• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.9-16
• /
• 2004

The purpose of this study is to examine the algorithm of ship collision avoidance system and to improve its performance. The study on the algorithm of ship collision avoidance system have been carried out by many researchers. We can divide the study according to the adopted theory into two category such as 'collision risk calculation method' and 'risk area method'. It is not so difficult to find heir merit and demerit in the respective method. This study suggested newly modified model, which can overcome a limit in the two method. The suggested model is based on collision risk calculation method and suggests how to solve the threshold value problem, that is, one of the unsolved issues in collision risk calculation method. To solve that problem this study proposed new system under which the users can select appropriate threshold value according to environments such as traffic situations and weathers conditions. Simulation results of new model is schematized using 'risk area method'to examine the relationships between the two method. In addition, in case of 'collision risk method', when TCPA and DCPA are used to determine collision risk, a problem happens, that is, two ships become too close in their stem area, therefore, partial function of 'risk area method'is adopted to solve the problem in suggested model.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.51-58
• /
• 2004

Due to the changes in market place, new business types(e.g. e-business} have been rapidly emerged and increased. However, those new business types have not much been emerged in port and logistics related industries, and adoption rate of e-business in this area is very low, compared to other industries. Thus, to promote e-business in this area, many policies have been studied. However, most of previous studies have not been based on industrial structure, and results of these studies have mostly been case by case. Further, there have been no research based on the related theories. As a result, despite many of research and project for shipping and port related e-business, prominent achievements in this area have never to be presented. For these reasons, it am be stated that, first of all, basic studies related to new business types in shipping and port are needed, and then, various policies based on results of those basic studies should be discussed. The aim of this study is to classify business types existed (or expected) in a port related industry, ship bunkering. This taxonomy was based on theories related to business layer(BL) and value chain(VC), and these BL and VC combination enabled to acquire all possible business types.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.557-564
• /
• 2006

Information is used effectively and contributes in profit creation and not only support management judgment quick but important resource to be possible recycled. The recent information systems improve enterprise's competitive power by reflection of user's various requirements and becoming big and complex for adaptation of rapidly circumstance change. Also it is trend that importance of information quality is emphasized gradually. The biggest problem in user requirement that is based on low quality data support. In case of business management is achieved by low quality information, company can not help dropping their competitive power such as company's strategy establishment, strategy achievement and management concentration breakup against competitor. Information of low quality increase time and expense to improve inaccurate data or revise and it is hard to accept correct information from specific situation. To solve these problems, we have to gain high quality data through definite comprehension, data management system establishment, and systematic data management achievement etc. Up to now, information quality and connected study were developed partially, but systematic methodology of information quality management's whole condition was not existed. Therefore, in this paper can show you how to extract process for information quality management & related evaluate factor with CMM (Capacity Maturity Mode]) 5 steps that is information warranty of quality process step. This paper whishes to contributes in competitive company or organization activity through information quality improvement management process.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.451-460
• /
• 2005

We present a methodology to design energy-efficient data paths using FPGAs. Our methodology integrates domain specific modeling, coarse-grained performance evaluation, design space exploration, and low-level simulation to understand the tradeoffs between energy, latency, and area. The domain specific modeling technique defines a high-level model by identifying various components and parameters specific to a domain that affect the system-wide energy dissipation. A domain is a family of architectures and corresponding algorithms for a given application kernel. The high-level model also consists of functions for estimating energy, latency, and area that facilitate tradeoff analysis. Design space exploration(DSE) analyzes the design space defined by the domain and selects a set of designs. Low-level simulations are used for accurate performance estimation for the designs selected by the DSE and also for final design selection We illustrate our methodology using a family of architectures and algorithms for matrix multiplication. The designs identified by our methodology demonstrate tradeoffs among energy, latency, and area. We compare our designs with a vendor specified matrix multiplication kernel to demonstrate the effectiveness of our methodology. To illustrate the effectiveness of our methodology, we used average power density(E/AT), energy/(area x latency), as themetric for comparison. For various problem sizes, designs obtained using our methodology are on average $25\%$ superior with respect to the E/AT performance metric, compared with the state-of-the-art designs by Xilinx. We also discuss the implementation of our methodology using the MILAN framework.

