• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.76-76
• /
• 2020

국가 물관리일원화 이후, 지방하천 관리에 대한 지자체 역할과 권한이 커지고 있으며, 중앙정부의 물관리 수준에 부합하는 데이터관리 체계구축 및 지속적인 품질관리(Quality Control, QC)와 표준화(Standardization) 기술개발이 요구되고 있다. 지자체의 경우 기존의 행정구역별로 분산 관리해오던 물관리 시스템을 유역단위로 전환할 필요가 있으며, 국가하천 구간과 연계한 종합적인 관리가 필요한 실정이다. 서울시의 물관리 시스템은 자치구별로 산재해 있으며, 관리 주체 및 해당 변수에 따라 제공되는 정보가 다르고 하천유역 단위로 분류되어 있지 않다. 따라서, 서울시와 자치구, 중앙정부 및 관련 기관과의 연계성 있는 정보제공을 위한 데이터 플랫폼 구축 기술개발이 필요한 실정이다. 본 연구에서는, 빅데이터, AI 기술을 활용한 물정보의 품질관리 자동화 기술개발과 지속적인 유지관리 및 표준화 정보제공 시스템 구축 기능을 포함하는 서울시 통합물관리 데이터 플랫폼 구축 목표 모델을 제시하였으며, 서울시 물관리 체계와 관련하여 SWAT 분석을 통한 단계별 사업추진 로드맵을 도출하였다. 분석결과, 서울시 통합물관리 플랫폼 구축을 위해서는 유역별 수량-수질 통합 모니터링 및 모델링 기술개발, 빅데이터 기반 물 정보화 플랫폼 구축 기술개발, 지방하천 유역 거버넌스 구축 및 법제도 정비 방안 마련이 요구되며, 관련하여 주요 이슈(3대 핵심전략, 10개 단위과제)를 도출하여 관련 연구과제를 제안하였다. 마지막으로, 서울시 통합물관리 정책 실현을 위해서는 법제도 마련이 시급하며, 서울시 '통합물관리 기본조례' 제정을 통한 기반을 조성할 필요가 있음을 시사하였다. 또한, 다양한 분야 이해관계자 협의체인 '서울시 통합물관리위원회(가칭)'의 거버넌스를 구성하여 운영하는 것이 현실적이며, 한강유역관리 및 지방하천 관리와 관련한 중추적인 역할 수행과 쟁점 논의 등 합리적 합의가 가능할 것으로 기대한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.97-102
• /
• 2023

This study is to provide improvement of tester for IoT system, which has recently become diversified and large-scale and It is about a method to improve the packet processing performance of the tester and securing flexibility in traffic protocol creation and operation. The purpose of this study is to design a OSS DPDK-based high-speed IoT network performance test system, which pre-verifies and measures the performance of data traffic transmission in an increasingly sophisticated high-capacity IoT network system. The basic structure of the high-speed IoT performance tester was designed using a DPDK-based traffic generator, the expected effect was suggested to traffic modeling and packet generation capability when the system was applied through experiments

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.361-370
• /
• 2024

In this paper, a method was studied for applying a series resonant type fault current limiter that can be manufactured at low cost to the smart grid distribution system. First, the impact of the harmonic components of the short-circuit fault current injected into the series resonance circuit of the fault current limiter on the peak value of the transient response was analyzed, and a methodology for determining the steady-state response was studied using percent impedance-based fault current computation method. Next, the effectiveness of the method was verified by applying it to a test distribution line. The test distribution system using the designed current limiter was modeled using EMTP_RV, and a three-phase short-circuit fault was simulated. In the fault simulation results, it was confirmed that the steady-state response of the fault current accurately followed the design target value after applying the fault current limiter. In addition, by comparing the fault current waveform before and after applying the fault current limiter, it was confirmed that the fault current was greatly suppressed, confirming the effect of applying the series resonance type current limiter to the distribution system.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.4
• /
• pp.133-144
• /
• 2006

It is investigated using ADCIRC model to find an optimal gate operation in order to maintain target water level of the inner Saemangeum Reservoir. Various developing procedures and river inflows conditions are considered in modeling. For the gate operations, consecutive openings to inflow and outflow, such as once a day, twice a day and once per two days are considered. However water level increases gradually due to river inflows regardless of gate operations. In order to maintain target level 0.0 m, it is recommended to shut down of gate in order to prevent inflows of outer sea water at least once per 6 days for normal riverine inflows and once per 3 days for flood inflows during consecutive operations. Then it is balanced within maximum of ${\pm}0.4m$ of deviations from target level of 0.0 meter.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.241-248
• /
• 2024

Socially, organizations are required to effectively manage their information resources, both in terms of acquiring information from external sources and safeguarding against potential breaches by insiders. While information security policies and technologies implemented by organizations contribute to achieving internal security, an overly complex or disorganized security structure can create uncertainty among employees. In this study, we identify factors of structural information security (IS)-related uncertainty within organizations and propose that they contribute to non-compliance. We develop a research model and hypotheses based on previous studies on the information security environment and test these hypotheses using structural equation modeling. Our findings indicate that uncertainties related to IS policy, technology, and communication decrease employees' IS role identity and their intention to comply with IS measures. By addressing these uncertainties, organizations can improve their IS environment and work towards achieving there is goals.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.583-588
• /
• 2024

