• 한국전산유체공학회:학술대회논문집
• /
• 1999.05a
• /
• pp.73-78
• /
• 1999

극초음속 유동장의 정확한 해석을 위해 AUSMPW+ 수치기법과 충격파 포착시 생기는 수치오차를 제거하기 위해 충격파 정렬 기법(Shock-Aligned Grid Technique)을 개발하였다. AUSMPW+ 수치기법은 자체 수치점성이 적은 수치기법으로 점성 경계층 계산시 정확한 계산결과를 보여주며 기존의 AUSM 계열이 가지는 문제점인 물성치의 진동 현상을 제거한 수치기법이다. 원통형과 무딘 물체 주위의 극초음속 유동장 해석을 통해 공력이 진동현상 없이 정확하게 계산됨을 확인하였다. 그리고 충격파 정렬 기법의 특성을 파악하기 위해 충격파 반사문제와 충격파-충격파 상호작용 문제를 해석하여 수치오차 없이 충격파를 포착할 수 있음을 보였다. 또한 화학적 평형 비평형 유동 영역까지 충격파 정렬 격자 기법을 확장하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.4
• /
• pp.265-273
• /
• 2014

Wave-body interaction is simulated using a developed code based on the flux-difference splitting scheme for immiscible and incompressible fluids and the hybrid Cartesian/immersed boundary method. A free surface is captured as a moving contact discontinuity within a fluid domain and an approximated Riemann solver is used to estimate the inviscid flux across the discontinuity. Immersed boundary nodes are identified inside an instantaneous fluid domain near a moving body, then dependent variables are reconstructed at those immersed boundary nodes based on interpolation along local normal lines to the boundary. Free surface flows around an oscillating cylinder are simulated and the computed wave elevations are compared with other reported results. The generation of a solitary wave by a moving wave-maker is simulated and the time histories of wave elevations at two different points are compared with other results. The developed code is applied to simulate body motion of an elastically mounted circular cylinder as a solitary wave passes the body. The force acting on an elastically mounted cylinder is compared with the force acting on a fixed cylinder. Grid independency of the computed body motion is established based on a comparison of results using three different-size grids.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.222-222
• /
• 2023

오픈 소스 유체역학 소프트웨어인 OpenFOAM은 다양한 유체 흐름에 적용 가능한 프로그램들로 구성되어 있다. 이 중 interFoam은 밀도가 다른 두 유체(i.e., 물, 공기) 간의 경계를 추적하는 기법을 기반으로 한 프로그램으로, 파랑의 거동 모의에 주로 쓰이고 있다. 파생형 프로그램으로는 동격자(dynamic mesh) 및 중첩 격자 기법(overset grid method)을 interFoam에 추가한 overInterDyMFoam이 있다. 두 기법을 사용하면 각각 여러 영역에서 유체흐름과 다중 물체 간의 상호작용을 효율적으로 모의할 수 있다. 본 연구에서는 overInterDyMFoam을 사용하여 두 개 수문의 개방 움직임을 구현하고 생성된 파랑이 포말대(swash zone)에 접근하였을 때의 흐름 특성을 조사하였다. 수치모형실험 결과 수문 개방 속도가 댐 붕괴 파랑 흐름 전파속도에 영향을 미치는 사실을 발견하였다. 또한, 처오름과 처내림의 상호작용에 의한 난류 운동 특성을 조사하기 위해 수문 개방시간 간격을 0초~3초로 설정하였다. 수치모형실험 결과는 수리모형실험의 수면 변동 시계열과 속도 시계열 결과와 비교하여 모형의 정확성이 검증되었다.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.753-757
• /
• 2004

The free-surface flow is simulated to make clear the viscous interaction of stem waves and the sub-breaking phenomena around a high speed vehicle. The Navier-Stokes equation is solved by a finite difference method where the body-fitted coordinate system, the wall function and the triple-grid system are invoked They are applied to study precisely on the stem flow of S-103 as to which extensive experimental data are available. Computations are extended to the submerged revolutional body. The numerical result shows that the gradient of M/Us is greatly influenced by the submerged depth And the stem wave is influenced by the separation due to the bow wave.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.12-20
• /
• 2011

In this paper, we propose an efficient object detection and classification algorithm for video surveillance applications. Previous researches mainly concentrated either on object detection or classification using particular type of feature e.g., Scale Invariant Feature Transform (SIFT) or Speeded Up Robust Feature (SURF) etc. In this paper we propose an algorithm that mutually performs object detection and classification. We combinedly use heterogeneous types of features such as texture and color distribution from local patches to increase object detection and classification rates. We perform object detection using spatial clustering on interest points, and use Bag of Words model and Naive Bayes classifier respectively for image representation and classification. Experimental results show that our combined feature is better than the individual local descriptor in object classification rate.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.615-624
• /
• 2016

