Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Dual Triangular Pyramidal Indentation Technique Based on FEA Solutions for Material Property Evaluation

유한요소해에 기초한 이중 삼각뿔 압입 물성평가법

  • Received : 2011.04.06
  • Accepted : 2011.12.05
  • Published : 2012.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, we suggest a method for material property evaluation by dual-triangular pyramidal indenters using the reverse analysis. First, we demonstrated that load-displacement curves of conical and triangular pyramidal indenters are different for the same material. For this reason, an independent research on the triangular pyramidal indenter is needed. From FE indentation analyses on various materials, we then investigated the relationships among material properties, indentation parameters and load-displacement curves. From this, we established property evaluation formula using dual-triangular pyramidal indenters having two different half-included-angles. The approach provides the values of elastic modulus, yield strength and strain-hardening exponent within an average error of 3% for various materials.

본 연구에서는 역해석 방법을 통해, 중심각이 서로 다른 두 삼각뿔 압입자를 이용하는 재료물성 평가법을 제안한다. 자기유사성을 갖는 첨단형 압입자를 사용한 압입시험 전산모사시, 동일 압입깊이에 대해 원뿔형 및 삼각뿔 압입자가 주는 하중-변위 곡선들이 다름을 확인했다. 따라서 삼각뿔형 압입자를 이용한 물성평가는 원뿔형 압입자와 별도로 독립적인 연구가 필수적이다. 먼저 다양한 재료들에 대한 삼각뿔 압입 유한요소해석들로 얻은 하중-변위 곡선들의 특징을 살폈다. 이를 토대로 압입자 반각이 다른 두 삼각뿔 압입자를 이용해 유한요소해석으로 얻은 하중-변위곡선들의 회귀분석으로 재료물성치를 얻는 이중 삼각뿔 압입물성평가 알고리듬을 제시했다. 제안된 물성평가법을 이용하면 다양한 재료에 대해 평균오차 3% 이내로 영률 및 항복강도, 변형경화지수의 예측이 가능하다.

