• Journal of KIISE:Information Networking
• /
• v.27 no.4
• /
• pp.389-395
• /
• 2000

본 논문은 파장분할 다중화통신망에서 처리 성능을 향상시키기 위하여 분할된 제어 채널을 가진 프로토콜의 성능을 이론적으로 해석하였다. 시스템의 처리율과 지연특성은 제어 채널 충돌과 목적지 충돌에 많은 영향을 받는다. 이 프로토콜은 제어 채널을 경쟁 미니슬롯 영역과 비경쟁 미니슬롯 영역으로 분할하여 현재 타임 슬롯에서 예약되지 못한 패킷은 다음타임 슬롯의 비경쟁 미니슬롯 영역에 우선적으로 등록하여 제어 채너 결쟁과 목적지 충돌을 줄인다. 이영향으로 시스템의 처리율과 시스템 지연 특성이 개선된다. 해석에서 비경쟁 미니슬롯 영역의 최대 미니슬롯 수는 망의 데이터 채널 수와 동일한 범위 내에서 가변적으로 설정할 때 가장 좋은 특성을 얻을 수 있음을 보였다. 그리고 이 프로토콜이 트래픽의 종류와 관계없이 시스템 지연 특성과 처리율을 향상시키는데 유용함을 확인하였다.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.205-215
• /
• 2002

In this paper the Dynamic Minislot Reservation Protocol(DMRP) in which the control channel is divided into contention-less and contention minislots in order to reduce re-transmission probability in multicasting is proposed. In the network, earth node has two pairs of transceivers. A transceiver consisting of a fixed transmitter and a fixed receiver is used to control packet registration and the other transceiver is used to transmit data. Two types f transceivers for data transmission are considered : one is FT-TR(Fixed Transmitter-Tunable Receiver) and the other is TT-TR(Tunable Transmitter-Tunable Receiver). In the analysis, FT-TR and TT-TR single-hop passive star networks are compared. As results, we conclude that the DMRP protocol with dynamically divided control channel has improved the system performance such as throughput and system delay regardless of traffic type or network structure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.6
• /
• pp.701-706
• /
• 2005

Pipes, tubes. and tubular sections with external transverse high fins have been used extensively for heating cooling, and degumidifying air and other gases. This work was performed to investigate an air side heat transfer charactieristics of minichannel with tension wound transverse fin. This estimate was confirmed conversion heat capacity the air side surface area enlargement and heat transfer charactieristics performed available inlet tube side hot water mass flux or outlet tube side air frontal air velocity. The most suitable tension wound transverse finned minichannel was measured extremely low in air side pressure drop and fin effectiveness $3.3\~4.4$. The pressure drop $0.9\~2.8Pa$ was ranged frontal air velocity $0.5\~1.2m/s$. It is also appeared that heat transfer in air side could be better conversion heat area which has been increased $330\%$ of heat capacity compared with the bare tube.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.842-849
• /
• 2000

In this paper, We analyzed the protocol to improve the performance of the multicast traffic processing in WDM networks. In the protocol, control channels are devided into contention-less minislots and contention minislots. And the packets which fail to have successful reservation in the present time slot have priority to have successful reservation in the contention-less minislots of the next time slot. Therefore, control channel contentions and destination conflicts can be reduced with the use of contention-less minislots. For the multicast traffic processing, the theoretical analysis and computer simulation are important to estimate the network performance and to calculate the optimized number of contention-less minislots. In this paper, the state transition probability of the number of contention-less minislots and arrival packets are calculated using 4-dimension matrix. The maximum number of contention-less minislots is equal to the number of channels for maximum performance improvement of the system. It is theoretical analysis and prove to computer simulation the performance of the protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.191-199
• /
• 2003

In this paper, a channel access control algorithm and a dynamic slot allocation algorithm are proposed for rt_VBR services and ABR services in the wireless ATM networks. In the proposed algorithm, rt_VBR terminals that require real-time services transmit a reservation request packet by a RAS minislot. An rt_VBR terminal, which transmitted the reservation request packet, transmits the dynamic parameters by DPS minislot without contention. On the other hand, ABR terminals that have a non-real-time traffic burst transfer a reservation request packet with contention basis. Based on the received dynamic parameters, the base station scheduler allocates uplink data slots as well as DPS minislot into rt_VBR terminals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.64-74
• /
• 2001

