• Journal of the Korean Data and Information Science Society
• /
• v.20 no.1
• /
• pp.125-137
• /
• 2009

Smart card has a small sized micro computer chip. This chip contains processor, RAM, ROM, clock, bus system and crypto-co-processor. Hence it is more expensive, complicated and secure chip compared with RFID tag. The main application area of smart card is e-banking and secure communications. There are two kinds of smart card platforms; open platform and closed one. Java card is the most popular open platform because of its security, platform independency, fast developing cycle. However, the speed of Java card is slower than other ones, hence there have been hot research topics to improve the performance of Java card. In this paper, we propose an efficient transaction buffer management to improve the performance of Java card. The experimental result shows the advantage of our method.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.286-295
• /
• 2004

생물학적으로 의미 있는 결과를 도출하기 위해서는 많은 실험 데이터가 필요하다. 최근에는 마이크로 어레이 실험 기술이 발달함에 따라 대량의 데이터를 얻을 수 있게 되었고, 이로 인해서 데이터를 체계적으로 관리하고 필요한 정보를 습득할 수 있는 시스템이 필요하게 되었다. LIMS(Laboratory Information Management System) 는 이러한 요구 조건을 충족시키기 위한 시스템으로 기존의 파일 시스템에 의존해서 비효율적으로 실험 데이터를 관리해 오던 것을 체계적이고 효율적으로 관리해 주기 위한 시스템이다. 대량의 유전자 발현 데이터의 생산은 유전자의 조절 네트워크 예측을 가능하게 하였다. 유전자간의 상호 작용을 분석하는 것은 세포의 활동을 이해하는데 매우 중요한 요소라고 할 수 있다. 본 논문에서는 기존의 LIMS 기능과 유전자 조절 네트워크 분석 시스템을 통합하여 사용자가 쉽게 데이터를 공유 및 습득할 수 있으며 편리한 사용자 인터페이스를 이용하여 컴퓨터에 익숙하지 않은 실험들도 쉽게 사용할 수 있는 GELIM(an Integrated system with GEnetic network analyzer and LIMs) 을 소개한다.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.2
• /
• pp.41-47
• /
• 1990

최근 열에너지를 기계에너지로 변환이 가능한 신소재인 형상기억합금으로 제작된 새로운 형태의 actuator를 이용한 해저로봇의 개발에 관하여 많은 연구들이 행하고 있다. 저자들은 로봇의 모양을 실제 동물의 형태인 "게" 모양으로 하고, 로봇을 구동시키는 게의 다리의 모든 연결부분의 인공근육을 Ni-Ti계 형상기억합금 스프링 또는 와이어로 구성되어져 있으며, 마이크로 컴퓨터에 의하여 구동이 자유로이 조절이 가능한 게 형태의 모양 로봇을 실제의 1/20크기로 제작하였다. 이 로봇의 특징은 구조가 간단하고, 고강도, 고내식성 그리고 부드럽고 자유롭게 3차원적 동작이 가능하다는 것을 들 수 있다. 해저 로봇의 최종목표는 심해자원의 탐사 및 채굴이 이용하는 것이다. 따라서 본 연구에서는 그 가능성 및 기술적 문제 그리고 미래의 이러한 형상기억합금 로봇에 의한 심해자원 탐사를 위한 국제적인 협력의 필요성에 대하여 연구 검토하고자 한다. 검토하고자 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.3
• /
• pp.61-68
• /
• 1983

In this paper various aspects of statistical maltiplexing of data signs have been investigated. A queueing model with finite waiting room and batch poisson arrivals is studied assuming that data signals are transmitted at a constant rate. Using traffic intensity and average burst length as parameters, overflow probabilities and expected queueing delay due to buffering are obtained. Also, a real system model of a statistical multiplexer that can be directly used in micro-programmed hardware realization is proposed. To examine the performance of the system, computer simulation has been done at various conditions. The results obtained can be used in designing a buffer efficiently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.78-83
• /
• 2002

Reachability analysis of finite state machines is very useful for many computer-aided design applications such as communication protocol or microprecessor design. We present new techniques to improve approximate reachability analysis. The key idea is to used an iterative approximate reachability analysis technique in which don't care sets derived from previous iterations are used to improve the approximation in subsequent iterations. Experimental results show that the new techniques can improve reachability analysis significantly compared to existing analysis techniques.

