• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.47-58
• /
• 2011

MTI filter is used to separate target signal from clutter in many radar signal processing. By suppressing clutter before CFAR detection, the detection performance can be improved. As a radar system designed, a design engineer generally takes averaged SNR and CNR into account and does not include the effect of MTI filter's frequency response. In practice, when the signals including clutter are pass through the filter, SNR is widely varying according to target velocity and CNR is also varying according to clutter center frequency and spectrum spreading. In this paper, we have derived the relationship between the MTI filter's frequency response and a target's velocity and a clutter's spectrum characteristics. With the variation of SNR and CNR at the filter output, the detection performance of CFAR has been analyzed by the simulation and has made certain of their influences on the performance.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.221-227
• /
• 2005

The presence of voids behind tunnel linings is very likely to result in settlement or structural collapse. One proposed method of detecting such voids by non-destructive method is radar. More than effectively judging the existence of voids behind tunnel linings, this study aims to develop the analysis algorithm of radar capable of estimation of the shape of specific voids. To acquire directional information and estimate the shape of three-dimensional voids, the radar of three-dipole antenna type is used. As a foundation to this ongoing research, an investigation of microwave polarization methods using three-dipole antenna carried out with various void orientations and void geometries. As a result, it is clarified that the response of four microwave polarization modes depends on void geometry and thus there is a possibility of identifying the geometry and orientation (the shape) of specific voids using radar of three-dipole antenna type.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.49-54
• /
• 2012

This paper presents a novel respiration rate estimation method based on joint amplitude and time of arrival (TOA) using impulse-radio ultra-wideband (IR-UWB) radar signals. Through analysis of the affect of body-rocking, it is shown that body-rocking information does not distort the respiration rate and exists at integer multiples of the body-rocking rate from the respiration rate. Based on the analysis, the convolution of the temporal sequence of the maximum amplitude and that of the TOA is proposed. The analysis results show that the frequency components of respiration are improved more than 10dB compared with those obtained using other existing methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.558-565
• /
• 2013

In this paper, modeling and simulation for performance analysis of high resolution SAR system has been carried out in the time, frequency and numeric domain using ADS Ptolemy simulation tool of Agilent corporation. SAR system consists of antenna, controller and transceiver. Error parameters affecting SAR system performances have been defined, modeled and simulated such as phase noise of frequency synthesizer, amplitude and phase characteristic of TWTA, sampling frequency of waveform generator and I/Q imbalance. Finally, the development requirements of SAR system based on the impulse response function have been derived.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1653-1660
• /
• 2016

The synthetic aperture rardar (SAR) is an active sensor using microwaves. It transmits a microwave signal, called a chirp pulse, and receives the reflected signal in a moving platform such as satellite and unmanned aerial vehicle. Since this sensor uses microwaves that can penetrate the atmosphere, SAR generates the images regardless of light and weather conditions. However SAR operates on the moving platform, the Doppler shift and the side-looking observation method should be considered. In addtion, a residual image or ghost image can be occurred according to selection of the pulse repetition frequency (PRF). In this paper, a range design of the PRF for the L-band spaceborne SAR system is studied for prevention of SAR image distortion. And the system is studied for prevention of SAR image distortion. And the system parameter and the PRF are calibrated iteratively according to the proposed system design procedure and design constraints. The MATLAB based on SAR system simulator has been developed to verify the validity of calculated PRF. The developed simulator assumes that SAR sensor is operated by the PRF calculated from the design. The results of the simulator show that the targets in image has a valid peak to side-lobe ratio (PSLR) so that the PRF can be used for the spaceborne SAR sensor.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.657-674
• /
• 2012

This paper presents the effect of spatially-distributed rainfall on both rainfall-sediment-runoff and erosion or deposition in the experimental Cheoncheon catchment: upstream of Yongdam dam basin. The rainfall fields were generated by three rainfall interpolation techniques (Thiessen polygon: TP, Inverse Distance Weighting: IDW, Kriging) based only on ground gauges and two radar rainfall synthetic techniques (Gauge-Radar ratio: GR, Conditional Merging: CM). Each rainfall field was then assessed in terms of spatial feature and quantity and also used for rainfall-sediment-runoff and erosion-deposition simulation due to the spatial difference of rainfall fields. The results showed that all the interpolation methods based on ground gauges provided very similar hydrologic responses in spite of different spatial pattern of erosion and deposition while raw radar and GR rainfall fields led to underestimated and overestimated simulation results, respectively. The CM technique was acceptable to improve the accuracy of raw radar rainfall for hydrologic simulation even though it is more time consuming to generate spatially-distributed rainfall.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.262-266
• /
• 2014

Military vehicle equipped with an antenna and a shelter for operating radar has a vibration exposure during driving time. This vibration would have influence on structure of military vehicle critically. In this paper, driving stability of the military vehicle is obtained through the vibration response analysis. And, vibration level of the military vehicle satisfied the military vibration specification through analysis and comparing the MIL-STD-810G. PSD and Grms data obtained by road test can be used for vibration test specification of cabinets and electronic equipment in shelter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.2
• /
• pp.19-27
• /
• 2001

All accurate and efficient antenna feed model is very important for computing GPR response using the FDTD method In literature, there are several feed models such as the equivalent network in angular-frequency domain, 1-D transmission-line cell， voltage boundary condition in time domain, etc. In this paper, theoretical relationship among the models is investigated. It is found that the above three models become equivalent when a short and lossless feed line can match with its connected transmitter receiver). In view of accuracy and efficiency of the simulation, the FDTD results according to the feed models arc compared with the measured data of the receiving responses for an actual GPR system.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.1-8
• /
• 1999

A complete electromagnetic simulation for a ground-penetrating radar(GPR) is implemented by employing 3-dimensional dispersive finite-difference time-domain(FDTD) method. The presented simulation model includes the cavity-backed bow-tie antennas, which are terminated by resistors. And an equivalent cirvuit consisting of the input impedance of the antenna and the characteristic impedance of the feed line is used to calculate the response in the receiving antenna. Actual emasurements of a GPR system including our manufactured bow-tie antenna pair are performed just above dry sand contained in a PVC tank. It is confirmed that the FDTD simulation results agree well with the actual measurement data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.94-102
• /
• 2018

In this paper, the wideband mono-pulse radar using AGC and limiter is designed. The output response characteristics of the mono-pulse radar using AGC and limiter are analyzed, respectively. In addition, the output response for jamming input signals is analyzed. The range tracking loop in the mono-pulse radar has robust output response to the noise jamming input signal. Although the output settling response of the AGC-based mono-pulse radar is larger than that of the limiter-based mono-pulse radar, the AGC-based mono-pulse radar has robustness to the noise jamming input signal due to feedback loop.