• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.100-108
• /
• 2018

This paper describes a design of scalable RSA public-key cryptography processor supporting four key lengths of 512/1,024/2,048/3,072 bits. The modular multiplier that is a core arithmetic block for RSA crypto-system was designed with 32-bit datapath, which is based on the CIOS (Coarsely Integrated Operand Scanning) Montgomery modular multiplication algorithm. The modular exponentiation was implemented by using L-R binary exponentiation algorithm. The scalable RSA crypto-processor was verified by FPGA implementation using Virtex-5 device, and it takes 456,051/3,496347/26,011,947/88,112,770 clock cycles for RSA computation for the key lengths of 512/1,024/2,048/3,072 bits. The RSA crypto-processor synthesized with a $0.18{\mu}m$ CMOS cell library occupies 10,672 gate equivalent (GE) and a memory bank of $6{\times}3,072$ bits. The estimated maximum clock frequency is 147 MHz, and the RSA decryption takes 3.1/23.8/177/599.4 msec for key lengths of 512/1,024/2,048/3,072 bits.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.126-135
• /
• 2014

The Euclidean distance between error probability density functions (EDEP) has been used as a performance criterion for supervised adaptive signal processing in impulsive noise environments. One of the drawbacks of the EDEP algorithm is a heavy computational complexity due to the double summation operations at each iteration time. In this paper, a recursive method to reduce its computational burden in the estimation of the EDEP and its gradient is proposed. For the data block size N, the computational complexity for the estimation of the EDEP and its gradient can be reduced to O(N) by the proposed method, while the conventional estimation method has $O(N^2)$. In the performance test, the proposed EDEP and its gradient estimation yield the same estimation results in the steady state as the conventional block-processing method. The simulation results indicates that the proposed method can be effective in practical adaptive signal processing.

• The KIPS Transactions:PartA
• /
• v.13A no.1 s.98
• /
• pp.11-18
• /
• 2006

In the Internet of various networks, it is difficult to reduce real routing time by just minimizing their hop count. We propose an adaptive proximity route selection method in DHT-based peer-to-peer systems, in which nodes select the nぉe with smallest lookup latency among their routing table entries as a next routing node. Using Q-Routing algorithm and exponential recency-weighted average, each node estimates the total latency and establishes a lookup table. Moreover, without additional overhead, nodes exchange their lookup tables to update their routing tables. Several simulations measuring the lookup latencies and hop-to-hop latency show that our method outperforms the original Chord method as well as CFS' server selection method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1343-1352
• /
• 1992

This paper presents a new and easy method to obtain the Fourier transforms of the n-th order cosine-pulses whose maximum amplitudes are uniform. The new method is focused on deriving a formula which is recursively related following their orders and can be well applied to some numerical solutions. On the other hand, this method also offers more compact procedures in view of analytical solutions than the conventional methods because the results are consist of the sum of two functions which are easily calculated. Especially, the formula can be represented as a complete recursion by the separation of coefficients originated by the authors and the resulting difference equation is given by the sum of the original 'sinc' functions shifted by some symmetrical factors and multiplied by some constants. The constants are easily decided from the binomial coefficients and the shifting factors from the corresponding exponential differences in the expansion of $(a+b)^n$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.17-28
• /
• 2012

In this study, we suggest a method for material property evaluation by dual-triangular pyramidal indenters using the reverse analysis. First, we demonstrated that load-displacement curves of conical and triangular pyramidal indenters are different for the same material. For this reason, an independent research on the triangular pyramidal indenter is needed. From FE indentation analyses on various materials, we then investigated the relationships among material properties, indentation parameters and load-displacement curves. From this, we established property evaluation formula using dual-triangular pyramidal indenters having two different half-included-angles. The approach provides the values of elastic modulus, yield strength and strain-hardening exponent within an average error of 3% for various materials.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.4
• /
• pp.71-87
• /
• 2022