• The KIPS Transactions:PartD
• /
• v.12D no.4 s.100
• /
• pp.589-600
• /
• 2005

Application developers need effective reuseable methodology to meet rapidly changes and variety of users requirements. Product Line and CBD(Component Based Development) offer the great benefits on quality and productivity for developing the software that is mainly associate with reusable architectures and components in a specific domain and rapidly changing environments. Product line can dynamically focus on the commonality and variety feature model among the products. The product line uses the feature modeling for discovering, analyzing, and mediating interactions between products. Reusable architectures include many variety plans and mechanisms. In case of those architecture are use in product version for a long time, It is very important in architecture product line context for product line design phase. Application developer need to identify the proper location of architecture changing for variety expression. It is lack of specific variety managements to design the product line architecture until nowdays. In this paper, we define various variety types to identify the proper location of architecture changing for variety expression and to design the reusable architecture. We also propose architecture variety on feature model and describe variety expression on component relations. We implemented the web learning system based on the methodology. We finally describe how these methodology may assist in increasing the efficiency, reusability, productivity and quality to develop an application. In the future, we are going to apply the methodology into various domain and suggest international and domestic's standardization.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.1
• /
• pp.12-27
• /
• 2004

The contamination pattern of indoor air was simulated when groundwater dissolving benzene was used for household activities. Indoor exposure scenario consisted of inhalation, ingestion, and dermal absorption. Physiologically based pharmacokinetic (PBPK) model was used to analyze how benzene exposed to human body was distributed in internal organs. Main exposure pathways contributing total internal dose were inhalation and ingestion while the contribution of dermal absorption was very small. Man showed higher exposure rate than woman due to his higher breath rate. For a short-term exposure, benzene concentration in venous blood of SPT, RPT and liver changed rapidly while slowly did in venous blood of adipose tissue at a low concentration. For a long-term exposure, woman accumulated about 2.1 times higher than man. Most of benzene exposed to human body was removed by exhalation and metabolism at lung and liver, respectively. For inhalation and ingestion, the benzene removals by exhalation were 69.8 and 48.4%, respectively. Relative importance of removal mechanism was different according to the inflow displacement of benzene. The results obtained from this study would help understand exposure, distribution, and removal phenomena and make plans for the reduction of the health risk associated with the contaminated groundwater by various organic compounds.

• Communications of Mathematical Education
• /
• v.32 no.2
• /
• pp.225-244
• /
• 2018

Problem solving and its mathematical applications have been increasingly emphasized in school mathematics over the past years. Recently it is recommended that mathematical applications and modelling situations be incorporated into the secondary school curriculum. Many researchers on the approach have been conducted in Korea. This study is planning to investigate and establish the meaning of mathematical modelling and model, mathematical modelling process. And also it does the properties of problem situations introduced and dealt with in mathematical modelling activity. To accomplish this, this study is based on the analysis and comparison of those 24 articles. They are ones which have been published from 2007 to 2017 and are included in the five types of publication. Prior to this study, the previous study was conduct in 2007 with the same purpose. Namely, by the subject of 11 articles and 22 master dissertations published domestically from 1991 to 2005, the analytic and explorative study on the mathematical modelling and its understanding had been conducted.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.148-148
• /
• 2000

