• Pediatric Infection and Vaccine
• /
• v.17 no.2
• /
• pp.122-129
• /
• 2010

Purpose : Enteroviral infection is a common viral illness in children. We undertook this study in attempt to comprehend the epidemiologic and clinical features of enteroviral infections, particularly EV71 in children. Methods : We enrolled 63 children with enteroviral infection at Severance Children's Hospital in Seoul between May and August 2009. Reverse transcriptase-polymerase chain reaction (RT-PCR) was performed from stool or cerebrospinal fluid samples, which were then tested for enteroviral infection. Viral isolation and serotype identification also were performed by RT-PCR. Results : A total of 63 patients with clinical diagnosis of enteroviral infections were enrolled; of those, 38 (60%) were positive for enterovirus. The mean age of the patients was 2 years and 7 months and the sex ratio of male to female was 0.9 :1. Their clincal manifestations included aseptic meningitis (21 cases, 55%), HFMD (16 cases, 42%), herpangina (5 cases, 13%), neonatal fever (2 cases, 5%), encephalitis (1 case, 3%), and myocarditis (1 case, 3%). Serotypes of isolated enteroviruses were EV71 (8 cases, 21%), coxsackievirus B1 (8 cases, 21%), coxsackievirus A16 (2 cases, 6%), coxsakievirus A2 (1 case, 3%), coxsakievirus A5 (1 case, 3%), and echovirus 9 (1 case, 3%). Clinical symptoms of EV71 infection included HFMD (5 cases, 63%), aseptic meningitis (3 cases, 38%), encephalitis (1 case, 13%), and myocarditis (1 case, 13%). A positive rate of C-reactive protein in EV71 was higher than those in other enterviral infections. However, there was no statistically significant difference in other laboratory findings. Conclusion : We reported on identified enteroviruses, including EV71, during a period of 3 months in the summer of 2009. In this study, EV71 infection frequently occurred in male and clinical manifestation caused by EV71 was a more severe disease than that due to other enterviral infections. There is a need for continuous surveillance of enteroviral infection and its clinical manifestations for diagnosis and treatment of enteroviral infection.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.3
• /
• pp.105-118
• /
• 2005

This study examined the improvements of existing food waste statistics system using a sample survey, which estimated the total food waste generation in 4 areas(High, Middle, Middle and Low, and Low population density), and a survey, which was aimed at forming a basis for modeling 112 local governments, were conducted. Currently, the methods for collecting the statistical data are summarized as five types. In high population density areas, the type based on examining the recycling facilities was found to be a more general way of estimating population centers higher than low population density areas. It was found that numerous low population density areas estimated their food waste production according to its generation per capita. It was also found that the findings of sample survey were 10%~40% higher than the existing statistical data and Non-separated collected food waste appears to be the main factor.

• Resources Recycling
• /
• v.3 no.3
• /
• pp.32-49
• /
• 1994

Hydration process is one of the basic carbonation system. Limestone sludge produced in Pohang Iron & Steel Co., Ltd. We tested for identify of hydration characteristics. The result obtained in this study can be summarized as follows; 1. The classify of limestone sludge is type of ground calcium carbonate(-3mm+325mesh)and the major mineral of calcite, and further more high grade(CaO 51%), fine powder(15~22$\mu\textrm{m}$). 2. Limestone sludge mixed two process sludge, first one is washing process sludge and the other one is wet collect kiln dust. The composition rate is about 8:2. Wet collect kiln dust is major mineral of calcite, too. But the sludge is assumed to one by quick lime, slaked lime and unreacted natural limestone. So, the ideal process is dividing of the washing process sludge and wet collect kiln dust. 3. We manufactured of slaked lime from limestone sludge. To investigate the effect of hydration reactor, the experiments was done with various reactor type as magnetic stirrer, shaking incubator and ultrasonic vibration reactor, respectively. Generally, ultrasonic vibration reactor is excellent hydration for limestone sludge and produced very fine slaked lime powder with ideal distribution. 4. The optimum condition is 10% pulp density, when the manufacture of fine slaked lime powder by ultrasonic vibration reactor. And hydration times to compare the results of the study with ultrasonic vibration reactor of generalized most short time(5~10 min). 5. Finally, the dispersive characteristics of slaked lime powder measured 1~5 $\mu\textrm{m}$ from limestone sludge were compared with those of natural limestone ones(10~20$\mu\textrm{m}$), in order to check applicability of slaked lime with hydration process from limestone sludge.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.253-259
• /
• 2021

Plastic wastes generated from household waste are separated by mixed discharge with foreign substances, and recycling is relatively low. In this study, the effect of the ratio and content of mixed plastic waste coarse aggregate(MPWCA)s and mixed plastic waste fine aggregate(MPWFA)s filled with blast furnace slag fine powder on the slump and compressive strength of concrete was evaluated experimentally. The MPWCAs were found to have a similar fineness modulus, but have a single particle size distribution with a smaller particle size compared to coarse aggregates. However, the MPWFAs were found to have a single particle size distribution with a larger fineness modulus and particle size compared to fine aggregates. Meanwhile, the effect of improving the density and filling pores by the blast furnace slag fine power was found to be greater in the MPWFA compared to the MPWCA. As the amount of the mixed plastic waste aggregate(MPWA)s increased, the slump and compressive strength of concrete decreased. In particular, the lower the slump and compressive strength of concrete was found to decrease the greater the amount of MPWFA than MPWCA when the amount of MPWA was the same. This is because of the entrapped air and voids formed under the angular- and ROD-shaped aggregates among the MPWFAs. On the other hand, the addition of the admixture and the increase in the unit amount of cement were found to be effective in improving the compressive strength of the concrete with MPWAs.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.2
• /
• pp.91-107
• /
• 1992

