• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.77-85
• /
• 2019

Biogasification is a technology that uses organic wastes to reproduce as environmental fuels containing methane gas. Biogasification has attracted worldwide attention because it can produce renewable-energy and stable land treatment with prohibit from landfilling and ocean dumping of organic waste. Biomethane is produced by refining biogas. It is injected into natural gas pipeline or used transportation fuel such as cars and buses. 90 bio-gasification facilities are operating in 2016, and methane gas production is very low due to it is limited to organic wastes such as food waste, animal manure, and sewage sludge. There are seven domestic biomethane manufacturing facilities, and the use of high value-added such as transport fuels and city-gas through upgrading biogas should be expanded. On the other hand, the rapid biogasification of organic wastes in domestic resulted in frequent breakdowns of facilities and low efficiency problems. Therefore, the problem is improving as technical guidance, design and operational technical guidance is developed and field experience is accumulated. However, while improvements in biogas production are being made, there is a problem with low utilization. In this study, the problems of biomethane manufacturing facilities were identified in order to optimize the production and utilization of biogas from organic waste resources. Also, in order to present the design and operation guideline of the gas pretreatment and the upgrading process, we will investigate precision monitoring, energy balance and economic analysis and solutions for on-site problems by facility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.506-512
• /
• 2018

The fine dust generated in the home and restaurant business occupies a low ratio of about 4% of the total fine dust emissions. However, at the foodservice business, the rate of change of the pollutant concentration is very high, so that the temporary fine dust concentration can be measured up to 60 times. The pollutants generated from non-industrial combustion plants consist of particulate fine dust and gaseous organic compounds. To remove these pollutants, cleaning dust collection system, which is an effective system for simultaneous removal of gaseous and particulate matter, is applied. This is a method of increasing the probability of diffusion capture of the Brownian motion by pressurized liquid injection method using the atomizing nozzle. The dust removal efficiency of the fine dust collecting system was analyzed by nozzle spraying air pressure condition and angle using the manufactured fine dust removing system. As a result, it was confirmed that the efficiency of removal of fine dust and gaseous organic compounds was more than 90%. The developed system is expected to be highly usable in the future because it can remove particulate dust from the existing plant hood system without any installation cost.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.192-217
• /
• 2008

This paper investigated the perceived criticalities and patterns of Korean Professional Engineer's competency regarding the working activities of automative product development, manufacturing, etc by using questionnaires responded to the survey which were applied to the automotive professors, experts and professional engineers (vocational parties) by e/mail, etc. This research investigated the following questions: First, what are the characteristic patterns, relevancy and perceived criticalities of Korean Professional Engineer's competencies? Second, What are the ranked priority of the Korean Professional Engineers' competencies? Are there any differency for each item, sub group of job, intelectual criterior of the competencies between relevancy and perceived criticalities according to the types of vocational parties, etc.? Accoring to the results; first, Professor group showed highest points among 3 groups per each item of the competencies by vocational parties Second, Chassis design group ranked top position among the 8 sub groups by vocational parties and, third, Problem Solving Knowledge ranked highest points than any others. Korean Professional Engineers are found to be positioned as key members, leaders and managers on surveying market, product planning, designing product & components, developing component parts, establishing shop with production equipment, managing quality control & material handling, organizing relevant meetings, developing human resources by training and learning, to back up finance with law matters, cooperating with concerned parties to achieve organizational goals, and to coordinate projects. etc, identifying ethical issues and business skills in order to survive and win to be competitive in various kinds of the automotive industry battle fields.

• Management & Information Systems Review
• /
• v.39 no.2
• /
• pp.39-60
• /
• 2020

Block chain technology is one of the core elements for realizing the 4^th industrial revolution, and many efforts have been made by government and companies to provide services based on block chain technology. In this study we analyzed the benefits of block chain technology for EVMS and designed EVMS block chain platform with increased data security and work efficiency for project management data, which are important assets in monitoring progress, foreseeing future events, and managing post-completion. We did the case studies on the benefits of block chain technology and then conducted the survey study on security, reliability, and efficiency of block chain technology, targeting 18 block chain experts and project developers. And then, we interviewed EVMS system operator on the compatibility between block chain technology and EVM Systems. The result of the case studies showed that block chain technology can be applied to financial, logistic, medical, and public services to simplify the insurance claim process and to improve reliability by distributing transaction data storage and applying security·encryption features. Also, our research on the characteristics and necessity of block chain technology in EVMS revealed the improvability of security, reliability, and efficiency of management and distribution of EVMS data. Finally, we designed a network model, a block structure, and a consensus algorithm model and combined them to construct a conceptual block chain model for EVM system. This study has the following contribution. First, we reviewed that the block chain technology is suitable for application in the defense sector and proposed a conceptual model. Second, the effect that can be obtained by applying block chain technology to EVMS was derived, and the possibility of improving the existing business process was derived.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.165-176
• /
• 2016

