• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.257-262
• /
• 2013

In mobile market which has been developed drastically, short distance mobile Near Field Communication is becoming the conversation topic. Google adopted this NFC technology to Android 플랫폼 for securing the leadership and many another countries including domestic companies are putting spurs to develop service and technology by connecting mobile carrier and the financial. Within this circumstance, most noticeable issue is securing stability of nfc application service. Android 플랫폼 is operating system of mobile device and also a software stack which is required limited hardware and immediate response. However, since its structural characteristic which is suitable for limited hardware, the response is not quite stable for real time process. That is, this paper researches by analyzing real time response of NFC related library provided from Android 플랫폼 and applying the result to NFC application for securing stable data process and response.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.10
• /
• pp.17-23
• /
• 2003

In this study, microscale, high-performance, solenoid-type RF chip inductors were investigated. The size of the RF chip inductors fabricated in this work was 1.0${\times}$0.5${\times}$0.5㎣. The materials (96% Al2O3) and shape (I-type) of the core were determined by a Maxwell three-dimensional field simulator to maximize the performance of the inductors. The copper (Cu) wire with 40${\mu}{\textrm}{m}$ diameter was used as the coils. High frequency characteristics of the inductance (L), quality-factor (Q), and capacitance (C) of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). The inductors developed have inductances of 11 to 39 nH and quality factors of 28 to 50 over the frequency ranges of 250MHz to 1 GHz, and show results comparable to those measured for the inductors prepared by CoilCraf $t^{Tm}$ that is one of the best chip inductor company in the world. The simulated data predicted the high-frequency data of the L, Q, and C of the inductors developed well.l.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.252-258
• /
• 2013

As WSN is energy constraint so energy efficiency of nodes is important. Because avoiding long distance communication, clustering operating in rounds is an efficient algorithm for prolonging the lifetime of WSN and its performance depends on duration of a round. A short round time leads to frequent re-clustering while a long round time increases energy consume of cluster heads more. So existing clustering schemes determine proper round time, based on the parameters of initial WSN. But it is not appropriate to apply the round time according to initial value throughout the whole network time because WSN is very dynamic networks nodes can be added or vanished. In this paper we propose a new algorithm which calculates the round time relying on the alive node number to adapt the dynamic WSN. Simulation results validate the proposed algorithm has better performance in terms of energy consumption of nodes and loss rate of data.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.188-191
• /
• 2016

In this paper, we propose energy-efficient automatic power controller which can power on and off the signboard at the specified light intensity using the Illuminance Detector. By using segmented section Classification algorithm, light intensity setup system propose variable resistor method which makes users more easy to control. Automatic light on-off system set a standard by measured illuminance data. Measured light-intensity through the Illuminance Detector are communicated with the signboard power controller with wireless communication, and it controls lighting system. In this paper, we evaluated the Energy-Efficient Automatic Power Controller of The Signboard using illuminance detector. Experimental results in lightless environment shows that the error rate is less than 3% by Accredited Testing Laboratories.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.641-651
• /
• 2002

Recently, many advanced video application services over the mobile wireless networks have required a transcoder which can efficiently reduce the size of compressed video bitstreams. The transcoder can be worked in either the spatial domain or the DCT domain. In this paper, we propose a new fast hybrid-type transcoder which can efficiently reduce the frame size with keeping the visual quality. The proposed scheme consists of two major processes: a transform domain process and a spatial domain process. We also propose a scheme for coding mode selection and motion vector refinement. Experimental results show that our approach can reduce the computational complexity more than any other conventional spatial-domain transcoder with keeping the visual quality.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.3 s.11
• /
• pp.13-23
• /
• 2006

The system using UWB is processing brisk study with Bluetooth among the wireless access that is major technology in Telematics. The low complexity and cost for realization is advantage of UWB have communication of high speed. Mamy papers have published on the timing jitter effect on system performance except for the UWB system. In this paper, we analyze the effect of timing jitter on M-ary UWB system using orthogonal Hermite pulse and perform the simulation to show symbol error rate performance. For theoretical analysis, we derive correlation function of orthogonal Hermits pulse with closed form, and as well upper bound of Symbol Error Probability for M-ary orthogonal Hermite pulse system mathematically. It is found that numerical analysis is accurate enough through simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1287-1296
• /
• 2009

It is very important to estimate the Signal to Noise Ratio(SNR) of received signal in time varying channel state. Most SNR estimation techniques derive the SNR estimates solely from the samples of the received signal after the matched filter. In the severe distorted wireless channel, the performance of these estimators become unstable and degraded. LP-based SNR estimator which can operate on data samples collected at the front-end of a receiver shows more stable performance than other SNR estimator. In this paper, we study an efficient SNR estimation algorithm based on LP and propose a new estimation method to decrease the computation complexity. Proposed algorithm accomplishes the SNR estimation process efficiently because it uses the forward prediction error and its conjugate value during the linear prediction error update. Via the computer simulation, the performance of this proposed estimation method is compared and discussed with other conventional SNR estimators in digital communication channels.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.490-493
• /
• 2014

To protect the students from food poisoning, in this paper, it is proposed that the Smart HACCP system which based with WCDMA-LTE to monitoring the temperature and humidity of a freezer, a heating cabinet and kitchen instruments at the elementary, junior and high school. After gathering the data, It is compared with a standard food poisoning index to provide more safe food reserves from the server. Then the server send a index to the terminal which is installed in a kitchen at any school to show the current environment. It is need an WCDMA-LTE terminal to realize smart HACCP system that is proposed from this paper. So, the proposed WCDMA-LTE terminal is designed with using a LTE modem included a 424 MHz wireless modem and a bluetooth 4.0 modem to communicate with other terminals. It can be use the monitoring system of a plastic greenhouse or remotely environment control system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3391-3397
• /
• 2011

These excavators have been widely used due to their flexibility in handing various tasks via simple changes of their attachments. Since the performance of manually-operated excavators heavily depend on the operators' skill level, there is a strong need for developing automatic excavators in the industry. In order to achieve such goals, exiting approaches have studied direct modification of existing hydraulic systems in the excavator for feed back control of each link. This paper presents a miniaturized automatic excavator that can be used for the development and demonstration of advanced control algorithm for excavators under a safer environment with reduced cost. Two PCs were installed and connected to the excavator through wireless communications for its control and monitoring. Tracking control of each link using a time varying sliding mode controller was performed through experiments on the developed system to demonstrate its ability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.96-101
• /
• 2003

Korea Sounding Rocket(KSR)-III onboard telemetry system has acquired various data from subsystems and sensors in the rocket, and radiated PCM/FM data using two S-band antennas during the flight. Simultaneously， it is necessary that the ground receiving systems track the rocket, and receive and decode telemetry data. Also post processed telemetry data are needed to be broadcasted on ethernet network in real time. Range safety display system displays flight trajectory using telemetry data in mission control center, and so flight manager makes a decision for flight termination from the trajectory This paper describes operating technique about telemetry reception, the development for the realtime data processing system, and the results for telemetering reception on fight test. We telemetered, processed, and broadcasted numerous telemetry data during the flight test successfully.