• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.351-355
• /
• 2017

In this paper, we conduct a simulation of manipulating various pulsed laser operations through tuning the modulation depth of the saturable absorber in a laser cavity. The research, showing that various pulsed operations could be manipulated from Q-switching through Q-switched mode locking to mode locking by tuning the modulation depth of the saturable absorber in a cavity, has been studied by experimental means. We conduct a simulation with the Haus master equation to verify that these experimental results are consistent with expectations from theory. The time dependence of the gain was considered to express Q-switching fluctuation through applying a rate equation with the Haus master equation. Laser operation was manipulated from mode locking through Q-switched mode locking to Q-switching as modulation depth was increased, and this result agreed well with the theoretical expectation.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.168-169
• /
• 2001

1.55 $\mu\textrm{m}$ 파장 대역에서 동작하는 파장가변 단일 주파수 레이저는 WDM 통신 시스템, 광섬유 센서, 분광학 분야에 유용하게 사용될 수 있다. 특히 어븀첨가 광섬유 레이저로 파장가변 단일 주파수 레이저를 구현하면 선폭이 가늘고, 세기 잡음이 작고, 출력 세기가 크다는 장점이 있기 때문에 많은 연구가 있어 왔다. 본 논문에서는 음향광학 대역투과 필터 (acousto-optic tunable bandpass filter, AOTBF)와 광섬유 흡수 격자를 사용하는 선형공진기 형태의 파장가변 단일 주파수 광섬유 레이저에 대해서 제안하고 구현하였다. (중략)

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.555-556
• /
• 2008

본 연구에서는 레이저빔 투과를 이용한 본딩 웨이퍼 검사 방법을 제안하고 검사 장치를 설계 구현하였다. 1064nm 파장에서의 정상웨이퍼를 일정한 비율로 투과 하였다. 본딩 불량으로 인한 웨이퍼의 기공은 두께에 따라 투과율이 현저하게 변화하여 기공 부분을 검출하였다. 이러한 기공은 두께의 변화가 있으며 광량의 변화하는 부분이 에어갭으로 인식 카메라로 쉽게 구분이 가능하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.226-227
• /
• 2001

CsLiB$_{6}$O$_{10}$(CLBO) 단결정은 넓은 광투과 영역, 극자외선 영역에서의 광투과성, 비교적 큰 비선형 광학계수, 높은 레이저 광손상 문턱값 등의 우수한 특성으로 인해 극자외선 영역에서의 파장변환과 고출력 레이저의 파장변환에 매우 활발한 응용이 시도되고 있다. 본 연구에서는 CLBO 단결정을 이용하여 Nd：YAG 레이저의 1064 nm 파장을 4차 조화파인 266 nm 파장으로 변환시키고 광변환 특성을 조사하였다. (중략)

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.753-763
• /
• 2013

Laser transmission welding of polymers is now used in a very wide range of industries due to its advantages. If the joining between polypropylene (PP) and polycarbonate (PC) occurs by laser transmission welding, the automotive headlight will get a large profit. However, PP/PC have poor miscibility. In the laser transmission welding results, the adhesion strength between PP and PC was very weak. In this study, PP was modified by grafting of glycidyl methacrylate (GMA). The adhesion strength of PC and PP-g-GMA as a reactive compatibilizer was observed. The adhesion strength was investigated by compatibility with PC, mechanical properties and laser transmission welding.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.24-30
• /
• 2006

Integrated cavity output spectroscopy(ICOS) is a simple, non-intrusive absorption measurement technique that can detect and quantify trace-level gas species. The spectral absorbance of a gas is quantified from the integrated optical output of the modulated high-finesse cavity containing the sample which is irradiated by a wavelength-swept laser source. We constructed an experimental setup by using a tunable single mode external cavity diode laser operating at the wavelength near 765 nm and a Fabry-Perot cavity with length modulation achieved by a piezoelectric transducer where one of the cavity mirrors sat on. In the experiment performed on minute oxygen gas at the wave-length near 764.5nm, we demonstrated the minimum detectable absorption of $8.45\times10^{-8}cm^{-1}$.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.263-267
• /
• 2013

In this research, a novel optical measuring methodology for the measurement of oil thickness in seawater is suggested by evaluating the light absorption which is occurred in the process of penetrating through oil layer on seawater. Laser having monochromatic wave is used as a light source and photodiode which can convert the intensity of the light into an electrical signal is applied to measure the intensity of the penetrating light through the oil-water mixtures. In the experiment, bunker C and lubricating oil are used, and three different lasers having different wavelengths are applied and compared for the selection of an optimal light source. As a result, it is observed that in the case of blue laser, the intensity of the light on the optical sensor decreases with an increase in the oil thickness. Through this relation, both the presence of oil and the thickness of oil can be determined.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.456-460
• /
• 1997

Several methods of aligning ring type cavities have been investigated for long time. The measurement of cavity transmission spectrum control is somewhat effective due to aligning cavity with measuring cavity loss at the same time. In this research, four mirrors are aligned and attached by the measurement of pulse width of the transmitted light. The intracavity loss is optimized to about 0.98%, giving the calculated total reflection coefficient of about 99.02%.

• The Journal of Natural Sciences
• /
• v.14 no.2
• /
• pp.15-23
• /
• 2004

생활 주변에서 쉽게 구할 수 있는 플래쉬 램프회로를 이용하여 소형 고체레이저를 개발하였다. 레이저 매질로는 Nd:YAG가 사용되었으며, 수동형 큐스위칭 $동작^{[1-4]}$을 위하여 Cr:YAG 결정이 사용되었다. 플래쉬 램프 회로로는 코닥 일회용 카메라, 후지 일회용 카메라, 자동차 장식용으로 사용되는 훠링의 스파크 라이트를 사용하였다. 레이저의 펌핑 에너지에 따른 레이저 출력의 변화를 측정하고, 수동형 Q-switch로 사용되는 Cr:YAG의 도핑 농도에 따른 레이저 출력을 측정하였다. 또한 출력경의 투과율에 따른 레이저 출력을 측정하여 레이저 출력경의 최적투과율을 실험적으로 구하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1680-1686
• /
• 2010

Optical fiber Bragg grating to have the lowest transmitivity at 1549.9nm wavelength was fabricated using a Gaussian distributed KrF Eximer laser of 248nm lasing wavelength and a phase mask of 1.072um period. The proper alignment of an optic setup to fabricate fiber gratings was investigated and the reproductivity of the grating fabrication was examined using the obtained optimum fabrication condition in this experiment.