The purpose of this study is to examine the effects of the IT resources on the work efficiency and corporate performance in Mobile Smart-Work Environment with IT convergence Technology by applying the Resource-Based View. The study has an academic meaning by empirically analyzing the effects of factors identified based on the existing study on the IT resources in Mobile Smart-Work, and practical implications to identify how the significance of the Mobile Smart-Work used as a platform of variety industries in manufacturing, logistics, service, distribution, finance, public institutions, and so on positively affects improvement of corporate efficiency and performance. The results showed that IT Infrastructure and IT skills in the Mobile Smart-work environment were found to bring positive effects on individual work efficiency, and IT skills had positive influence on team work efficiency. Also, we confirmed the individual and team work efficiency positively affect financial and market performance of business firms. Finally, we expect that business firm equipped with IT resources in the Mobile Smart-Work environment with IT convergence Technology. It can improve this work efficiency and the performance, which leads to strengthening the core competency.

• Korean Security Journal
• /
• no.10
• /
• pp.387-407
• /
• 2005

Thanks to the developments of IT technologies, such critical infrastructures as fundamental structures of energies, material circulations, monetary circulations, and living necessaries are intertwined as well as mutually dependent. In this respect, the fact that national infrastructures are closely related to IT infrastructures implies not only expected benefits to provide diverse information-based services, but also anticipated costs to bring about new dangers. However, in spite of these threats, traditional researchers have not put enough interests in these indirect danger, which yield the damages in broad areas through paralyzing risk management systems, although they have investigated such direct threats as nuclear accidents, conflagrations, traffic troubles, and gasoline accidents. Considering that the tendency to depend on electricity, so-called electrification, which is caused by automation and informationalization, is intensified in all parts of society, the breakout problem as a factor to inhibit securities in information-oriented society is significant. Thus, the problems of large-scale power blackout should be treated as national crises. Also, preparation systems for large-scale power blackout have to be provided quickly. In this paper, with analyzing various cases of large-scale power blackout and investigation the causes of them, researches on the blackout management systems of Korea are to be present, on the basis of national crisis management states which are comprised of protection (mitigating and preparing), responding, and recovering(rewarding).

• Information and Communications Magazine
• /
• v.24 no.7
• /
• pp.26-35
• /
• 2007

