• Proceedings of the Korea Forestry Energy Research Society Conference
• /
• 2007.05a
• /
• pp.17-25
• /
• 2007

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.704-710
• /
• 2014

Biomass is considered an alternative energy which can solve an greenhouse gas problem like $CO_2$ which is a major contributor to global warming. The biomass can be converted to various energy sources through thermochemical conversion. In this study, a continuous gasifier was engineered for a wood biomass gasification. The biomass was used a waste wood. The experiments of $CO_2$ gasification were achieved as the gasification temperature, moisture content and input $CO_2$ concentration. The results showed that the yield of producer gas increased with an increasing the gasification temperature. The amount of the light tar increased due to the decomposition of gravimetric tar by the thermal cracking, and the char was confirmed pore development through the SEM analysis. The CO concentration was increased with an increased input $CO_2$ concentration from Boudouard reaction. Through the parametric screening studies, the hydrogen and carbon monoxide concentration were 32.91% and 48.33% at the optimal conditions of this test rig.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.439-449
• /
• 2014

RPS (Renewable Portfolio Standard) has increased wood pellet demand dramatically in recent years in Korea where self-supply rate of wood pellet is not more than 10%. However global production capacity of wood pellet is prospected to be unable to meet the global demand after 2020. Therefore it is urgently needed to develop new sustainable biomass energy resources which can replace wood pellet at lower cost. As a result of this study EFB (empty fruit bunch) and MF (mesocarp fiber), the representative solid palm biomass, are estimated to be generated at the rate of 20 and 28 million tons per year (based on 10% moisture content) in Malaysia and Indonesia, respectively in 2012. Total annual generation rate of EFB and MF is estimated as 48 million tons per year only in Malaysia and Indonesia in 2012. With calorific value of over 90% of wood pellet EFB is expected to be a excellent biomass energy resource which can replace wood pellet. EFB can be utilized as fuel for power generation or industrial purpose. However EFB may not be a proper fuel for domestic and greenhouse heating because of its high ash content.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.214-225
• /
• 2016

Gasification is one of the important contribution to resource recycling by conversion of biomass to a variety of energy sources such as alcohol, SNG etc., and to global warming prevention by reduction of green house gases such as $CO_2$. The aim of this study is to draw the optimal operation condition of dual fluidized-bed gasifier with biomass fuel, to verify SNG production efficiency and to establish the basis for the domestic commercialization of dual fluidized bed gasification. As a result, dual fluidized-bed gasifier has the optimal conditions at $826^{\circ}C$ with steam input 1,334 g/hr, air input 5.56 L/min. The carbon conversion is 81% and SNG production efficiency was $CH_4$ 92%.

• Clean Technology
• /
• v.18 no.3
• /
• pp.265-271
• /
• 2012

The use of renewable energies has been required to diminish the dependency on fossil fuels. As one of clean energy sources biomass has been extensively studied because various biomass resources necessitated rapid characterization of their chemical and physical properties in an on-line or real-time basis. For such an analysis near-infrared (NIR) spectroscopy has been successfully applied because of its non-invasive and informative characteristics. In this work, the applicability of nonlinear chemometric techniques based on biomass near infrared (NIR) data is evaluated for the rapid prediction of ash/char contents in different types of biomass. The prediction results of various prediction models and the effect of using preprocessing methods for NIR data are compared using six types of biomass NIR data. The results showed that nonlinear prediction models yielded better prediction performance than linear ones. It also turned out that by adopting the use of proper preprocessing methods the performance of prediction of biomass properties improved.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.497-506
• /
• 2013

The optimal condition for the torrefaction of eucalyptus (Eucalyptus globulus) was investigated by response surface methodology. The carbon content in the torrefied biomass increased with the severity factor (SF), while hydrogen and oxygen contents decreased. The calorific value of torrefied biomass ranged from 20.23 to 21.29 MJ/kg, depending on the torrefaction conditions. This implied that the energy contained in the torrefied biomass increased by 1.6 to 6.9%, when compared with that of the untreated biomass. The weight loss of biomass increased as the SF increased. The Code level of reaction temperature had the highest impact on the energy yield of torrefied biomass, while the effect of Code level of reaction time was considerably low. The highest energy yield was obtained at low SF.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.525-528
• /
• 2006