With the emergence of Brain-Computer Interface (BCI) technology, analyzing mirror neurons has become more feasible. However, evaluating the accuracy of BCI systems that rely on human thoughts poses challenges due to their qualitative nature. To harness the potential of BCI, we propose a new approach to measure accuracy based on the characteristics of mirror neurons in the human brain that are influenced by speech speed, depending on the ultimate goal of movement. In Chapter 2 of this paper, we introduce mirror neurons and provide an explanation of human posture estimation for mirror neurons. In Chapter 3, we present a powerful pose estimation method suitable for real-time dynamic environments using the technique of human posture estimation. Furthermore, we propose a method to analyze the accuracy of BCI using this robotic environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.4
• /
• pp.147-154
• /
• 2024

This study focuses on the modeling and analysis of the linear generator for a bladeless wind power generation to overcome the limitations and drawbacks of conventional wind turbines. A bladeless wind power generation system has the advantages of low land requirement for installation and maintenance cost compared to a blade wind power turbine. Nevertheless, question concerning the generator topology are not satisfying answered. The goal of the research is to compare and analyze the characteristics of horizontal and vertical structures of linear generator for bladeless wind power systems. The proposed topology will be analyzed using magnetic energy by equivalent magnetic circuit method, and then it has been compared and evaluated by finite element method. The results of this project will give elaborate information about new generator structures for wind power system and provide insights into the characteristics of bladeless wind power generation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.111-121
• /
• 2006

Recently, many studies have been performed to apply airborne LIDAR data to extracting urban models. In order to model efficiently the man-made objects which are the main components of these urban models, it is important to extract automatically planar patches from the set of the measured three-dimensional points. Although some research has been carried out for their automatic extraction, no method published yet is sufficiently satisfied in terms of the accuracy and completeness of the segmentation results and their computational efficiency. This study thus aimed to developing an efficient approach to automatic segmentation of planar patches from the three-dimensional points acquired by an airborne LIDAR system. The proposed method consists of establishing adjacency between three-dimensional points, grouping small number of points into seed patches, and growing the seed patches into surface patches. The core features of this method are to improve the segmentation results by employing the variable threshold value repeatedly updated through a statistical analysis during the patch growing process, and to achieve high computational efficiency using priority heaps and sequential least squares adjustment. The proposed method was applied to real LIDAR data to evaluate the performance. Using the proposed method, LIDAR data composed of huge number of three dimensional points can be converted into a set of surface patches which are more explicit and robust descriptions. This intermediate converting process can be effectively used to solve object recognition problems such as building extraction.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.8
• /
• pp.534-541
• /
• 2014

This study investigated a method to determine an efficient operating condition for the $UV/H_2O_2$ process. The OH radical scavenging factor is the most important factor to predict the removal efficiency of the target compound and determine the operating condition of the $UV/H_2O_2$ process. To rapidly and simply measure the scavenging factor, Rhodamine B (RhB) was selected as a probe compound. Its reliability was verified by comparing it with a typical probe compound (para-chlorobenzoic acid, pCBA); the difference between RhB and pCBA was only 1.1%. In a prediction test for the removal of Ibuprofen, the RhB method also shows a high reliability with an error rate of about 5% between the experimental result and the model prediction using the measured scavenging factor. In the monitoring result, the scavenging factor in the influent water of the $UV/H_2O_2$ pilot plant was changed up to 200% for about 8 months, suggesting that the required UV dose could be increased about 1.7 times to achieve 90% caffeine removal. These results show the importance of the scavenging factor measurement in the $UV/H_2O_2$ process, and the operating condition could simply be determined from the scavenging factor, absorbance, and information pertaining to the target compound.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.131-140
• /
• 2013

This paper deals with the design and implementation of an interface for interoperation between DiskSim, a well-known disk simulator, and a system-level simulator based on DEVSim++. Such inter-operational simulation aims at evaluation of an overall performance of storage systems which consist of multiple computer nodes with a variety of I/O level specifications. A well-known system-level simulation framework, DEVSim++ environment is based on the DEVS formalism, which provides a sound semantics of modular and hierarchical modeling methodology at the discrete event systems level such as multi-node computer systems. For maintainability we assume that there is no change of the source codes for two heterogeneous simulation engines. Thus, we adopt a notion of simulators interoperation in which there should be a means to synchronize simulation times as well as to exchange messages between simulators. As an interface for such interoperation DiskSimManager is designed and implemented. Various experiments, comparing the results of the standalone DiskSim simulation and the interoperation simulation using the proposed interface of DiskSimManager, proved that DiskSimManager works correctly as an interface for interoperation between DEVSim++ and DiskSim.