최근 몇 년간 유비쿼터스 서비스를 구현하기 위한 핵심 기술 중 하나인 무선 센서 네트워크에 대한 관심이 높아지고 있다. 무선 센서 네트워크 기술은 물류, 유통, 환경 감시, 홈오토메이션, 군사 분야 등 다양한 분야에 적용 될 수 있기 때문에 앞으로 관련 분야의 시장 또한 커질 것으로 예상되고 있다 [1]. 무선 센서 네트워크는 기존 유선 센서 네트워크나 무선 네트워크 환경과는 많은 차이를 가진다. 우선 극도로 제한된 시스템 자원만을 가질 수 있으며, 열악한 환경 속에서 무선매체를 통해 유기적으로 동작하여야 하는 특징을 가지고 있다. 적게는 수십 개에서 많게는 수백, 수천 개의 자율적인 하드웨어 노드들로 구성되는 무선 센서 네트워크에서 제한된 자원을 효과적으로 활용하기 위해서는 센서 노드에 적합한 운영체제가 필수적으로 요구된다. 지난 몇 년간 센서 노드하드웨어의 발달과 더불어 많은 센서 네트워크용 초소형 운영체제가 개발되어왔다. 현재 많이 알려져 있는 센서 네트워크용 OS로는, 가장 활발한 참여를 보이고 있는 TinyOS[3]부터 SOS[4], MANTIS[5], Contiki[6], T-kernel[7] 등이 있으며, 국내 기술로 개발된 Nano-Qplus[8] 등이 존재한다. 본고에서는 우선 센서 네트워크에 대한 배경 지식과 플랫폼 등에 대한 내용을 간단히 다루고, 본론에서 센서 네트워크용 운영체제가 가져야 할 조건과 현재 개발되어 있는 센서 네트워크 OS들의 특징에 대해 간략히 살펴보도록 하겠다. 또한 센서 네트워크 OS와 밀접한 연관성을 가지는 분야에 대해 간단히 살펴보고, 마지막으로 앞으로의 방향에 대해 알아본다.고려해 볼 때 atlas의 장축의 시계방향 회전은 액티베이터의 사용 효과로 생각되며, 이는 차후 II급 부정교합자에서 액티베이터 치료 효과를 판단하는 또 하나의 지표가 될 수 있다고 생각한다.인해 한반도를 포함한 동아시아 대륙이 태평양판 쪽으로 밀려감으로써 섭입하던 태평양판의 각도가 급해져 동아시아 연변에 강력한 흡입력이 발생하였으며, 이 때문에 태평양판의 운동 방향이 북북서에서 서북서방향으로 회전되었을 가능성이 있다. 따라서 약 51 Ma부터 한반도 동남부에는 지판 경계의 강력한 흡입력으로 동서 내지 서북서-동남동의 인장력이 작동되어 B그룹 암맥군이 관입한 것으로 해석된다.Ledge는 세 군 모두에서 나타나지 않았다. 4. 파일 binding 횟수는 MC군이 가장 적고 PT군이 가장 많았다 (p < 0.05). 이상의 결과를 볼 때, Mtwo 전동 파일을 crown-down technique으로 사용하는 것이 single length technique과 유사한 성형 효율을 보이면서도 더 안전할 것으로 추정된다.고 1명(3%)에서 원격전이를 보였다. 치료 중 급성 합병증으로 11명(37%)에서 RTOG grade 1-2의 장염을 보였으며 1명은 대장의 천공이 발생하여 수술로 치유되었다. 12명(40%)에서 RTOG grade 1-2의 급성 방광염을 보였다. 3명(10%)에서 RTOG grade 1-2의 백혈구 감소증이 보였으며 1명에서 심한 백혈구 감소증(RTOG grade 4)이 나타났으나 회복되어 치료를 완료하였다. 만성 합병증으로 5명(15%)에서 RTOG grade 1-2의 만성 장염을 보였으며 별다른 치료 없이 지내고 있으며

