Fashion & Textile Research Journal (한국의류산업학회지)

The Society of Fashion and Textile Industry (한국의류산업학회)
권호 표지
DOI QR코드

DOI QR Code

Development of 3D Printed Bags Using Roll-Type Printing Method

롤(roll) 형태의 출력방식을 활용하는 3D 프린팅 가방 개발

  • Lee, Jiwon (Dept. of Textile, Merchandising and Fashion Design, Seoul National University) ;
  • Chun, Jaehoon (Dept. of Textile, Merchandising and Fashion Design, Seoul National University/Research Institute of Human Ecology, Seoul National University)
  • 이지원 (서울대학교 의류학과) ;
  • 전재훈 (서울대학교 의류학과/서울대학교 생활과학연구소)
  • Received : 2022.08.19
  • Accepted : 2022.09.22
  • Published : 2022.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

3D printing technology, also known as additive manufacturing(AM), has not been actively used in the clothing industry despite its potential for economic, environmental, and labor efficiency. Therefore, this study aims to propose a new 3D printing method for the clothing industry, which will be more readily accessible. This roll-type printing method can print wide-sized patterns at once using a 3D modeling program and a FDM 3D printer and help overcome the limitations imposed by the size of the printer. Then, to demonstrate the practical application cases of this printing method, bags of three designs were developed. Prior to product development, a thickness test was performed for stable printing using TPU(Thermoplastic Poly Urethane) filament, and a thickness of 0.45 mm was found to be most suitable for it. Next, the time efficiency test showed that the roll-type printing method takes less time compared to the general printing method in printing wide-sized patterns. Based on these tests, three bags, , and , were developed to confirm the suitability of the roll-type printing method for product development. The advantages of 3D roll-type printing can lie in overcoming of the spatial limitation, and the environmental sustainability as it can reduce waste from the production process. This study is significant in that it presents a new 3D printing method to improve the space limitations and time inefficiency of 3D printers.