지금까지 반도체 표면에 대한 연구는 주로 (1000, (111) 표면 등 낮은 밀러 지표를 가진 표면에 대해 이루어져 왔다. 이에 반해 밀러 지표가 높은 Si 면은 불안정하고, 가열하면 다른 표면, 즉 지표가 낮은 면으로 재배열하는 경향이 있는 것으로 알려져 있는데 아직 이들 높은 밀러 지표를 가진 표면에 대한 연구는 미미한 상태이다. 그러나, Si(113)면은 밀러 지표가 높으면서도 안정하기 때문에 Si(113)의 구조를 정확하게 알 수 있다면 밀러 지표가 낮은 Si 표면이 안정한 이유를 이해할 수 있을 것이다. 따라서 본 연구에서는 TOF-CAICISS 장치(Time of Flight - CoAxial Impact Collision Ion Scattering Spectroscopy) 장비와 RHEED(Reflection High Energy Electron Diffrction)를 이용하여 Si(113) 표면의 구조와 Si(113) 표면의 온도에 따른 구조 변화를 관찰하였다. TOF-CAICISS 실험결과를 보면 (3$\times$2)에서 (3$\times$1)으로 상변환하면서 Si(113) 표면에 오각형을 이루는 dimer 원자들과 adatom 원자들간의 높이차가 작아짐을 알 수 있다. RHEED 실험결과와 전산 모사 결과로부터 상온에서 Si(113)(3$\times$2) 구조를 가지다가 45$0^{\circ}C$~50$0^{\circ}C$에서 Si(113) (3$\times$1) 구조로 상변환한다는 것을 알 수 있다. 그러나, 아직 상전이 메카니즘은 명확하게 밝혀지지 않았다. 실험결과를 전산 모사와 비교함으로써 Si(113) 표면에 [33]방향으로 이온빔을 입사시켰을 경우 dabrowski 모델과 Ranke AI 모델이 적합하지 않다는 것을 알 수 있다./TEX>, shower head의 온도는 $65^{\circ}C$로 설정하였다. 증착된 Cu 박막은 SEM, XRD, AFM를 통해 제작된 박막의 특성을 비교.분석하였다. 초기 plasma 처리를 한 경우에는 그림 1에서와 같이 현저히 증가한 초기 구리 입자들이 관측되었으며, 이는 도상 표면에 활성화된 catalytic site의 증가에 기인한다고 보여진다. 이러한 특성은 Cu films의 성장률을 향상시키고, 또한 voids를 줄여 전기적 성질 및 surface morphology를 향상시키는 것으로 나타났다. 결과 필름의 잔류 응력과 biaxial elastic modulus는 필름의 두께가 감소함에 따라 감소하는 경향을 나타냈으며, 같은 두께의 필름인 경우, 식각 깊이에 따른 biaxial elastic modulus 의 변화를 통해 최적의 식각 깊이를 알 수 있었다.도의 값을 나타내었으며 X-선 회절 data로부터 분석한 박막의 변형은 증온도에 따라 7.2%에서 0.04%로 감소하였고 이 이경향은 유전손실은 감소경향과 일치하였다.는 현저하게 향상되었다. 그 원인은 SB power의 인가에 의해 활성화된 precursor 분자들이 큰 에너지를 가지고 기판에 유입되어 치밀한 박막이 형성되었기 때문으로 사료된다.을수 있었다.보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적화에 의한 기능성 나노 입자 제조 기술을 확립하고 2차 오염 발생원인 유기계 항균제를 무기계 항균제로 대체할 수 있다.

• Communications of Mathematical Education
• /
• v.29 no.4
• /
• pp.573-588
• /
• 2015

In this paper, we introduce development process and application of a simple and effective model of a statistics laboratory using open source software R, one of leading language and environment for statistical computing and graphics. This model consists of HTML files, including Sage cells, video lectures and enough internet resources. Users do not have to install statistical softwares to run their code. Clicking 'evaluate' button in the web page displays the result that is calculated through cloud-computing environment. Hence, with any type of mobile equipment and internet, learners can freely practice statistical concepts and theorems via various examples with sample R (or Sage) codes which were given, while instructors can easily design and modify it for his/her lectures, only gathering many existing resources and editing HTML file. This will be a resonable model of laboratory for studying statistics. This model with bunch of provided materials will reduce the time and effort needed for R-beginners to be acquainted with and understand R language and also stimulate beginners' interest in statistics. We introduce this interactive statistical laboratory as an useful model for beginners to learn basic statistical concepts and R.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.265-282
• /
• 2008

Based on the site characterization works in a low and intermediate level waste(LILW) repository site, the numerical simulations for groundwater flow were carried out in order to understand the groundwater flow system of repository site. To accomplish the groundwater flow modeling in the repository site, the discrete fracture network(DFN) model was constructed using the characteristics of fracture zones and background fractures. At result, the total 10 different hydraulic conductivity(K) fields were obtained from DFN model stochastically and K distributions of constructed mesh were inputted into the 10 cases of groundwater flow simulations in FEFLOW. From the total 10 numerical simulation results, the simulated groundwater levels were strongly governed by topography and the groundwater fluxes were governed by locally existed high permeable fracture zones in repository depth. Especially, the groundwater table was predicted to have several tens meters below the groundwater table compared with the undisturbed condition around disposal silo after construction of underground facilities. After closure of disposal facilities, the groundwater level would be almost recovered within 1 year and have a tendency to keep a steady state of groundwater level in 2 year.