아임계 및 초임계수에 의한 목질바이오매스의 당화특성을 분석하기 위하여 분해공정 동안 압력을 23MPa(물의 임계압력)로 고정하고 물의 아임계 온도$(325^{\circ}C,\;350^{\circ}C)$와 초임계 온도$(380^{\circ}C,\;400^{\circ}C,\;425^{\circ}C)$에서 현사시나무 목분을 각각 60초 동안 처리하였다. 생성된 현사시나무의 분해산물에는 액상과 고형분의 분해산물이 섞여 있었다. 각 처리조건에 따른 목질바이오매스의 분해율은 온도가 상승함에 따라 증가하였으며 초임계 온도인 $425^{\circ}C$에서 최고 83.1%의 분해율을 나타냈다. 아임계 및 초임계수에 의해서 생성된 단당류는 고성능 음이온 교환 크로바토그래프(HPAEC)를 이용하여 분석하였다. 목질바이오매스의 초임계수 분해과정에서 처리 온도가 높아지면서 단당류 수율은 증가하는 경향을 보였으며, $425^{\circ}C$에서 가장 높은 7.3%의 단당류 수율을 나타내었다. 아임계 온도 범위에서는 현사시나무의 섬유소 성분 중에서 자일란이 우선적으로 분해되어 자일로스의 생성비율이 비교적 높았으며, 처리온도가 높아지면서 셀롤로오스의 분해에 의한 글루코오스 생성율이 급격히 상승하였다. 이렇게 생성된 단당류 성분들은 고온의 반응조건하에서 열분해 반응에 의해서 더욱 분해되어 퓨란계 화합물로 변형되었다.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.833-844
• /
• 2008

Bio-energy offers the opportunity to lessen fossil fuel consumption. Energy derived from solar, wind, hydroelectric, geothermal, and biomass sources are considered renewable. Because most forms of bio-energy are derive deither directly or indirectly from the sun, there is an abundant supply of renewable energy available, unlike fossil fuels. The use of bio-energy also provides environmental, economic and political benefits. Bio-energy can be produced from a marine source such as biomass provides a $CO_2$ neutral, non-polluting form of energy. In this paper, the potential of marine biomass is increasingly discussed, given the size of the resource in that more than three quarters of the surface of planet earth is covered by water.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.107-119
• /
• 2013

바이오매스 가스화는 세계적인 증가 추세에 있는 에너지 수요를 충족할 수 있는 기술 중의 하나이다. 바이오매스 가스화를 통해서 농업 폐기물 등 다양한 바이오매스 자원을 에너지로 전환할 수 있고 $CO_2$ 배출량 또한 줄일 수 있다. 본 연구에서는 COMSOL$^{(R)}$ 3.4 소프트웨어를 이용하여 바이오매스 원료와 운전 조건에 따른 가스화 효율 및 합성가스 조성의 변화를 분석하였다. 원료와 구동조건을 최적화하기 위해 가스화 모델을 세우고 원료와 구동조건을 달리하여 합성가스의 성분을 분석 및 예측하였다. 이 모델은 물리적인 실험을 통해 알고 있는 조건을 통해서 합성가스 성분을 시간에 따라 예측할 수 있다. 모델을 이용하여 함수비 5~30 %, 공기중 산소함량 5~50 %, 공기공급 유량 5~45 L/min, 온도 973~1273 K의 조건에서 합성가스의 성분을 예측한 결과 실제 실험 결과와 일치하는 것을 알 수 있다. 모델링 결과 양질의 합성가스를 생산하려면 원료의 회분함량이 적어야 하고 수소 함량이 높은 합성가스를 생산하려면 반응 온도가 높게 유지되고 원료의 함수비가 높아야 한다. 가스화장치의 온도를 높이면 합성가스의 성분 중 CO의 함량이 많아지고, CO의 함량이 많아지면 가스의 발열량이 높아지는 것을 알 수 있다. 또한 CO의 농도가 높고 발열량이 높은 합성가스를 생산하기 위해서는 ER값은 작아야 한다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.271-271
• /
• 2018