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.11
• /
• pp.142-144
• /
• 1991

In this study, we have developed 64 channel computerized cardiac mapping system using micro-computer for basic research of electrophysiology and electrical propagation in cardiac arrhythmias. The significant problems of this study are the simultaneous acquisition of large amount data at 64 sites, the need of accurate and rapid analysis, and the effective display of the analyzed data. To solve these problems, we made 64 channel signal pre-processing board in order to amplify and filter the raw signals. And the software for cardiac isochronous mapping which were presented immediately via computer-generated graphics has been developed. This system is expected to enable us to study pathophysiology of cardiac arrhythmia and to improve the results of diagnosis and surgical treatment for cardiac arrhythmia.

• Journal of Biosystems Engineering
• /
• v.14 no.4
• /
• pp.221-228
• /
• 1989

A data acquisition system was designed to measure the forces on a rolling coulter in three coordinated directions, angular velocity of the coulter and travel speed of a soil bin. The data acquisition system consisted of a dynamometer, speed transducers, a signal conditioner, an inter-face board, an Aim-65 microcomputer and a digital data recorder. Strain gages were attached on the surface of the dynamometer and connected to form three Wheatstone bridges, which measure the draft force, the vertical force and the side force on the coulter. An interaction among three dimensional forces was found during the calibration. A matrix procedure was used to correct the forces for this interaction. Rotary shaft encoders were mounted on the coulter and on the soil bin drive to measure the angular velocity of the coulter and the travel speed of the soil bin. The angular velocity and the travel speed were computed by counting the number of pulse signals from the rotary shaft encoders every 0.2 second. The digital signals from the rotary shaft encoders were connected to counters and the analog signals from the dynamometer, after passing through the signal conditioner, were connected to the A/D converter. The microcomputer programs, written in assembly language, were developed to read signals from the transducers, convert them to actual unit, display them upon request and record them on a sigital tape every 0.2 second.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1071-1083
• /
• 1991

In this paper, we describe the design and realization of optical preamplifier with InGaAs APD and GaAs MESFET. Optical preamplifier which is three stage trans-impedance circuit is analyzed in detail and realized in microstrip circuits. With the kmowledge of the InGaAs, GaAs MESFET and BJT, the performance of the optical is predicted by computer simulation and the theoretical predictions are compared with the experimental results. The designed hybrid MIC optical preamplifier exhibits a bandwith of 380MHz and a receiver sensitivity of -40. 6dBm at $1.55{\mu}m$ wavelength when operating at 565Mb/s with BER of $10^{-9}$.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.7
• /
• pp.524-538
• /
• 1989

A new bilateral series resonant inverter and its control method are proposed. The proposed inverter consists of zero current switched cycloconverter. Output voltage is regulated by modulating the average magnitude of resonant current sinusoidally. Cycloconverter synthesizes low frequency output voltage from high frequency resonant current pulses. In the proposed inverter, bidirectional power flow in possible and isolation transformer is miniaturized. The proposed control method is verified through simulation and experiment. The proposed inverter will satisfy the small size and low cost requirements of small Uninterruptible Power Supply (UPS) of less than 1 KVA suitable for micro-computers and electronic equipments used in office and home automation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.24-28
• /
• 1985

In this paper, the cyclic product codes which are capable of correcting random erros and burst errors simultaneously have been designed and constructed. First, the procedure for product of two cyclic codes is shown and thin the encoder and decoder system using the (7,4) cyclic Hamming code and the (3,1) cyclic code is implemented. The micro-computer is used for experiment and the system consists of encoder, decoder and interface circuits. The encoder of cyclic product code is implemented by interlacing encoders while the decoder is implemented by cascading decoders that interlace error trapping decoders. In conclusion, cyclic product codas are easily decodable and are capable of correcting four random errors and eight-burst errors. Better performance is obtained with low error rate.