongnam province from 2003 to 2005. The disease usually started from wound on fruit with water-soaking lesions. The lesion rapidly expanded and softened. The fungal mycelia grew vigorously and sporangia, sporangiophores, and stolons were formed on surface of the fruit. Spoyangiophores were $15\~30{\mu}m$ in width. Sporangia were globose or hemispheric and $90\~180{\mu}m$ in size. The color of sporangia was white and cottony at first and turned to brownish black with many spores at maturity. Columella were hemispheric and $80\~150{\mu}m$ in size. Sporangiospores were irregular round or oval, brownish-black streaked and $7\~18{\times}6\~12{\mu}m$ in size. The optimum temperature for mycelial growth of the fungus on PDA was $25^{\circ}C$. On the basis of mycological characteristics and pathogenicity to host plants, the causal fungus was identified as Rhizopus stolonifer (Ehrenberg ex. Fr,) Lind. This is the first report of Rhizopus soft rot on M. charantia caused by R. stolonifer in Korea.

Output Characteristics of a LGP for TFT-LCD with Pyramid Shaped Pattern (피라미드 패턴으로 제작된 TFT-LCD용 도광판의 출력 특성)

  • Kim, Young-Chul;Ahn, Seong-Joon;Ahn, Seung-Joon;Oh, Tae-Sik;Kim, Ho-Seob;Kim, Dae-Wook
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.11
    • /
    • pp.3080-3086
    • /
    • 2009
  • We have analyzed the output characteristics of a LGP with pyramid shaped pattern by using a 3-D simulation tool. The influences on the LGP output of various parameters such as the pattern shape, pattern occupation ratio, pattern size, and etching angle were investigated. Comparing the pyramid shaped pattern with hemispherical patterns, little difference was observed. And, it was proved that the pattern occupation ratio and etching angle have relatively large effects on LGP output characteristics, while the pattern size has no effect. Therefore, we can improve the LGP characteristics by optimizing pattern structure and distribution.

Construction and Operation of a 37-channel Hemispherical Magnetoencephalogram System (37채널 반구형 뇌자도 측정장치 제작 및 동작)

  • 이용호;김진목;권혁찬;김기웅;박용기;강찬석;이순걸
    • Journal of Biomedical Engineering Research
    • /
    • v.24 no.3
    • /
    • pp.159-165
    • /
    • 2003
  • We developed a 37-channel magnetoencephalogram (MEG) measurement system based on low-noise superconducting quantum interference device (SQUID) magnetometets, and operated the system to measure MEG signals. By using double relaxation oscillation SQUIDs with high flux-4o-voltage transfers, the SQUID outputs could be measured directly by room temperature preamplifiers and compact readout circuits were used for SQUID operation. The average field noise level of the magnetometers is about 3 fT/√Hz in the white region, low enough for MEG measurements when operated inside a magnetically shielded room. The 37 magnetometers were distributed on a hemispherical surface haying a radius of 125 mm. In addition to the 37 sensing channels. 11 reference channels were installed to pickup external noise and to form software gradiometers. A low-noise liquid helium dewar was fabricated with a liquid capacity of 30 L and boil-off rate of 4 L/d. The signal processing software consists of digital filtering, software gradiometer, isofield mapping and source localization. By using the developed system, we measured auditory-evoked fields and localized the current dipoles, demonstrating the effectiveness of the system.