A numerical formulation is developed to solve the linear three-dimensional hydrodynamic equations which describes wind induced flows in a homogeneous shelf sea. The hydmdynamic equations are at the outset separated into two systems. namely, an equation containing the gradient of sea surface elevation and the mean flow (external mode) and an equation describing the deviation from the mean flow (internal mode). The Galerkin method is then applied to the internal mode equation. The eigenvalues are determined from the eigenvalue problem involving the vertical eddy viscosity subject to a homogeneous boundary condition at the surface and a sheared boundary condition at the sea bed. The model is tested in a one-dimensional channel with uniform depth under a steady, uniform wind. The analytical velocity profile by Cooper and Pearce (1977) using a constant vertical eddy viscosity in channels of infinite and finite length is chosen as a benchmark solution. The model is also tested in a homogeneous, rectangular basin with constant depth under a steady, uniform wind field (the Heaps' Basin of the North Sea scale).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.308-320
• /
• 2006

An analytic solution to the mild-slope equation is derived for waves propagating over an axi-symmetric pit. The water depth inside the pit varies in proportion to a power of radial distance from the pit center. The governing equation is transformed into ordinary differential equations by using separation of variables, and the coefficients of the equations are transformed into explicit forms by using Hunt's (1979) approximate solution. Finally, by using the Frobenius series, the analytic solution is derived. Due to the feature of Hunt's equation, the present analytic solution is accurate in shallow and deep waters, while it is less accurate in intermediate depth water. The validity of the analytic solution is demonstrated by comparison with numerical solutions. The analytic solution is also used to examine the effects of pit geometry and relative depth on wave transformation.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.37-43
• /
• 2013

Unlike the conventional slurry type wire sawing, the diamond wire sawing method adopts diamond plated wire as sawing media instead of slurry consisted of both silicon carbide and oil. Wafering with diamond plated wire leaves solid element of the sludge mostly made up of silicon, and it is not difficult to recover 95% or more of silicon by a simple separation process of oil from the sludge. In this study, silicon was recovered from the sludge by drying process and organic and metal impurities were removed by sintering process. As result 3N grade silica was obtained successfully by thermal processing utilized the fact that the recovered silicon readily combines with oxygen due to fine particle size.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.311-320
• /
• 2006

Digital filters designed using wavelet theory are applied to bathymetry data acquired from KR5 area of Korea Deepsea Mining Area. The filters used in this study are the linear B-spline wavelet filter and derivative of a Cubic B-spline filter. With proper tuning of the digital filters, we can identify the location and orientation of the abyssal hill and abyssal trough in bathymetry. These features obtained from the digital filters are well correlated with bathymetric image. This quantitative information, which can be used to understand the underlying geophysical processes, can be further processed to obtain the spacing, orientation and distribution of the abyssal hill. This wavelet analysis of bathymetry provides good data to select the mining site.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.585-590
• /
• 2000

A hemolysin producing strain was isolated from Kum rivet estuary located in west part of Korea. In the process of identification the isolated strain was similar to V. mimicus but did not show characteristics of known Vibrio species; therefore, the strain was designated as Vibrio sp. D9 ( V. kumkang) tentatively and further identification study was carried out by comparing its bacteriological characteristics, Morphologically Vibrio sp. D9 was a typical straight roe with a polar flagellium. Among known Vibrio species no identical strains were found when using automatic bacteria identification system ($MicioLog^(TM)$system, release 4.0, Biolog Inc., USA) which evaluated the ability of metabolizing 95 kinds of carbon and nitrogen sources. Vibrio sp. D9 showed 18 and 13 different responses as compared to V. mimicus and V. cholerae, respectively. Clear hemolysis zones were observed with the strain against human and sheep blood agar plate, Hemolytic toxicity was confirmed by strong vascular permeability and fatal toxicity against mouse was also observed. Thus the strain was a pathogenic vibrio. Growth conditions for Vibrio sp. D9 were salinity of $0{\~}5.0{\%}$, pH of $6.4{\~}9.8$, temperature of $15{\~}41^{\circ}C$, respectively.

• The Korean Journal of Zoology
• /
• v.33 no.1
• /
• pp.78-93
• /
• 1990

The ultrastructure of epididymal epithelium of 10, 20, 35 and 80 day-old mouse was observed to study the differentiation and function of the epithelial cells in connection with the absorption and secretion during sexual matruation. The differentiation of epididymis was divided into three phases of, 1) undiflerentiated phase until the day 20 after birth, 2) growing and differentiating phase between the day 20 and 35, and 3) maturating phase up to the adult. Each phase was closely related with the lumination of seminiferous tubule and the influx of spermatozoa within testicular fluid from testis. In adult, the ultrastructural features appeared an absorptive function in the principal cells of proximal caput epididymis, and a strong activity of protein synthesis and secretion in distal caput, corpus and cauda epididymis. Clear cells were predominantly located in corpus and cauda epidiymis, and plenty of absorption vesicles including membranous particles assumed to be the cellular residues from spermatozoa were observed at apical region. Therefore, the distribution of various cell types of epithelium and the ultrastructure even in the same type of epithelial cell, were different according to the epididymal regions.