Keywords

References

  1. Chan, I., Au, J., Ho, C., & Lam, J. (2020). Creation of 3D printed fashion prototype with multi-coloured texture - A practice-based approach. International Journal of Fashion Design, Technology and Education, 14(1), 78-90. doi:10.1080/17543266.2020.1861342
  2. Chun, J. H. (2017). Development of wearable fashion prototypes using entry-level 3D printers. Journal of the Korean Society of Clothing and Textiles, 41(3), 468-486. doi:10.5850/JKSCT.2017.41.3.468
  3. Dalenogare, L. S., Benitez, G. B., Ayala, N. F., & Frank, A. G. (2018). The expected contribution of Industry 4.0 technologies for industrial performance. International Journal of Production Economics, 204, 383-394. doi:10.1016/j.ijpe.2018.08.019
  4. Everitt, A., Eady, A. K., & Girouard, A. (2021). Enabling multi-material 3D printing for designing and rapid prototyping of deformable and interactive wearables. Proceedings of the 20th International Conference on Mobile and Ubiquitous Multimedia, .Belgium, pp. 1-11. doi:10.1145/3490632.3490635
  5. Gebler, M., Schoot Uiterkamp, A. J., & Visser, C. (2014). A global sustainability perspective on 3D printing technologies. Energy Policy, 74, 158-167. doi:10.1016/j.enpol.2014.08.033
  6. Goncu-Berk, G., Karacan, B., & Balkis, I. (2022). Embedding 3D printed filaments with knitted textiles: investigation of bonding parameters. Clothing and Textiles Research Journal, 40(3), 171-186. doi:10.1177/0887302x20982927
  7. Grimmelsmann, N., Meissner, H., & Ehrmann, A. (2016). 3d printed auxetic forms on knitted fabrics for adjustable permeability and mechanical properties. IOP Conference Series - Materials Science and Engineering, 137, 012011. doi:10.1088/1757-899x/137/1/012011
  8. Gurcum, B. H., Borklu, H. R., Sezer, K., & Eren, O. (2018). Implementing 3D printed structures as the newest textile form. Journal of Fashion Technology & Textile Engineering, S4. 019. doi:10.4172/2329-9568.s4-019
  9. Ignacio, T. (2016, November 11). Studio visit with 3D printer fashion design - Mingjing Lin. 3d Printing Industry. Retrived August 4, 2021, from https://3dprintingindustry.com/news/studio-visit-3Dprinter-fashion-designer-mingjing-lin-98323/
  10. Jeong, J., Park, H., Lee, Y., Kang, J., & Chun, J. (2021). Developing parametric design fashion products using 3D printing technology. Fashion and Textiles, 8(1), 1-25. doi:10.1186/s40691-021-00247-8
  11. Jin, B. E., & Shin, D. C. (2021). The power of 4th industrial revolution in the fashion industry - What, why, and how has the industry changed?, Fashion and Textiles, 8(1), 1-25. doi:10.1186/s40691-021-00259-4
  12. Kam, S. J. (2019). The Study on 3D printing fashion design case for sustainable design. Journal of The Korea Association of Art & Design, 22(2), 151-168.
  13. Kam, S. J., & Yoo, Y. S. (2019). Presentation methods for transformable fashion design. Korean Society of Fashion Design, 19(3), 1-18. doi:10.18652/2019.19.3.1
  14. Kamble, S., Gunasekaran, A., & Dhone, N. C. (2019). Industry 4.0 and lean manufacturing practices for sustainable organisational performance in indian manufacturing companies. International Journal of Production Research, 58(5), 1319-1337. doi:10.1080/00207543.2019.1630772
  15. Kang, J. H.. (2020). Development of a 3D printing method for garment panels using the hybrid textile structure. Unpublished doctoral dissertation, Seoul National University, Seoul.
  16. Kim, H. E. (2015). The research into the changes of fashion industry according to the development of 3D printing technology. Korean Society of Fashion Design, 15(4), 17-33. doi:10.18652/2015.15.4.2
  17. Kim, H. E. (2017). A study into the consumer consciousness about the environmental friendliness of canvas eco-bags - A qualitative research about eco-bag users in 20s women. Korean Society of Fashion Design, 17(3), 141-154. doi:10.18652/2017.17.3.9
  18. Kim, M. H. (2020). A study on the modular race textile design using 3D printing. The Treatise on The Plastic Media, 23(2), 55-63. doi: 10.35280/kotpm.2020.23.2.7
  19. Kim, S. Y. (2022). Domestic research trends in 3D printing fashion. Journal Korea Society of Visual Design Forum, 75, 103-114. doi:10.21326/ksdt.2022.27.2.009
  20. Kim, S., Seong, H., Her, Y., & Chun, J. (2019). A study of the development and improvement of fashion products using a FDM type 3D printer. Fashion and Textiles, 6(1), 1-24 doi:10.1186/s40691-018-0162-0
  21. Kwan, J. S. (2012). A study on sustainability design expressed as a eco-bag. Journal of the Korea Entertainment Industry Association, 6(4), 196-203. doi:10.21184/jkeia.2012.12.6.4.196
  22. Lee, H. (2019). A study on the development of 3d printed garments for fashion show. Fashion & Textile Research Journal, 21(3), 267-276. doi:10.5805/SFTI.2019.21.3.267