In this study, two rectangular barges in close proximity were simulated to analyze the characteristics of motion responses due to hydrodynamic interactions. Using a numerical solution from DNV-GL SESAM, coupled stiffness matrix terms for these same FEM models were added to the multiple body modes in the surge direction. Potential theory was used to calculate the first order radiation and diffraction effects on the simulated barge models. In the results, the sheltering effect of the barges was not shown at 1.3 rad/s with hull separation of 20 m in transverse waves. The separation effect between the barges was more clear with longitudinal waves and a shallow water depth. However, sway forces were influenced by hull separation with transverse waves. The peaks for sway and heave motion and sway force occurred at higher frequencies as hull separation narrowed with longitudinal and transverse waves. Given a depth of 10 m, the sway motion on the lee side of a coupled barge made a significant difference in the range of 0.2-0.8 rad/s with transverse and oblique waves. Also, the peaks for sway force were situated at lower frequencies, even when incident waves changed.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.131-139
• /
• 1992

By introducing a body potential, the high-oder spectal method of Dommermuth and Yue(1987) is extended to treat the nonlinear interactions between the free surface and the submerged cylinder. A 2-dimensional numerical wave tank is developed based on this numerical scheme, and applied to the wave resistance problem and the wave maker problem. In the simulations, it is shown that the transient waves due to the impulsive start of the body motion make a practical obstacle to the acquisition of useful data from the numerical experiments. Gradual starting procedures are devised, and successful result of the quasi-steady state or the uniform regular wave group was obtained. Within the author's present knowledge, the present numerical scheme is one of the most efficient numerical schemes which can treat the nonlinear interactions between the free surface and the body motion in time-domain.

• Journal of Power System Engineering
• /
• v.15 no.6
• /
• pp.27-34
• /
• 2011

The increasing capabilities of the computers enable us to utilize various numerical schemes for the time-domain simulations concerned with 3-dimensional free-surface wave problems. There are still difficulties to solve such kind of problems, however. That's because long time simulations with large computational domain are needed in time-domain analysis. So, we need faster and more efficient numerical schemes to get the solutions practically for these problems. In this paper, a high-order spectral/boundary-element method is used for the numerical investigation of physics involved in wave-body interaction. This method is one of the most efficient numerical methods by which the nonlinear gravity waves can be simulated and hydrodynamic forces also can be calculated in time-domain. To get the robust study in these topics, various numerical tests are performed and compared with others' works.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.307-310
• /
• 2000

평판에서 발생되는 램파가 물체 내에 존재할 수 있는 미세 결함과의 상호작용에 의해 비선형 음향효과를 발생시키는지 관찰하고 이로부터 결함의 존재 유$\cdot$무를 확인하고자 했다. 이차원의 판형 매질로서 $2000{\times}110{\times}2{\cal}mm^3$인 강철판을 사용했으며 결함은 강철판의 임의의 위치에 인위적으로 미세틈새를 형성하여 모델화시켰다. 488kHz의 저주파수 연속파와 톤버스트 형태의 1MHz 고주파수 음파를 입사시켰다. 결함의 유$\cdot$무에 따른 강철판에서의 수신음파에 대한 주파수 응답을 통하여 비선형 음향반응인 배진동 주파수와 합$\cdot$차 주파수의 발생을 관측함으로써 매질 내의 결함 유$\cdot$무를 판별하고자 했다. 결함이 존재할 경우, 존재하지 않을 경우와 비교했을 때 배진동 주파수는 진폭이 15dB, 합$\cdot$차주파수는 진폭이 18dB이상 증가됨을 관찰함으로써 평판에서의 결함의 존재 유$\cdot$무를 확인할 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.688-698
• /
• 2009

In this paper, the steady lift force acting on a slender body moving beneath regular wave systems of arbitrary wavelengths and directions of propagation is considered. The momentum conservation theorem and the strip method are used to obtain the hydrodynamic forces acting on the body and affecting its motions on the assumption that the body is slender. In order to obtain the vertical steady force acting on it, or the free surface suction force, the second-order hydrodynamic forces caused by mutual interactions between the components of the first-order hydrodynamic forces are averaged over time. The validity of the method is tested by comparison of the calculated results with experimental data and found to be satisfactory. Through some parametric calculations performed for a typical model, some useful results are obtained as to the depth of submergence of the body, wavelengths, directions, etc.