Keywords

References

  1. Giannakopoulos, A. E., Larsson, P.-L. and Vestergaard, R., 1994, "Analysis of Vickers Indentation," International Journal of Solids and Structures, Vol. 31, pp. 2679-2708. https://doi.org/10.1016/0020-7683(94)90225-9
  2. Larsson, P. -L., Giannakopoulos, A. E., Soderlund, E., Rowcliffe, D. J. and Vestergaard, R., 1996, "Analysis of Berkovich Indentation," International Journal of Solids and Structures, Vol. 33, pp. 221-248. https://doi.org/10.1016/0020-7683(95)00033-7
  3. Taljat, B., Zacharia, T. and Kosel, F., 1997, "New Analytical Procedure to Determine Stress-Strain Curve from Spherical Indentation Data," International Journal of Solids and Structures, Vol. 35, pp. 4411-4426.
  4. Giannakopoulos, A. E. and Suresh, S., 1999, "Determination of Elastoplastic Properties by Instrumented Sharp Indentation," Scripta Materialia, Vol. 40, pp. 1191-1198. https://doi.org/10.1016/S1359-6462(99)00011-1
  5. Dao, M., Chollacoop, N., Van Vliet, K. J., Venkatesh, T. A. and Suresh, S., 2001, "Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation," Acta Materialia, Vol. 49, pp. 3899-3918. https://doi.org/10.1016/S1359-6454(01)00295-6
  6. Lee, J. H. and Lee, H., 2006, "An Indentation Method Based on FEA for Equi-biaxial Residual Stress Evaluation," Transactions of KSME, Vol. 30, No. 1, pp. 42-51. https://doi.org/10.3795/KSME-A.2006.30.1.042
  7. Lee, J. H., 2006, A Numerical Approach and Experimental Verification of the Indentation Techniques for Material Property and Residual Stress Evaluation, Ph. D. Dissertation, Department of Mechanical Engineering, Sogang University.
  8. Shim, S., Oliver, W. C. and Pharr, G. M., 2007, "A Comparison of 3D Finite Element Simulation for Berkovich and Conical Indentation of Fused Silica," International Journal of Surface Science and Engineering, Vol. 1, pp. 259-273. https://doi.org/10.1504/IJSURFSE.2007.015028
  9. Lee, J. H., Yu, H. S. and Lee, H., 2007, "A Numerical Approach to Indentation Techniques for Thin-film Property Evaluation," Transactions of KSME, Vol. 31, No. 3, pp. 313-321. https://doi.org/10.3795/KSME-A.2007.31.3.313
  10. Xu, Z. -H. and Li, X., 2008, "Effect of Indenter Geometry and Material Properties on the Correction Factor of Sneddon's Relationship for Nanoindentation of Elastic-plastic Materials," Acta Materialia, Vol. 56, pp. 1399-1405. https://doi.org/10.1016/j.actamat.2007.11.030
  11. Swaddiwudhipong, S., Tho. K. K., Liu, Z. S. and Zeng. K., 2005, "Material Characterization Based on Dual Indenters," International Journal of Solids and Structures, Vol. 42, 69 - 83. https://doi.org/10.1016/j.ijsolstr.2004.07.027
  12. Le, M., 2008, "A Computed Study on the Instrumented Sharp Indentations with Dual Indenters," International Journal of Solids and Structures, Vol. 45, 2818 - 2835. https://doi.org/10.1016/j.ijsolstr.2007.12.022
  13. Le, M., 2009, "Materials Characterization by Dual Indenter," International Journal of Solids and Structures, Vol. 46, 2988 - 2998. https://doi.org/10.1016/j.ijsolstr.2009.03.027
  14. Lee, J. H., Kim, T. and Lee, H., 2010, "A Study on Robust Indentation Techniques to Evaluate Elasticplastic Properties of Metals", International Journal of Solids and Structures, Vol. 47, pp. 647-664. https://doi.org/10.1016/j.ijsolstr.2009.11.003
  15. Lee, J. H., Lee, H. and Pharr, G. M., 2005, "A Numerical Approach to Spherical Indentation Techniques for Material Property Evaluation," Journal of the Mechanics and Physics Solid, Vol. 53, pp. 2037- 2069. https://doi.org/10.1016/j.jmps.2005.04.007
  16. Lee, J. H. and Lee, H., 2007, "Enhanced Spherical Indentation Techniques for Property Evaluation," Transactions of KSME, Vol. 31, No. 43, pp. 461-471. https://doi.org/10.3795/KSME-A.2007.31.4.461
  17. Hainsworth, S. V., Chandler, H. W. and Page, T. F., 1996, "Analysis of Nanoindentation Load-displacement Loading Curves," Journal of Materials Research, Vol. 11, No. 8, pp. 1987-1995. https://doi.org/10.1557/JMR.1996.0250
  18. Chen, X., Ogasawara, N., Zhao, M. and Chiba, N., 2007, "On the Uniqueness of Measuring Elastoplastic Properties from Indentation: The Indistinguishable Mystical Materials," Journal of the Mechanics and Physics Solid, Vol. 55, pp. 1618 - 1660. https://doi.org/10.1016/j.jmps.2007.01.010
  19. Lee, J. H., Lee, H. and Kim, D. H., 2008, "A Numerical Approach to Elastic Modulus Evaluation Using Conical Indenter with Finite Tip Radius," Journal of Materials Research, Vol. 23, No.1, pp. 2528-2537. https://doi.org/10.1557/jmr.2008.0314
  20. Bucaille, J. L., Stauss, S., Felder, E. and Michler, J., 2003, "Determination of Plastic Properties of Metals by Instrumented Indentation Using Different Sharp Indenters," Acta Materialia, Vol. 51, pp. 1663-1678. https://doi.org/10.1016/S1359-6454(02)00568-2
  21. Chollacoop, N., Dao, M. and Suresh, S., 2003, "Depth-sensing Instrumented Indentation with Dual Sharp Indenters," Acta Materialia, Vol. 51, pp. 3713- 3729. https://doi.org/10.1016/S1359-6454(03)00186-1
  22. Ogasawara, N., Chiba, N. and Chen, X., 2005, "Representative Strain of Indentation Analysis," Journal of Materials Research, Vol. 20, No. 8, pp. 2225-2234. https://doi.org/10.1557/JMR.2005.0280
  23. Ogasawara, N., Chiba, N. and Chen, X., 2006, "Limited Analysis-based Approach to Determine the Material Plastic Properties with Conical Indentation," Journal of Materials Research, Vol. 21, No. 4, pp. 947-957. https://doi.org/10.1557/jmr.2006.0108
  24. Hyun, H. C., Kim, M., Lee, J. H. and Lee, H., 2009, "A Conical Indentation Technique Based on FEA Solutions for Property Evaluation," Transactions of KSME, Vol. 33, No. 9, pp. 859- 869. https://doi.org/10.3795/KSME-A.2009.33.9.859
  25. ABAQUS User's Manual, 2009, Version 6.7, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI.
  26. Oliver, W. C. and Pharr, G. M., 1992, "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," Journal of Materials Research, Vol. 7, No. 6, pp. 1564-1583. https://doi.org/10.1557/JMR.1992.1564
  27. Hyun, H. C., Lee, J. H. and Lee, H., 2008, "Mathematical Expressions for Stress-strain Curve of Metallic Material," Transactions of KSME, Vol. 32, No. 1, pp. 21-28. https://doi.org/10.3795/KSME-A.2008.32.1.021