  23. Lee, J. S. (2020). A study on types of 3D printing applications and their characteristics in fashion design. Journal of Fashion Business, 24(4), 130-143. doi:10.12940/jfb.2020.24.4.130
  24. Lee, J. S., & Lee, K. W. (2022). A study on 3D printing fashion design that converges lace technique. The Korean Society of Science & Art, 40(1), 291-304. doi:10.17548/ksaf.2022.01.30.291
  25. Lee, S. K.., & Koo, S. M. (2022). Development of three-dimensional printed cultural fashion products using symbols of longevity. Textile Research Journal, 92(21-22), 4484-4500. doi:10.1177/00405175221105237
  26. Lee, S. H., & Lee, J. S. (2021). Development of 3D printing fashion eyewear using eco-friendly filaments. Korean Society of Fashion Design, 21(2), 1-16. doi:10.18652/2021.21.2.1
  27. Lim, H. W., & Cassidy, T. D. (2014) 3D printing technology revolution in future sustainable fashion. Proceedings of the Sustainability in Textiles and Fashion, International Textiles & Costume Culture Congress (ITCCC), South Korea., pp. 1-5.
  28. Machado, C., Winroth, M., & Ribeiro da Silva, E. (2020). Sustainable manufacturing in industry 4.0 - An emerging research agenda. International Journal of Production Research, 58(5), 1462-1484. doi:10.1080/00207543.2019.1652777
  29. Melnikova, R., Ehrmann, A., & Finsterbusch, K. (2014). 3D printing of textile-based structures by fused deposition modelling (FDM) with different polymer materials. IOP Conference Series - Materials Science and Engineering, 62(1), 012018. doi:10.1088/1757-899x/62/1/012018
  30. 'Nervous System - Kinematics Dress Design and 3D-Printing Process'. (2017, May 19). YouTube. Retrieved March 28, 2022, from https://www.youtube.com/watch?v=6EK9MBJiFXU
  31. Pasricha, A., & Greeninger, R. (2018). Exploration of 3D printing to create zero-waste sustainable fashion notions and jewelry. Fashion and Textiles, 5(1), 1-18. doi:10.1186/s40691-018-0152-2
  32. Sabantina, L., Kinzel, F., Ehrmann, A., & Finsterbusch, K. (2015). Combining 3d printed forms with textile structures - Mechanical and geometrical properties of multi-material systems. IOP Conference Series - Materials Science and Engineering, 87(1), 012005. doi:10.1088/1757-899x/87/1/012005
  33. Sertoglu, K. (2022, June 15). Studio visit with 3D printer fashion designer - Mingsjin Lin. 3D Printing Industry. Retrieved July 3, 2022, from https://3dprintingindustry.com/news/studio-visit-3dprinter-fashion-designer-mingjing-lin-98323/
  34. Sitotaw, D. B., Ahrendt, D., Kyosev, Y., & Kabish, A. K. (2020). Additive manufacturing and textiles - State-of-the-art. Applied Sciences, 10(15), 5033. doi:10.3390/app10155033
  35. Song. H. Y. (2020). Textile structural design with fabric flexibility using SLS 3D printing technology. Journal of Fashion Business, 24(3), 85-100. doi:10.12940/jfb.2020.24.3.85
  36. Spahiu, T., Canaj, E., & Shehi, E. (2020). 3D printing for clothing production. Journal of Engineered Fibers and Fabrics, 15, 155892502094821. doi:10.1177/1558925020948216
  37. Srivastava, M., & Rathee, S. (2021). Additive manufacturing - recent trends, applications and future outlooks. Progress in Additive Manufacturing, 7(2), 261-287. doi:10.1007/s40964-021-00229-8
  38. Sun, L., & Zhao, L. (2017). Envisioning the era of 3D printing - A conceptual model for the fashion industry. Fashion and Textiles, 4(1), 1-16. doi:10.1186/s40691-017-0110-4
  39. Takahashi, H., & Kim, J. (2019). 3D printed fabric - Techniques for design and 3D weaving programmable textiles. Proceedings of the 32nd Annual ACM Symposium on User Interface Software and Technology, United States, pp. 43-51. doi:10.1145/3332165.3347896
  40. Tenhunen, T., Moslemian, O., Kammiovirta, K., Harlin, A., Kaariainen, P., Osterberg, M., Orelma, H. (2018). Surface tailoring and designdriven prototyping of fabrics with 3D-printing - An all-cellulose approach. Materials & Design, 140, 409-419. doi:10.1016/j.matdes.2017.12.012
  41. Uysal, R., & Stubbs, J. B. (2019). A new method of printing multimaterial textiles by fused deposition modelling (FDM). Tekstilec, 62(4), 248-257. doi:10.14502/tekstilec2019.62.248-257
  42. Vanderploeg, A., Lee, S. E., & Mamp, M. (2017). The application of 3D printing technology in the fashion industry. International Journal of Fashion Design, Technology and Education, 10(2), 170-179. doi:10.1080/17543266.2016.1223355
  43. Wang, S., Wan, J., Zhang, D., Li, D., & Zhang, C. (2016). Towards smart factory for industry 4.0 - A self-organized multi-agent system with big data based feedback and coordination. Computer Networks, 101, 158-168. doi:10.1016/j.comnet.2015.12.017
  44. Xiao, Y. Q., & Kan, C. W. (2022). Review on development and application of 3D-printing technology in textile and fashion design. Coatings, 12(2), 267. doi:10.3390/coatings1202026