• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.68-73
• /
• 2002

One widely-used technique by which network attackers attain anonymity and complicate their apprehension is by employing stepping stones: they launch attacks not from their own computer but from intermediary hosts that they previously compromised. We develop an efficient algorithm for detecting stepping stones by monitoring a site's Internet access link. The algorithm is based on the distinctive characteristics(packet size, timing) of interactive traffic, and not on connection contents, and hence can be used to find stepping stones even when the traffic is encrypted. We evaluate the algorithm on large Internet access traces and find that it Performs quite well. However, the success of the algorithm is tempered by the discovery that large sites have many users who routinely traverse stepping stones for a variety of legitimate reasons.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.128-131
• /
• 2006

IPv6 프로토콜은 현재 인터넷 프로토콜로 사용되고 있는 IPv4 프로토콜이 가지고 있는 주소 부족 문제, 미흡한 QoS의 제공, 다양한 보안 문제 등을 해결하도록 설계된 차세대 인터넷 표준이다. IPv4에서 IPv6로의 전환이 이루어지고 있는 과정이지만, 아직까지 IPv6가 많이 사용되고 있지는 않고 있어 IPv6 트래픽 모니터링 도구 및 침입대응 장비도 많이 나와 있지 않다. 그러나, IPv6 네트워크가 점진적으로 등장하고 전환이 됨에 따라 IPv6에서 발생할 수 있는 각종 인터넷 침해사고에 대한 대비가 필요하다. 이미 IPv6 프로토콜의 허점을 이용한 서비스 거부공격, 디폴트 라우터 위장공격 등 IPv4에서 발생했던 이상트래픽, IPv6 확장헤더를 이용한 이상트래픽 및 IPv6-over-IPv4 터널링 등의 이상트래픽 발생이 보고되고 있다. 이에 본 논문은 IPv6 프로토콜에서 발생할 수 있는 이상트래픽에 대해 살펴보고, 이러한 이상트래픽의 탐지를 위해 IETF 표준인 IPFIX 템플릿을 이상 트래픽 탐지가 가능하게 제안한다. 제안된 IPFIX 플로우 메시지를 이용하여 간단하게 IPv6 이상 트래픽을 분류하는 방법도 제시하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.489-489
• /
• 2013

AF 코팅은 유리나 플라스틱과 같은 기재 표면을 특수 처리하여 지문과 같은 오염물질의 부착방지와 오염물질이 부착되더라도 쉽게 제거 가능하도록 하는 기술이다. 전자, 자동차, 건축, 섬유, 철강분야 등에 활용 가능한 중요기술로 박막의 발수 발유 기능을 부여하는 표면처리 기술이고, 코팅방법에는 진공증착, 스핀코팅, 딥코팅, 플로우 코팅, 스프레이 코팅 등이 있으며, 경화 방법이나 접촉각 등의 특성이 반영된다. 터치패널 등의 지문부착방지 기술은 불소계와 비불소계 재료로 구분할 수 있지만 지문을 쉽게 지울 수 있고, 오염 방지 기능과 내구성이 있으며, 우수한 광학특성을 유지하는 것이 과제라 할 수 있다. 그리고 항균성을 부여하는 기술도 개발되고 있다. 이런 터치패널의 강화유리에 AF 코팅한 제품은 핸드폰 글래스에 처음 적용하면서부터 실생활에 도입이 시작되고 있다. 이러한 AF 코팅을 스퍼터링 법을 이용하여 증착 시켰다. 기존에는 E-beam을 이용한 증착 방식이 주를 이루었지만, 스퍼터링 법을 이용함으로써 박막의 균일화 및 대량생산이 가능해졌다. 따라서 이 연구에서는 기존의 E-beam 방식과 sputtering 공정 중 ion source에 의한 전처리의 유무에 따른 박막의 특성을 비교하였다. 내부식성, 내마모성 시험을 거친 후, 접촉각을 측정하여 알아보았으며, 박막의 건전성 및 균일성은 FE-SEM을 이용하여 관찰하였다. 실험용 장비가 아닌 실제 생산장비인 직경 1,400 파이의 장비를 이용하여 증착하였으며 염수분무 및 내마모 시험 후, 기존 접촉각의 ${\pm}5^{\circ}$ 내외임을 확인 할 수 있었고, 박막의 건전성 또한 뛰어남을 알 수 있었다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.613-618
• /
• 2023

In this paper, a monitoring program that can automatically determine whether a patient admitted to an isolation room acts out of a stable state through a screen photographed in real time is described. The motion recognition model of this program was built by learning through transfer learning. 900 images were used for the three movements, and this program was developed for the web to support all environments. The model was determined with high accuracy to determine the state of the subject hospitalized in the isolation room, and can be applied by applying it to the existing isolation room monitoring system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.161-168
• /
• 2018

High blood pressure is main today's adult disease and existing blood pressure gauge is not possible for real-time blood pressure measurement and remote monitoring. But real-time blood pressure monitoring u-healthcare system makes effect health management. In my paper, for monitoring real-time blood pressure, an architecture of real-time blood pressure monitoring system which consisted of wrist type-blood pressure measurement, smart-phone and u-healthcare server is presented. And the analog circuit architecture which is major core function for pulse wave detection and digital hardware architecture for wrist type-blood pressure measurement is presented. Also for software development to operate this hardware system, UML analysis method and flowcharts and screen design for this software design are showed. Therefore such design method in my paper is expected to be useful for real-time blood pressure monitoring u-healthcare system implementation.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.113-124
• /
• 2005

