• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.38-52
• /
• 1991

In this paper, a semi-Lagrangian method is used to solve the nonlinear hydrodynamics of a three-dimensional body beneath the free surface in the time domain. The boundary value problem is solved by using the boundary integral method. The geometries of the body and the free surface are represented by the curved panels. The surfaces are discretized into the small surface elements using a bi-cubic B-spline algorithm. The boundary values of $\phi$ and $\frac{\partial{\phi}}{\partial{n}}$ are assumed to be bilinear on the subdivided surface. The singular part proportional to $\frac{1}{R}$ are subtracted off and are integrated analytically in the calculation of the induced potential by singularities. The far field flow away from the body is represented by a dipole at the origin of the coordinate system. The Runge-Kutta 4-th order algorithm is employed in the time stepping scheme. The three-dimensional form of the integral equation and the boundary conditions for the time derivative of the potential Is derived. By using these formulas, the free surface shape and the equations of motion are calculated simultaneously. The free surface shape and fille forces acting on a body oscillating sinusoidally with large amplitude are calculated and compared with published results. Nonlinear effects on a body near the free surface are investigated.

• The Bulletin of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.57.2-57.2
• /
• 2005

• Journal of the KSME
• /
• v.28 no.6
• /
• pp.556-562
• /
• 1988

기계나 구조물의 수명을 결정하는 마멸은 물체간의 접촉으로 인한 것이고 마멸을 줄이기 위해 윤활이 발달되어 왔다. 여러 형태의 마멸을 해석하기 위해서 접촉역학의 이해는 필수적이라 할 수 있다. 하중과 운동 조건에 의한 다양한 접촉문제를 일반적으로 다루기 위해 접촉면을 중심 으로 한 접근 방법을 소개하였으며, 접촉문제의 특이성을 보이기 위해 마찰접촉문제 해석을 위한 한기법을 간단히 기술하였다. 고속 볼 베어링의 특성 해석과 접촉형상 최적설계를 통하여 광 범위한 접촉 역학의 적용의 일부를 소개하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.11a
• /
• pp.29-41
• /
• 1986

마찰계수는 서로 접촉하여 운동하는 두 물체간의 특성으로 간주되며 일반적으로 상대속도나 작용하중에 별로 영향을 받지 않는 것으로 알려져 있다. 화학적으로나 물리적으로 오염되지 않은 깨끗한 금속간의 마찰실험의 경우, 이 실험이 불활성 가스나 진공내에서 행해질 경우 상당히 큰 마찰저항을 경험하게 되나, 공기중에서의 실험에서는 작은 마찰저항이 기록되어 산화막이나 다른 오염물에 의해 형성된 막이 마찰저항을 감소시킨다고 보고 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.36-42
• /
• 2003

A CFD simulation technique has been developed to handle the unsteady body motion with large amplitude by use of overlapping multi-block grid system. The three-dimensional, viscous and incompressible flow around body is investigated by solving the Navier-Stokes equations, and the motion of body is represented by moving effect of the grid system. Composite grid system is employed in order to deal with both the body motion with large amplitude and the condition of numerical wave maker in convenience at the same time. The governing equations, Navier-Stokes (N-S) and continuity equations, are discretized by a finite volume method, in the framework of an O-H type boundary-fitted grid system (inner grid system including test model) and a rectangular grid system (outer grid system including simulation equipments for generation of wave environments). If this study, several flow configurations, such as an oscillating cylinder with large KC number, are studied in order to predict and evaluate the hydrodynamic forces. Furthermore, the motion simulation of a Series 60 model advancing in a uniform flow under the condition of enforced roll motion of angle 20$^{\circ}$ is performed in the developed numerical wave tank.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.905-910
• /
• 2008

In this paper, a circular motion table which is able to simulate movement of object is designed and the experiment of control system using circular motion table is presented. Circular motion table is consisted of three axes changed on length and of ball splines which keep vertical centre axis of circular plate. Variable length of three axes make circular plate incline as vertical centre axis is kept on vertical center axis of circular motion table. It is designed that control system drives three servo motor, that is, make change length of axis simultaneously or independently. And this paper presents example of flight simulation using circular motion table. it will contribute toward nurture expert manpower of aerospace/robotics to popularize circular motion table and make an experiment using it.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1509-1517
• /
• 1993

The purpose of this study is to develop a program for the automatic derivation of the symbolic equations necessary for the kinematic and dynamic analyses of the spatial mechanism. For this purpose, a symbolic manipulation package called MCSYMA is used. Every symbolic equation is formulated using relative joint coordinate to obtain the numerically efficient system equations. These equations are produced in FORTRAN statements and linked to a FORTRAN program for numerical analysis. Several examples are taken for comparison with the commercial package called DADS which is using Cartesian coordinate approach. Also, this symbolic formulation approach is compared with a conventional numerical approach for an example. The results show that this symbolic approach with relative joint coordinate system is most efficient in computational time among three and is recommended for the derivation of macro elements frequently used.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.59-64
• /
• 2001

In this paper it was proposed method that solve problems of method to segment region of zero disparity and algorithm that extract binocular disparity to estimate position of object by vergence movement of moving stereo cameras experimented to compare those. There was not change of density value almost in region that change of critcal value was not found almost in image, because a high critical value was set so that critical value may be kipt changelessly about all small regions in studied treatise so far. The corresponding points were extracted wrongly by the result. By because the characteristics of small region was evaluated by autocorrelation and the critical value was established that may be proportional to the autocorrelation value, it was confirmed that corresponding points are not extracted almost by mistake and binocular disparity could by extracted with high speed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.115-120
• /
• 2014

In this study, a module is developed for modeling and analyzing dynamic behavior of a wind turbine using RecurDyn, which is a commercial multi-body dynamics software developed by FunctionBay, Inc. The wind turbine consists of tower, nacelle, hub and blades. Tower and blades are regarded as flexible bodies for considering elastic effect using beam theory and spring force. In this paper, a constant speed wind was assumed and aerodynamic force is modeled using BEM theory. Dynamic analysis applying this aerodynamic force is carried out. To verify the validity of analysis results, these results are compared to those of GH-Bladed which is a commercial software for analyzing wind turbine system distributed by Garrad Hassan.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.1-13
• /
• 2005

Kinematics of grasping and manipulation by a multi-fingered robotic hand where multi-fingertip surfaces are in contact with an object is solved. The surface of the object was represented by B-spline surfaces in order to model the objects of various shapes. The fingers were modeled by cylindrical links and a half ellipsoid fingertip. Geometric equations of contact locations have been solved for all possible contact combinations between the fingertip surface and the object. The simulation system calculated joint displacements and contact locations for a given trajectory of the object. Since there are no closed form solutions for contact or intersection between these surfaces, kinematics of grasping was solved by recursive numerical calculation. The initial estimate of the contact point was obtained by approximating the B-spline surface to a polyhedron. As for the simulation of manipulation, exact contact locations were updated by solving the contact equations according to the given contact states such as pure rolling, twist-rolling or slide-twist-rolling. Several simulation examples of grasping and manipulation are presented.