In this paper, a dynamic minislot reservation protocol(DMRP) is proposed and analyzed to improve the performance of the multicast traffic processing in wavelength division multiplexing(WDM) networks. For the proposed protocol analysis, the WDM network architecture with a passive star coupler is used. One pair of transceiver is used for a control channel and the ocher pair of transceiver with one fixed transmitter and one tunable receiver are used for data transmission. In this protocol. the packets which fail to have successful transmission in the present time slot due to data channel and destination collisions, have priority to have successful reservation in the contention-less minislots of the next time slot. Therefore, protocols have improved the throughput and the system delay performance caused by the reduced probabilities of control channel contentions and destination collisions probability. Today, the efficient protocol that can handle the various types of data traffic is needed. As results, the DMRP is useful to improve the performance of throughput and system delay characteristics regardless of the kinds of traffic.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.357-362
• /
• 2006

This research focused on the multi-pass heat exchanger using the minichannel possessing the spring fin. An air-water was used as working fluid. The characteristics of liquid single phase heat transfer were verified. The compact heat exchanger (heat transfer area density : ${\beta}=2,146 m^2/m^3$), based on the shape of header(Top combining header), 63 minichannels ($D_i$ : 1.4 mm, L : 0.25 m) and the air side adopting the copper wire spring fin, was fabricated. The heat transfer area density of the air side was improved up to 161% when compared with the conventional fin-tube heat exchanger that adopts the heat transfer tube with the inner diameter of 5 mm. With regard to heat transfer performance, heat transfer rate per unit volume increased up to 142% when compared with the fin-tube heat exchanger adopting the heat transfer tube with the inner diameter of 5 mm.

• Journal of the Korean Society of Visualization
• /
• v.14 no.3
• /
• pp.38-45
• /
• 2016

Separation of particles based on different sizes, detection of pathogenic bacteria and isolation of leukocytes from whole blood are typical applications of spiral or helical microchannels. The present study focuses on developing a CD4+ T-cell counting device for monitoring HIV/AIDS patients with the aid of a helical minichannel used for a sample cartridge. For the experiment, $10{\mu}m$ sized microbeads were used for visualization with a fluorescence imaging system. Alignment of microbeads was investigated in a stationary and spinning sample cartridge filled with glycerol-water mixtures of different densities. The helical minichannel was spun using a DC motor controlled by an Arduino board with a Bluetooth shield. It was found that when the sample cartridge was made stationary, no bead alignment was achieved for a medium with density (0% and 20% glycerol) lower than that of the beads, but when it was spun at 2000-3000 rpm for 1-4 min, an alignment was obtained at the top of the channel facilitating optical detection and enumeration of those microbeads. Since an alignment of microbeads was achieved for a medium with density as that of blood plasma, the same approach can be applied for aligning and counting CD4+ T-lymphocytes in whole blood samples collected from patients.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.245-253
• /
• 2010

The present study shows some results of developing evaporative heat exchangers with mini-channels. Heat exchangers with three different water paths were manufactured and tested to compare performances of cooling and pressure drop. Among the three types of heat exchangers, Type 2 with full-etching was proved to be the best in the cooling performances for considered operating conditions, and thus it is recommended to adopt Type 2 for its simplicity of production and outstanding performance. However, Type 1 was shown to be better when it is operated at a high air inlet temperature condition. The developed evaporative heat exchanger will be installed in Environmental Control Systems(ECSs) for aerial vehicles, and it can be used effectively in case an ECS is not only limited in its weight and volume but also required to absorb heats without supplying water (or a coolant) for a certain period of time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.899-906
• /
• 2003

In this paper, a channel access control algorithm and a slot allocation algorithm are proposed as MAC protocol for multimedia services in TDMA/TDD-based wireless ATM networks. In the proposed protocol, VBR terminals that require real-time services transmit a reservation request through a random access minislot. VBR terminals, which are successfully transmitted the reservation request, transmits the dynamic parameters through a dynamic parameter minislot without contention. On the other hand, ABR terminals transmit a reservation request with contention basis whenever a non-real-time traffic burst is generated. Based on the received dynamic parameters and the number of requested slots, the base station scheduler allocates a dynamic parameter minislot as well as uplink data slots into VBR terminals. Also the scheduler allocates uplink data slots into ABR terminals in proportion to the number of requested slots.