Purpose: This study examines the daylighting design factors of Korean dementia nursing homes, in order to realize a therapeutic environment based on the therapeutic effect of light in the rapidly aging trend with an huge increase in the population of dementia in Korea. Methods: Through literature reviews, this study aims to theoretically examine the therapeutic light environment for the elderly with dementia, derive daylighting design factors of Korean dementia nursing homes, and analyze their detailed design factors. Results: The result of this study can be summarized into two points. The first one is that the daylighting design factors reflected in dementia nursing homes are derived into six factors: building layout, windows, glazing, shading devices, spaces, and interior finishings that determine the availability of daylight. The second one is that the detailed daylighting design factors are shown as primary and secondary detailed design factors, and the main values to be considered when applying these factors into dementia nursing homes are analyzed as maximizing daylight availability, optimization of the possibility of therapeutic view, and anti-glare. Implications: The daylighting design factors will contribute to maximizing the availability of daylight, optimizing the possibility of view, and minimizing the glare in the living spaces of dementia nursing homes in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.79-86
• /
• 1973

In order to investigate the heading responses of naked barleys and their grain yields under the different sowing times in spring sowing at 9 levels and to select the promising variety, present work was carried out with 11 recommended naked barley varieties and 2 newly developed lines for the period of 3 years from 1971 to 1973 at Iri, these results being summarized as follows: 1. Under spring sowing cultures, 'Wanju naked barley' being spring habit showed the highest yields among them. However, Sedohadaka and Bangju being winter habit were also considered as the promising varieties. 2. In the case of sowing the spring type naked barleys in spring the optimum sowing time of barleys at Iri was estimated in the late of February or the early of March. 3. The number of main culm leaves and tillering per hill of 'Wanju naked barley' were not influenced at sowing times. But winter type barleys being sown in spring, they were outstandingly increased in accordance with the sowing time being late, especially after the critical sowing time. 4. In comparison with average days from germinating to heading date under different seasonal sowing at the same variety, 'Wanju naked barley' took 64.4 days to get heading and Kikaihadaka and Hyangchoen gwa, the low spring growing habit varieties, 72-73 days. 5. Young spikelet differentiation stage (length of young spikelet: 0.3-0.5mm) arrived at about 30 days before heading date in comfortable sowing time without regarding spring or winter type. But number of main culms disclosed great differences among them; barleys being high spring type were 4 leaves and low about 6. 6. In the view of morphology, culm length under the different seasonal sowing could not be found out differences in the high spring type barleys, but in the low, it was grately shortened by postponing the sowing time. The barley height of rosette form had no difference at any sowing time.difference at any sowing time.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.73-81
• /
• 2020

Considering the difficulties associated with the creation of deterioration maps for stone cultural heritages, quantitative determination of chemical and biological contaminants in them is still challenging. Hyperspectral image analysis has been proposed to overcome this drawback. In this study, hyperspectral imaging was performed on Stone Buddhas Temple in Four Directions at Gulbulsa Temple Site(Treasure 121), and several surface contaminants were observed. Based on the color and shape, these chemical and biological contaminants were classified into ten categories. Additionally, a method for establishing each class as a reference image was suggested. Simultaneously, with the help of Spectral Angle Mapper algorithm, two classification methods were used to classify the surface contaminants. Method A focused on the region of interest, while method B involved the application of the spectral library prepared from the image. Comparison of the classified images with the reference image revealed that the accuracies and kappa coefficients of methods A and B were 52.07% and 63.61%, and 0.43 and 0.55, respectively. Additionally, misclassified pixels were distributed in the same contamination series.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.89-98
• /
• 2015

This paper provides a robust and non-fragile $H_{\infty}$ controller design algorithm for time-delayed systems with randomly occurring polytopic uncertainties and disturbances. First, we design time-delayed system considering randomly occurring uncertainties and disturbances. Next, The sufficient condition for the existence of robust and non-fragile $H_{\infty}$ controller is presented by LMI(linear matrix inequality) using Lyapunov stability analysis and $H_{\infty}$ performance measure. Since the obtained condition can be expressed as a PLMI(parameterized linear matrix inequality) by changes of variables and Schur complement, all solutions including controller gain, degrees of controller satisfying non-fragility, $H_{\infty}$ norm bound ${\gamma}$ can be calculated simultaneously. Finally, numerical examples are given to illustrate the performance and the effectiveness of the proposed robust and non-fragile $H_{\infty}$ controller compared with the deterministic uncertainty model even though there exists randomly occurring uncertainties, disturbances and time delays.