• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.3
• /
• pp.184-190
• /
• 2015

NVH engineering has become a hot issue due to radical technology changes and development in automotive industry since customers' expectations and needs for their vehicle is taken to a higher level. However, the source identification and quantification of the road noise within a vehicle is still not at the level where it needs to be to meet their expectations due to its' complex transfer path and difficulties in path optimization. The primary focus of this research is on direct force obtaining method at suspension hard points using suspension test rig. Directly obtained forces at suspension to body mounting points are critical and crucial for determining the effects of design changes of the suspension has on road noise performance. Direct force obtaining method has its limitation in sensor installation within an actual vehicle therefore, many has been indirectly calculating forces using full matrix inversion method or dynamic stiffness method. In this study, to circumvent this limitation, a suspension rig is used. Then, the suspension rig is verified through a comparative analysis of its dynamic behavior between the actual vehicle by cleat test on chassis dynamometer.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.17-24
• /
• 2012

Andre Bazin called the movie frame as "the window open to the world." This expression is close to realization through 3D films. The 'Avatar' released in 2009 was a new turning point for 3D films. Nowadays the theory and information about 3D films is overflowed. It is necessary to find practices and to accumulate data useful in production of 3D films. There are several ways of working to achieve high quality 3D films. In any way that's chosen, there are priorities to be considered to create well-balanced 3D films. The aim of this article is to review primary considerations in film-making and share the technical issues experienced during the production of "Let's go to the amusement park again, Mom." Because the current practical knowledge in making 3D film is shallow, this article will offer a possible reference for further research.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.243-252
• /
• 2012

This paper reviews the implementation of the STCW 78/95 in the Philippine MET including the effects of the revised 2010 Manila Amendments. It discusses the country's maritime environment and the structures, quality of maritime education in the country and the effects on the maritime human resource. Among the various resolutions adopted at the conference, the standards of training and certifications, and promoting skills and competency will be more emphasized in this report. These will be compared with the existing curriculum mandated by CHED and upgrade STCW trainings advised by MTC for maritime institutions. A brief comparison and analysis with other Asian countries' maritime training shall be offered. The recommendation pinpoints to the weaknesses of the present maritime regimes in certification and evaluation of maritime institutions. It concludes with the need to have mutually acceptable evaluation standards in view of developing a competent human resource for the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5669-5675
• /
• 2012

To reduce the cost and the time of transport in Eurasian railroad networks such as TKR(Trans-Korea Railway), TCR(Trans-China Railway) and TSR(Trans-Siberia Railway) owing to the problem of different track gauges (narrow/standard/broad gauge), it is important to develop the gauge-adjustable wheelset(GAW) system to adapt easily to these gauges. The Korean GAW system is developing and will be adapting to the brand new freight trains' to improve the conventional overseas GAW system. In this study, structural and durability analyses are performed from the viewpoint of the safe-life design. The core parts of the system might be safe in range of $1{\times}10^7$ cycles from the result of durability analysis. Moreover, to examine the safety of the system while running on a track, rig fatigue test was performed according to UIC code. The safety of the Korean GAW system is demonstrated through testing that all safety-relevant conditions are satisfied.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.222-235
• /
• 2010

After its remarkable success, "Avatar" brought another way of creating cinematic story; the stereoscopic 3-D cinema. Comparing conventional 2-D filmmaking, you need twice as much of budget and manpower in 3-D filmmaking because of the complicated process and slow production speed. The 3-D hardware like 3-D TV and 3-D projector are already showing at the retail stores while 3-D filmmaking is still in veil, and no major educational institution is yet to start 3-D related education. As 3-D movies get popular and demand more 3-D filmmaking professional crew, educating 3-D filmmaking to 2-D based film students will improve their hiring rate in the market. The successful result of the box office showing 3-D films like "Alice in Wonderland 3D" and "Titan 3D" forecasts that there will be more demand on 3-D related jobs very soon.

• Tribology and Lubricants
• /
• v.25 no.6
• /
• pp.387-398
• /
• 2009

The operation condition of recently designed pistons for high power and high speed diesel engine become more severe due to the increment of combustion pressure and temperature. So, in order to overcome high temperature, the application of the mono-metal cast aluminum alloy piston featuring an enclosed cast-in open cooling gallery has increased. In this research, it is developed a PCJ (piston cooling jet) rig tester, described the test procedure and validated the performance of sample piston cooling gallery design. Then the test rig will be used for developing the design technology of piston cooling gallery. The test rig is composed with oil reservoir and pumping system, oil jet system, piston fixing and moving system, collecting oil measuring system, and data measuring and recording system. It will be measured collecting efficiencies under conditions of a few piston positions, oil jet pressures and oil viscosities for a piston cooling gallery. Furthermore, the PCJ rig tester will be used for the optimum design of the oil cooling gallery which being applied to increase the cooling efficiency of pistons in diesel engines satisfying the EURO V emission regulation and the more.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.147-152
• /
• 2020

The baseball elimination problem(BEP) is eliminates teams that finishes the season in the early stage without play the remaining games because of the team never most wins even though all wins of remaining games. This problem solved by max-flow/min-cut theorem. But the max-flow/min-cut method has a shortcoming of iterative constructs the network for all of team and decides the min-cut for each network. This paper suggests ascending sort in wins game plus remaining games for each team, then the candidate eliminating team set K with lower 1/2 rank and most easy, simple, and fast computes the existence or not of subset R that a team elimination decision. As a result of various experimental data, this algorithm can be find all of elimination teams for whole data with fast and correct.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.6
• /
• pp.51-58
• /
• 2019

In this study, a set of performance tests on 3D-printed combustor components were carried out to investigate the performance of 3D-printed component and its feasibility for micro gas turbine engines. The test were conducted for four different equivalence ratios under two different engine operating conditions. The measurement results show that the tested combustor had a low total pressure loss coefficient and a uniform exit temperature distribution. However, the combustion efficiency values are less than 93.5% owing to the large amount of UHC and CO, which is considerably lower than a typical gas turbine engine combustor. The performance data obtained from the tests will be used for combustor performance improvements using 3D-printing technology.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.6
• /
• pp.1065-1074
• /
• 2012

The purpose of this paper is to statistically analyze the effects of on-base and slugging ability on the run productivity in Korean professional baseball. In Section 2, we have investigated the OPS (On-base percentage Plus Slugging average) and introduced new indices of batting ability by modifying the OPS. In Section 3, we have examined the correlation which the batting average, on-base percentage, slugging average, IsoP (Isolated Power), OPS and the indices introduced in Section 2 have with the average runs per game, using the data from all the games of the regular seasons in 2007~2011. In addition, by generalizing the OPS and the indices introduced in Section 2, we have analyzed the correlation of the indices with various weights between the average runs per game. As a result, the weighted OPS consisting of on-base percentage (with weight 57%) and slugging average (with weight 43%) has been found to give the best explanation of the run productivity.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.178-182
• /
• 2007

This research was conducted to evaluate the effect of lignin addition on the characteristics of portland cement pastes. Lignin was added to cement at the ratio of 0.5 to 2.0% on dry weight basis. The specimens were cured for 3, 7, 14, and 28 days. Distilled water and sea water were used as leaching solutions. pH and concentration of Ca, Na, and K ions in the leaching solutions were analyzed. Lignin addition of 0.5~2.0% to cement pastes decreased the leached concentration of Ca, Na, and K ions for distilled water, compared to the case without lignin addition. However, a significant pH variation of the leached solutions was not observed with the lignin addition. Lignin addition significantly improved the compressive strength of cement pastes, approximately 30~60% for curing in distilled water and 3~20% for that in sea water.