• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.630-634
• /
• 2008

The effect of packaging methods on the quality characteristics of leaf lettuces was studied during storage at low temperature. Using five commercial packaging types: non-perforated PP (polypropylene) film bags, PP film roll, perforated PP film bags, PET (polyethyleneterephthalate) trays, and micro-perforated LDPE film bags, changes in color, respiration rate, and weight loss of leaf lettuces were investigated. Packaging in non-perforated PP film bags minimized color change and weight loss during storage. The leaf lettuces packaged in non-perforated PP film bags, among the five packaging choices, showed good external appearance and offered the greatest sale potential in the domestic market. However, there were no clear differences in the respiration rates of lettuces packed in various ways. The PET tray afforded very good protection of leaf lettuces from physical damage. The results indicate that the marketability of lettuces may be directly affected by the packaging modes employed, and that the optimal packaging may be non-perforated PP film bags; these keep lettuces fresh during low-temperature storage.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.234-239
• /
• 1999

고추는 대부분 건고추를 굵은 고춧가루, 보통 고춧가루, 고운 고춧가루로 분쇄하여 김치류, 고추장 등의 발효식품과 양념류에 주로 사용되고 있으며, 국민 일인당 연간 소비량은 고춧가루를 기준으로 2.5kg, 건고추를 기준으로 3.5kg에 이르고 있다. 건고추를 가루로 분쇄하는 방법은 종래 절구로 찧어 빻는 방법에서 생산성을 높이기 위하여 1960년대 중반부터 국내 특유의 압축식 롤 밀(Roll Mill)형태의 분쇄방법으로 전환되었으며, 구미의 햄머 밀이나 디스크 밀에 의한 분쇄방법과는 차이가 있다. 이것은 소비형태에 의한 차이로서 우리는 발효식품의 숙성을 위하여 고춧가루의 수축복원력을 향상시키는 방법으로 고추과피의 섬유질을 압축력과 전단력을 이용하여 분쇄하는 형태인 반면에, 구미에서는 고춧가루를 단순히 조미향신료의 첨가제로 사용하는 차이점 때문이다. (중략)

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1570-1571
• /
• 2007

본 연구는 제지회사나 섬유회사 또는 인쇄업소등에서 각 제품의 원자재인 롤 형태의 종이, 원단 및 코팅지등의 필름이 롤러를 통해 고속으로 가공기계에 공급되어 감거나 풀 때 이동 중인 필름이 일정한 위치에서 벗어날 경우 초음파 센서가 이를 감지하여 필름을 이송하는 모터를 동작하여 롤러의 축선방향을 조정함으로써 필름이 항상 일정한 위치로 가공기계에 공급 될 수 있도록 구성된 시스템의 개발에 관한 내용이다.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.25-29
• /
• 2020

In this study, a polymer/graphene hybrid composite was prepared by a simple roll-method and a simple sensor was produced by a convenient surface engineering procedure. The sensor performance was examined and the effect of graphene content on the sensing behavior was monitored. A polymer (polydimethylsiloxane, PDMS) paste containing graphene powder was prepared by a three-roll apparatus and polymer/graphene hybrid composite was produced by a two-roll technique. The sensing medium, cyclodextrin (CD) was introduced by a convenient bio-conjugation method. The efficacy of surface modification was confirmed by FT-IR spectroscopy and the ohmic relation was observed on composite surfaces. An analyte (e.g., methyl paraben, MePRB) at a 10 nM concnetration could be detected. When the graphene loading was low, the sensor performance was relatively poor. This was attributed to the absence of graphene alignments, which were observed for the composites having a high graphene loading. This indicates that the sensor performance was influenced by physical alignments of the filler. This article can provide important information for future research on developing sensing devices.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.372-385
• /
• 1995

본 연구의 목적은 비외과적 치주치료시 부가적으로 사용하기 위해 실험적으로 개발한 젤 형태의 테트라사이클린 및 테트라사이클린-구연산 혼합젤의 치근면에 대한 시간에 따른 활성도를 측정하고, 이를 용액 형태의 테트라사이클린 제제 또는 클로르헥시딘 들과 비교하는 것이다. 6명의 환자로 부터 18개의 발치된 치아를 실험대상으로 하였으며, 치아는 발치한 즉시 치석제거술과 치근활택술을 시행한 후 각 각 4개씩 4군으로 나누어 다옴과 같은 처치롤 하였다 ; 1) O.1% 클로르핵시딘 용액에 5분간 침전; 2) 50mg/ml의 테트라사이클린 용액에 5분간 침전; 3) 5% 테트라사이클린 젤에 5 분간 처리 ; 4) 테트라사이클린-구연산 혼합첼로 5 분간 처치; 5) 그리고 2개의 치아는 대조군으로서 멸균된 생리식염수에 5분간 처리하였다. 침전후 치아는 1ml의 tris-buffered saline이 담긴 용기에 옮겨 24시간 간격으로 탈착된 TBS용액올 교체하면서 실온에서 22일간 보관하였다. Porphyromonas gingivalis를 indicator organism으로 하여 microtiter assay를 이용하여 홉광도를 측정 함으로써 제거 된 용액 의 항 미생물 활성올 측정하였다. 1. 50mg/ml 의 테트라사이클린 수용액에 침전되었던 군은 생리식염수로 처리한 군에 비하여 17 일간 클로르헥시딘으로 처리한 군에 비하여는 16일간 항미생물 활성에 있어서 유의성 있는 차이를 보였다. 2. 테트라사이클린 젤과 테트라사이클린-구연산 혼합첼로 처리한 군은 대조군에 비하여 각 각 4일과 3일 까지 활성올 보였다. 3. 0.1% 클로르핵시딘 용액으로 처리한 군은 생리식염수로 처치한 군에 비하여 24시간 밖에 활성을 나타내지 못했다. 4. 전반척으로 테트라사이클린-구연산 혼합첼로 처리한 군에 비하여 테트라사이클린 첼로 처리한 군의 활성이 높았으나 유의성 있는 차이롤 보이지는 않았다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.203-211
• /
• 2016

