• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.1-7
• /
• 1989

This study was performed to obtain the optimal condition that hydrolyzed exploded pine(Pinus densiflora), oak(Quercus serrata) and birch wood(Betula platyphylla var. japonica) by using sulfuric acid. The results obtained were summarized as follows: In hydrolysis of wood meal with sulfuric acid. maximum yield of sugar appeared that pine was 12 hours. oak and birch were 24 hours with 65% sulfuric acid. Futhermore, when wood meal and exploded woods were hydrolyzed with 65% sulfuric acid at $23^{\circ}C$ for 6 hours(primary hydrolysis), diluted to 3% and hydrolyzed again at $100^{\circ}C$ for 2 hours(secondary hydrolysis), the maximum sugar yield of wood meals were 6 hours. those of higher steam exploded pine wood was 3 hours. of lower steam exploded oak and birch woods were 6 hours. The sugar analyses of exploded wood showed that the amount of arabinose and xylose residue rapidly decreased. content of nemicelluose decreased with increase of steaming time and pressure.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.79-85
• /
• 1990

Traditional complex joints have used to a wide variety of wooden furniture construction. Dowel joint is the most popular joint s. However design of this joint to meet specified service condition has been hampered by a lack of proven design formulas which can be use to predict their strength. The object of this study is to investigate the withdrawal strength and effect of dowel diameters in wood and wood based materials. The obtained results were as follows; 1. The relationship between withdrawal strength and dowel diameter is found to be linear. 2. Withdrawal strength of medium density fiberboard and Sepetir in end-to-side joints is superior to Antiaris, particleboard and plywood. 3. In end-to-end joints, withdrawal strength of medium density fiberboard is the most superior joint. but Sepetir. Antiaris and plywood have similarly strength and particleboard is inferiority. 4. Withdrawal strength in end-to-end joints of Antiaris and plywood is higher than in end-ta-side joints. But in end-to-end joints of Sepetir. medium density fiberboard and particleboard is similarity in end-to-side joints.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.45-51
• /
• 1989

A major problem in the enzymatic hydrolysis of lignocellulosic substrates is the very strong bonding of cellulase to lignin and even cellulose in the hydrolysis residues. This phenomenon inhibits recycle of the cellulase which is a major expense of the enzymatic hydrolysis process. In this paper, autohydrolyzed wood was delignified by two-stage with a 0.3% Na OH extraction and oxygen-alkali bleaching and was subjected to enzymatic hydrolysis with cellulase. Also, an improved almost quantitative recycle process of cellulase enzyme was discussed. In enzyme recovery by affinity method. the first recycling showed relatively high hydrolysis rate of 97.4%. Even at the third recycle. hydrolysis rate was 86.7 percents. In the case of cellulase recovery by ultrafiltration method, first 2 recycling treatments resulted very high hydrolysis rate(97.0-97.7%). Even the third recycling showed about 94.2%. Authoydrolysis of oak wood followed by 2-stage delignification with alkali and oxygen-alkali produced a substrate for enzymatic hydrolysis that allowed almost quantitative recycle of cellulase.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.14-21
• /
• 1991

Steam-exploded woods were delignified by two-stage with a 0.3% NaOH extraction and oxygen-alkali bleaching and were subjected to the enzymatic hydrolysis with cellulase enzyme. Also, an improved almost quantitative recycle process of cellulase enzyme was discussed. In enzyme recovery by affinity method, The first recycling showed relatively high hydrolysis rate of 96.4%. Even at the third recycle, hydrolysis rate was 87.0 percents. In the case of cellulase recovery by ultrafiltration method, first 2 recycling treatments resulted in very high hydrolysis rates, 96.8% and 95.0%, respectively. Even the third recycling showed about 93.6%. Steam-explosion treatment of oak wood followed by 2-stage delignification with alkali and oxygen-alkali produced a excellant substrate for the enzymatic hydrolysis that allowed almost quantitative recycle of cellulase.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.53-60
• /
• 2016

Abiotic-stressed tobacco stems as a non-wooden biomass were analyzed for their chemical characteristics. Light-stressed tobacco stems (LST) have a relatively high nitrogen concentration, much more extractive content, and a similar amount of lignin and higher contents of acid sugars than those of Non stressed tobacco (NST). It also has low cellulose crystallinity and a high degree of condensation. Guaiacyl units having a lower molecular weight distribution consist of rich lignin. Tension stressed tobacco (TST) growth differentiation under tensile stress was significantly different between normal tissue and cell walls, with the exception of the slightly higher cellulose crystallinity observed for.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.148-151
• /
• 2004

This study was carried out to elucidate phylogenetic relationship of a yellow lump, Phellinus linteus by comparing the nuclear ribosomal intergenic spacer (IGS) I region with that of other genera of basidiomycetes retrieved from Genbank. IGS I region of Phellinus linteus was 730 bp long and sequence homology was conserved in the 5' region, in particular $1{\sim}280\;bp$, and decreased in the direction toward the 3' end. ITS region was widely studied in phylogenies related to basidiomycetes, but IGS region was not well understood yet. Our study indicated that IGS region can be a good tool in phylogenetic study of basidiomycetes.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.65-73
• /
• 1989

Steam explosion process is an efficient pretreatment method for sparating and utilizing wood main components has attracted attention in utilization of ligno-cellulosic biomass. In order to obtain the effective pretreatment condition. this study was made explosion apparatus. examined the composition. extraction of exploded wood. Wood chips of pine(Pinus densiflora oak (Quercus serrata) and birch wood (Belula platyphylla var. japonica) were treated with a high pressure steam(20-30 kg/$cm^2$, 2-6 minutes). The results can be summarized as follow; In analysis of exploded wood(EXW). It was found arabinose residues rapidly decreased with increasing of steaming time and pressure. Extractives of EXW with sodium hydroxide increased with increasing of steaming-time and- pressure especially extractives 1% sodium hydroxide has higher than other extracted method extractives of hard wood(oak, birch) has higher than pine wood. In EXW extracted with sodium hydroxide and methanol lignin was partially delignified alkali extraction was more delignified than methanol extraction hardwood than pine wood.

• Journal of Conservation Science
• /
• v.22
• /
• pp.5-14
• /
• 2008

The effect of air pollutants coming from internal museum materials such as wood-based products and cements on metal corrosion have been investigated. The Oddy test and the Chamber test was employed as a corrosion test. The metal pieces after the Oddy test had different corrosion types caused by the internal museum materials. The most effective wood based product was 18T HS(E0) and 9mm plywood(F0,E0). Iron(Fe) and copper(Cu) also bronze of the Chamber test had corrosion caused by Formic acid, Acetic acid, and Acetaldehyde. The packing materials in high humidity had caused more corrosion on the surface of the metal pieces than in low humidity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1612-1617
• /
• 2003

Synchrotron X-ray micro imaging technique was employed to non-invasively monitor the water flow inside xylem vessels in a bamboo leaf. The phase contrast X-ray images clearly visualized plant anatomy and the rise of a water front inside the vessels. Consecutive X-ray images taken for 60 seconds revealed water rise kinetics against gravity in the xylem of a cut dry leaf taken from a bamboo tree. For the first time, traces of water rise, variation of contact angle between water and xylem wall as well as the internal structure of xylem were obtained. In xylem vessels, a repeating flow pattern has a typical flow velocity of 30.7$\mu\textrm{m}$/s and faster flow is established intermittently. It is concluded that the transmission type of X-ray micro imaging can be used as a powerful tool to investigate the ascent of sap in the xylem vessels at a resolution higher than that of MRI.