• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.10
• /
• pp.1081-1091
• /
• 1992

A new method for designing of WDF(Wave Digital Filter) is proposed, which is based on the digital dependent port adaptor transformed by the VGIC(Voltage Conversion Generalized Impedance Converter). To design the WD-LPF, WD-BPF, WD-HPF, or WD-BRF with CGIC(Current Conversion GIC). we have to use the different structure respectively. But the proposed method to design any types of WDF requires only one universal WDF structure, and this structure is attractive for its VLSI implementation for its simplicity.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1074-1080
• /
• 2020

This paper proposes a digitally controlled buck converter insensitive to process, voltage and temperature and capable of three modes of operation depending on the state of the output voltage. Conventional digital-controlled buck converters utilized A/D converters, counters and delay line circuits for accurate output voltage control, resulting in increasing the number of counter and delay line bits. This problem can be resolved by employing the 8-bit and 16-bit bidirectional shift registers, and this design technique leads a buck converter to be able to control duty ratio up to 128-bit resolution. The proposed buck converter was designed and fabricated with a CMOS 180 nano-meter 1-poly 6-metal process, generating an output voltage of 0.9 to 1.8V with the input voltage range of 2.7V to 3.6V, a ripple voltage of 30mV, and a power efficiency of up to 92.3%. The transient response speed of the proposed circuit was measured to be 4us.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.33-41
• /
• 2015

In this paper, the simplification procedure of Karnaugh Map, which is essential to design digital logic circuits, was implemented as web-based educational Java applets. The learners will be able to experience interesting learning process by executing the proposed Java applets. In addition, since the proposed Java applets were designed to contain educational technologies by step-by-step procedure, the maximization of learning efficiency can be obtained. The learners can make virtual experiments on the simplification of digital logic circuits by clicking on some buttons or filling out some text fields. Furthermore, the Boolean expression and its schematic diagram occurred in the simplification process will be displayed on the separate frame so that the learners can learn effectively. The schematic diagram enables them to check out if the logic circuit is correctly connected or not. Finally, since the simplification algorithm used in the proposed Java applet is based on the modified Quine-McCluskey minimization technique, the proposed Java applets will show more encouraging result in view of learning efficiency if it is used as assistants of the on-campus offline class.

• The Journal of the Acoustical Society of Korea
• /
• v.5 no.4
• /
• pp.37-45
• /
• 1986

초음파 Hyperthermia를 이용한 치료는 정상세포에 열적 손상을 주지 않으면서 종양 부위만을 적당한 온도로 가열하여야 하며 따라서 종양세포와 정상세포에 대한 정확한 초음파 세기조절이 필요하 게 된다. 본 논문에서는 초음파 Hyperthermia 용 변환기로서 초점거리와 가열범위를 전자적으로 쉽게 조절할 수 있는 동심환 배열 변환기를 설계하였으며 컴퓨터 모의 실험을 통해 그 성능을 예측하였다. 설계된 변환기는 유효직경 118mm, 동작주파수 320kHz 이며 배열 요소의 수는 12개이다. 그리고 이와 같은 동심환 변환기를 동작시키기 위해 카운터를 이용한 디지털 위상 조절 회로를 설계 제작하였으며, 실험 결과, 위상차를 갖는 신호를 발생시킬 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1753-1758
• /
• 2012

This paper introduces analog FIR filters based on a distributed amplifier and analyzes the proposed filter's characteristics. A simple design method of an analog FIR filter based on the digital filter design technique is also introduced. The proposed analog FIR filters are a moving average(MA) and a comb type filters with no multiplier. This simple structures of the proposed filters may enable to operate at multi-GHz frequency range and applicable to combine a filter and an amplifier of RF system. The proposed analog FIR filters were implemented with standard $0.18{\mu}m$ CMOS technology. The designed GHz analog FIR filters are simulated by Cadence Spectre and compared to the results of digital FIR filters obtained from MATLAB simulations. From the simulation results, the characteristics of the proposed analog FIR filters are fairly well matched with those of digital FIR filters.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2001

A new digital serrodyne (DS) signal processor for the close-loop fiber optic gyroscope was designed and implemented. It is based on a new algorithm that can solve the remaining problems of the existing digital serrodyne processing by utilizing a new modulation wavefonn. The algorithm was implemented in an FPGA and tested. Theoretical limit and experimental value of the random walk were measured to be 2.6 and 3.3 deg/hr/$\sqrt{Hz}$, respectively. And drift of the processor is smaller than that by Shupe's effect.effect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1349-1359
• /
• 1998

In this paper, presented is the result of a digital implementation of a FM stereo composite signal generator. The chip utilizing DDFS(Direct Digital Frequency Synthesizer architecture is implemented using $1.0\mu\textrm{m}$ CMOS gate-array technology thereby replacing analog componentry. To verify the process of generating composite signals a conventional logic simulation method was used. The processed chip was mounted on an evaluation PCB to test and analyze to signals. According to the measurement result obtained by using a 12-bit DAC, the digital FM composite signal generator produces a 74DB spectrally pure signal over its entire tuning range, which is superior to that of analog counterpart by 14dB in it spectral reponse. And further enhancements of the spectral response is expected to be achieved by using a high resolution digital to analog converter, such as a 16-bit DAC. The resulting signals is superior to the signal of the analoy circuitry typically used, in major characteristics such as S/N ratios, accuracy, tuning stability, and signal seperation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.635-641
• /
• 2004

This paper presents a new low-cost RF Built-In Self-Test (BIST) circuit for measuring transducer voltage gain, noise figure and input impedance of 5.25GHa low noise amplifier (LNA). The BIST circuit is designed using 0.18${\mu}{\textrm}{m}$ SiGe technology. The test technique utilizes input impedance matching and output transient voltage measurements. The technique is simple and inexpensive. Total chip size has additional area of about 18% for BIST circuit.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.521-527
• /
• 2020

Quantum-dot cellular automata (QCA) is a technology that attracts attention as a next-generation digital circuit design technology, and several digital circuits have been proposed in the QCA environment. Content-addressable memory (CAM) is a storage device that conducts a search based on information stored therein and provides fast speed in a special process such as network switching. Existing CAM cell circuits proposed in the QCA environment have a disadvantage in that a required area and energy dissipation are large. The CAM cell is composed of a memory unit that stores information and a match unit that determines whether or not the search is successful, and this study proposes an improved QCA CAM cell by designing the memory unit in a multi-layer structure. The proposed circuit uses simulation to verify the operation and compares and analyzes with the existing circuit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2633-2640
• /
• 2009

We design a small-area, low-power, and high-speed EEPROM for touch screen controller IC. As a small-area EEPROM design, a SSTC (side-wall selective transistor) cell is proposed, and high-voltage switching circuits repeated in the EEPROM core circuit are optimized. A digital data-bus sensing amplifier circuit is proposed as a low-power technology. For high speed, the distributed data-bus scheme is applied, and the driving voltage for both the EEPROM cell and the high-voltage switching circuits uses VDDP (=3.3V) which is higher than the logic voltage, VDD (=1.8V), using a dual power supply. The layout size of the designed 128-KBit EEPROMIP is $662.31{\mu}m{\times}1314.89{\mu}m$.