In contrast with STT missiles, the guidance law design for BTT missiles should be based on 3-dimensional pursuit kinematics, since the pitch and roll channels of BTT missiles are coupled dynamically. More generally than the prior works, the dynamics of pitch and roll channels, as well as 3-dimensional pursuit kinematics are considered in the design of our terminal-phase optimal guidance law for BTT missiles proposed in this paper. Thereby, the proposed optimal guidance law guarantees high capturability with small miss distance without significant performance degradation due to time-lag effect even in case of relatively slow autopilot dynamics. Moreover, the resulting optimal guidance law is expressed explicitly in feedback-form with the coefficients given as the functions of time-to-go. The effectiveness and practicality of our work is demonstrated through various simulation results.

• Fashion & Textile Research Journal
• /
• v.24 no.5
• /
• pp.505-518
• /
• 2022

3D printing technology, also known as additive manufacturing(AM), has not been actively used in the clothing industry despite its potential for economic, environmental, and labor efficiency. Therefore, this study aims to propose a new 3D printing method for the clothing industry, which will be more readily accessible. This roll-type printing method can print wide-sized patterns at once using a 3D modeling program and a FDM 3D printer and help overcome the limitations imposed by the size of the printer. Then, to demonstrate the practical application cases of this printing method, bags of three designs were developed. Prior to product development, a thickness test was performed for stable printing using TPU(Thermoplastic Poly Urethane) filament, and a thickness of 0.45 mm was found to be most suitable for it. Next, the time efficiency test showed that the roll-type printing method takes less time compared to the general printing method in printing wide-sized patterns. Based on these tests, three bags, , and , were developed to confirm the suitability of the roll-type printing method for product development. The advantages of 3D roll-type printing can lie in overcoming of the spatial limitation, and the environmental sustainability as it can reduce waste from the production process. This study is significant in that it presents a new 3D printing method to improve the space limitations and time inefficiency of 3D printers.

• The Journal of Korean Association of Computer Education
• /
• v.13 no.1
• /
• pp.9-18
• /
• 2010

The purpose of this study is to determine the differences in menu-layout preference for learners based on their demographics. The experiment was conducted in this manner: three class second grade and three class sixth grade elementary school students were separated by sex, grade, age and cognitive style such as field-dependent and field-independent. They were asked to choose which menu layouts they preferred or did not prefer out of 6 different types. The results of the research are as follows: First, there were no differences in sex, grade and cognitive style for preferences in the menu layout but there were meaningful differences with regard to age. Second grade students preferred map-type layout, but sixth grade students preferred the type having a main menu across the top with a sub menu in roll over. Second, there was a difference with regard to age as to what they do not prefer. Overall, the results of this study suggest that the menu layout for a learning web site on the internet needs to be different according to their age.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.39-48
• /
• 2012

In case a measurement output of gyro sensor is an accumulated angle counts, it is usually provided as a binary bit counter which is allowed to roll-over at its maximum or minimum value. And it is a well known fact that the roll-over behavior restricts the measurement range of the processed sensor output below the actual measurable range of sensor hardware itself. In this study, a conventional sensor data processing method for a gyro with an accumulated angle output is introduced. And also, an improved method which can extend the processed output range over the conventional one is proposed. It is also derived that the increased range depends on the variation speed of a input signal. Finally, the derived equations and the performance of the proposed algorithm are verified using a computer simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.374-374
• /
• 2010

본 연구는 Roll-to-Roll Sputtering 장비를 사용하여 제작된 Flexible ITO electrode 필름의 방사선 검출기로의 적용가능성을 알아보기 위해 기존의 Glass ITO electrode의 전기적 특성을 비교 평가하였다. 본 연구는 Flexible ITO electrode와 Glass ITO electrode을 하부전극으로 형성하고, 최근에 X-ray 변환체로 활발히 연구되고 있는 Powder 형태의 반도체물질인 HgI2 와 PbI2를 Binder와 일정한 비율로 혼합하여 3-Rolls-Miller를 사용하여 Powder를 일정한 미세크기로 만들고, 대면적 제작이 용이한 Screen-Printing method을 이용하여 시편을 제작하였다. 제작된 필름은 하부전극의 종류에 따른 X-ray 입사 후의 전기적신호의 차이를 측정하고, HgI2와 PbI2 중 Flexible ITO electrode와 더욱 효율적으로 반응하여 기존의 Glass ITO electrode를 대체할 수 있는 전극을 발견하여 진단용 의료영상의 왜곡 현상을 제거할 수 있는 Flexible 방사선 검출기의 제작의 초석을 제공하는 연구를 목적으로 한다. SEM(Scanning Electron Microscope) 통하여 반도체 물질의 결정구조와 크기를 알아보았고, 하부 전극의 종류에 따른 전기적 신호검출을 위해 제작된 필름의 암전류(Dark current) 와 민감도(Sensitivity)를 측정한 후, SNR (Signal -to- Noise)을 계산하여 평가하였다.