The work of investigation in the laboratory medicine includes various kinds of investigations and microbes and it is too complicated to draw needed results in time. So, we aim to improve work performance of the laboratory medicine. For this study, we implemented the scheduling system in microbe investigation using agent environment and the workflow management system to manage the schedule of investigation, and the query system to check the schedule. And preliminary report and final report of microbe investigation can be announced automatically using agent. The scheduling system implemented could identify the lack or waste of resources and thus enable efficient management and distribution of resources. The query system could check the schedule and retrieve the Processing status in short time, enabled the automated report, and reduced possible interrupts and the delay of work that can be occurred in confirming process. It also enables users to access from local and remote sites. Also, this system can reduce the conflicts among People that may occur in unexpected situations because it enables doctors to confirm those situations such as the malfunction of instrument and the lack of agar or reagent, and the efficiency of work process can be expected.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.90-96
• /
• 2009

The high rising building construction makes increasing the requirement of high strength concrete. Especially, the workability analysis is related with dispersion of admixture such as SF for improving strength and FA, BS for reducing construction cost and improving durability of Ultra High Strength Concrete which has over 100 MPa of compressive strength is very important. Precisely, decreases dispersion because of lumping situation of each admixture and it causes the workability of admixture is decreased. Therefore, the workability of cement paste is tested for analyze effects of pre-mixed cement for solving those problems with it to this research. The summary of the results are like below. First of all, OBS is increasing workability more than OFS. This result causes that the glassy surface of BS in the OBS is increasing workability and the absorption of admixture of FA in the OFS is decreasing workability. In the case of mixing methods, pre-mixing method is increasing workability more than normal one. This result shows that the normal mixing method is bad dispersion of binders. The other side, the pre-mixing method is good. Furthermore, depending on the mixing time, according to the increasing mixing time such as 30, 60, and 120 seconds, the dispersion of binders and workability turns better.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.2
• /
• pp.38-46
• /
• 2001

This paper presents a new multiprocessor system and corresponding scheduling algorithm that can be applied for implementation of fine grain DSP algorithms such as digital filters. The newly proposed system uses one or more shared buses as the basic interconnection network between processors, and fixed amount of clock-skew is maintained between instruction execution of processors. This system not only can handle the interprocessor communications very efficiently but also can explicitly incorporate the interprocessor communication delay time into the multiprocessor scheduling model. This paper also presents a new scheduling strategy for implementing digital filters expressed in fully-specified flow graphs on the proposed system. The simulation result shows that well-known digital filters can be implemented on proposed multiprocessor in which the implementation satisfies the iteration period bound.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.137-150
• /
• 2015

This study investigated the influence of Entrepreneurship, Start-up Competency on Entrepreneurial Satisfaction and the moderating effect of Flow experience. The goal of this investigation is to empirically prove that despite the benefits of educational and financial support, mentoring and consulting which selected applicants received as a part of supporting business for start-up companies provided by national and local government and public organizations, there is a gap between individual entrepreneurs' satisfaction after actual foundation of the company. For the purpose of this investigation, data was collected through a survey with 320 entrepreneurs who were beneficiaries of government's supporting business for start-up companies and have founded their companies less than 5 years ago. For entrepreneurship variables, three factors of innovativeness, proactiveness and risk-taking were reviewed, and also reviewed the three variables network capability, market orientation and marketing capacity as Start-up competency. The collected data was used to perform a multiple regression analysis, and the moderating effect of flow experience was analysed using moderated regression analysis. The result of analysis shows that innovativeness, proactiveness and risk-taking of entrepreneurship positively affected the entrepreneurial satisfaction, and network capability, market orientation and marketing capability also positively affected the entrepreneurial satisfaction. As a result of analysing the moderating effect of flow experience, it appeared that there is a positive moderating effect between entrepreneurship, start-up competency, and the entrepreneurial satisfaction. This result concludes that evaluation items of entrepreneurship and start-up competency as applicant selecting criteria in supporting business for start-up companies, are valid. It is also concluded that start-up supports such as education, funds and consulting are also important, but it is necessary to make changes such as construction of start-up ecosystem and reinforcement of networking support, so that entrepreneurs can have the flow experience themselves in the process after founding a company.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.745-747
• /
• 1999

인터넷이 급성장함에 따라 사용자의 더 나은 서비스에 대한 요구 역시 급증하였다. 네트웍 연구가들은 제한된 네트웍 자원 하에서 오류제어, 흐름 제어, 그리고 폭주 제어를 적절히 수행함으로써 전송 품질을 향상시키는 방법들에 대해 연구해 오고 있다. 그러나 인터넷 연구의 가장 큰 난점 중 하나가 인터넷에는 네트웍의 상태를 모니터링할 수 있는 근간이 되는 방법이 기본적으로 지원되고 있지 않다는 점이고 따라서 네트웍의 구조와 상태, 플로우의 흐름 및 통계 등에 대한 기본 자료가 부족한 실정이다. 오류 제어나 흐름 제어, 그리고 폭주제어 기술을 연구할 때 가장 필요한 자료중의 하나가 네트웍 토폴로지이다. 그 중에서도 송신자와 수신자 사이의 거리 정보인 Network Diameter가 있다. 기존 연구에서는 연구자 임의로 이 값을 할당하거나 혹은 특정 실험실에서만 유효한 Network Diameter가 있다. 기존 연구에서는 연구자 임의로 이 값을 할당하거나 혹은 특정 실험에서만 유효한 Network Diameter 값을 제시해오고 있었다. 이 논문에서는 이처럼 비객관적이거나 특수값으로만 사용되어 오던 Internet Diameter를 실효 접속에 근거하여 측정하는 알고리즘을 제안하고, KAIST에서 전세계로 나가는 실측 접속 자료로부터 접속 Hop Count의 분포를 측정하며 이를 통해 타 인터넷 연구에 적절한 자료를 제시한다.