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.181-181
• /
• 2011

도로는 국내 물류를 담당하는 중요한 기반시설로 국내 경제성장의 중추적인 역할을 담당하고 있다. 특히, 1970년대 개통된 경부고속도로는 우리나라의 대동맥으로 산업 성장의 파급효과를 가져오는 기반이 되었고, 공학적인 차원에서도 도로 포장재료를 경험 및 과학적으로 분석하여 적용하는 계기로 도로공학발전의 초석이 되었다. 과거에 적용된 도로 포장재료는 기술자의 경험에 의존하여 배합설계가 진행되었으며, 중차량의 비중이 많은 지역은 강성포장을 적용하고, 상대적으로 중차량이 적은 구간은 연성포장을 적용하는 설계를 따랐다. 하지만, 강성포장을 대표하는 시멘트 콘크리트 포장은 시공상의 복잡함과 시멘트 콘크리트 특성상 강도발현을 위해서 일정기간 이상의 양생일수가 필요하므로, 도로건설의 인프라 구축이 시급한 지역에서는 사용의 제약이 따른다. 연성포장을 대표적하는 재료로는 아스팔트 콘크리트 포장을 들 수 있다. 강성포장보다는 상대적으로 시공상의 편리함과 일정기간의 양생이 필요하지 않아 도로 포장재료로서 그 적용성이 우수하다. 과거에는 아스팔트 콘크리트 포장의 종류가 단순화되어 표층, 기층에 대표되는 몇몇 혼합물이 도로 포장재료로 사용되었다. 도로공학의 학문적 발달과 함께 도로포장의 전반적인 기술이 향상되고 있다. 과거의 도로 기능은 국가 경제발전을 위한 산업용 원자재의 운반이 주요 기능을 담당하고 있는 반면, 국민의 경제적 수준이 증대되고 자가용의 보급이 보편화되면서 도로 이용의 주체가 국민 개개인으로 변화되고 있고, 그 요구조건도 다양화되고 있다. 이에 발맞추어 도로공학의 기술적 향상으로 다양한 기능을 발휘할 수 있는 도로포장재료가 개발되고 있으며, 대표적인 제품으로는 배수성 포장, 반강성 포장, 보수성 포장, 탄성 포장, 저소음 포장 등이 있다. 본 연구에서는 기능성 포장의 하나인 저소음 포장의 특성 중 생산성능을 평가하였다. 생산성능이란 저소음포장을 현장 플랜트에서 생산하였을 경우의 특성을 분석하는 과정으로, 실내 실험으로 최적화된 재료의 배합은 이상적인 조건을 적용하여 결정된 것으로 입고된 현장 골재 및 생산 플랜트 조건에 따른 그 배합 및 물성이 변동을 가져올 수 있다. 특히, 저소음 포장은 기존의 아스팔트 포장과 달리 적용되는 골재, 아스팔트의 재료가 고성능을 발휘하기 위하여 특수한 재료를 적용해야 한다. 배합설계에서도 개립도 아스팔트 혼합물에 적용되는 내구성분석 절차를 따라야 하므로, 실내 배합설계 혼합물과 현장 생산 혼합물간의 물리적 특성에 차이를 나타낼 수 있다. 따라서, 본 연구에서는 실내 및 현장 혼합물의 전반적인 물리적 특성의 차이를 분석하여 저소음 포장의 현장 생산성능을 확인하였다. 분석요소로는 혼합물의 기초물성면에서는 밀도, 공극률을 분석하였으며, 실내 내구성면에서는 마샬안정도, 잔류안정도를 분석하여 실내 및 현장 혼합물의 물성차이를 분석하였다. 기초물성을 평가할 수 있는 밀도와 공극률에서는 생산 현장 혼합물이 실내 혼합물 보다 높은 밀도와 낮은 공극률을 나타내고 있으며, 이에 상관하여 강도특성을 분석할 수 있는 마샬안정도도 생산 현장 혼합물이 다소 높은 강도를 발휘하였다. 또한, 수분에 대한 안정성을 평가하는 인자인 잔류 안정도에서는 실내 및 현장 혼합물 모두 우수한 성능을 발휘하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6B
• /
• pp.561-571
• /
• 2006

RFID technology, as one contact-less identification technology with using electronic tag, is the field where its multiple researches have been studied. Especially, in the field of supply chain management, when it is necessary to identify a lot of objects by real-time, performance of anti-collision algorithm for multiple tag identification has an effect on performance of entire system. GEN2 is global, open, interoperability protocol for UHF RFID system, the active researches and developments are processed about it. In this paper, we introduce an anti-collision algorithm based on Slotted-ALOHA for GEN2 protocol, focus on estimating number of tags and setting number of slots and review the previous works. We propose new scheme that can estimate number of tags efficiently, and define system efficiency newly when it's used in setting number of slots. We also present result of compare and analysis with previous scheme through simulation. The proposed scheme of estimating number of tags is easy to implement, number of tags which is less than 4 times of number of slots can estimate tags efficiently, we also proved that identification efficiency based on weighted-slot distinguished with definition of previous slot efficiency can improve system efficiency.

• Journal of Internet Computing and Services
• /
• v.21 no.1
• /
• pp.17-31
• /
• 2020

With the rapid development of block chain technology, attempts have been made to put the block chain technology into practical use in various fields such as finance and logistics, and also in the public sector where data integrity is very important. Defense Operations In addition, strengthening security and ensuring complete integrity of the command communication network is crucial for operational operation under the network-centered operational environment (NCOE). For this purpose, it is necessary to construct a command communication network applying the block chain network. However, the block chain technology up to now can not solve the security issues such as the 51% attack. In particular, the Practical Byzantine fault tolerance (PBFT) algorithm which is now widely used in blockchain, does not have a penalty factor for nodes that behave maliciously, and there is a problem of failure to make a consensus even if malicious nodes are more than 33% of all nodes. In this paper, we propose a Adaptive Consensus Bound PBFT (ACB-PBFT) algorithm that incorporates a penalty mechanism for anomalous behavior by combining the Trust model to improve the security of the PBFT, which is the main agreement algorithm of the blockchain.