• Journal of Educational Research in Mathematics
• /
• v.21 no.1
• /
• pp.1-16
• /
• 2011

This study is to review division of whole numbers which is dealt in the revised elementary mathematics textbook and manual for teacher. The textbook and manual for teachers are most important documents to teach mathematics. And they are important to the would-be teachers who study the elementary mathematics with such documents. Therefore the textbook and manual for teachers should have no errors. But I found they have some errors and problems regarding division of whole numbers. In this paper, I discuss the problems and suggest the alternative plans.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.585-594
• /
• 2000

The exact path following of an autonomous mobile robot in a factory and an unreliable environment has many disadvantages in case of a classical control algorithm. In this paper, a neural network control approach based on an error back propagation algorithm is proposed for controlling a mobile robot to follow a line installed on the road. Since not only the three recognized informations from three sensors attached on a mobile robot but also the ten detailed informations in non recognition area are learned with input patterns, a mobile robot moves smoothly an installed line in spite of non perception space. The mobile robot has an effect of error minimization with a short time till a destination. To test an effectiveness of the proposed controller, the two motor velocity changes which is affected from a moving angle change of a mobile robot are simulated with computer.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.133-140
• /
• 1990

Analysis of cable structures is complex because their force - displacement relationships are highly nonlinear and also because large deformations introduce geometric nonlinearity. Therefore, we must take account their geometric nonlinearity in the analysis and find the equilibrated shape of cable structures. In this paper, to slove these problems, numerical procedures involving geometrical nonlinearity are introduced. They are applicable to general cable net, flexible transmission lines and suspended cable roof. These procedures are divided into two parts; one is to obtain the equilibrated shapes and stresses of the cable structures with uniform load by flexibility iteration method, the other is to analyse the equilibrated structures subjected to nodal external forces by nonlinear finite element method.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.113-118
• /
• 1992

The live loads acting on structures are generally computed in terms of equivalent uniformly distributed loads for the simplicity in design process. The loads, therefore, tend to decrease with increasing influence area in both load intensity and variance. Since multi-story column loads result from accumulation of loadings action on several different floors, its influence area becomes wider and lifetime maximum decreases. In the design codes proposing the design loads according to types of structural members(i.e., slabs, beams, columns), rather than the change of influence area, some proper reduction factors are given for columns which support more than one floor. Using the live load models developed for columns supporting single floor, in this study, the probabilistic characteristics of multi-story column loads are analyzed. In addition reduction factors given for multistory columns in current practice are calibrated.

• Composites Research
• /
• v.14 no.5
• /
• pp.26-37
• /
• 2001

After impact analysis of the composite cylindrical shells was performed. obtained outputs at 9 equally divided points of the shell were used as input patterns of the neural networks. Identification of impact loading characteristics was predicted simultaneously. Momentum backpropagation algorithm of neural networks which can modify the momentum coefficient and learning rate was developed and applied to identify the loading characteristics. Hidden layers of the backpropagation increased from 1 layer to 3 layers and trained the loading characteristics. Developed program with variable learning rate was converged close to real load characteristics under 1% error. Inverse engineering which identify the impact loading characteristics can be applicable to the composite laminated cylindrical shells with developed neural networks.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.80-85
• /
• 2002

A conveying fluid cantilever pipe system subjected to an uniformly distributed tangential follower force and three moving masses upon it constitute this vibrational system. The influences of the velocities of moving masses, the distance between two moving masses. and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a cantilever pipe system by numerical mettled. The uniformly distributed tangential follower force is considered within its ciritical value of a cantilever pipe without moving masses, and three constant velocities and three constant distance between two moving masses are also chosen. When the moving masses exist on pipe, As the velocity of the moving mass and distributed tangental force increases, the deflection of cantilever pipe conveying fluid is decreased, respectively. Increasing of the velocity of fluid flow make the amplitude of cantilever pipe conveying fluid decrease. After the moving mass passed upon the pipe, the tip displacement of pipe is influenced by the potential energy of cantilever pipe.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.1
• /
• pp.33-40
• /
• 2003

There are two basic concepts about concerning the buckling analysis of a buried pipe. One concept considers the soil around the pipe asn elastic continuum mediaum. The other concept holds that the pipe is sup ported by an elastic spring, which replaces the effects of the surrounding soil (the Winkler model). Theise buckling analysis is based on plane analysis, without considering the corrugation effect and the length effect. This paper thus presents a parametric study using the Finite Element Method (FEM) for the Winker model and proposes a buckling strength formula after examining a 3D analysis considering the corrugation effect and the length effect, thatwhichhelp in estimating the critical buckling strength of such CSP

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.85-92
• /
• 2002

To investigate the safety of the in-use vehicles emission against the tail-pipe emission regulation, in-use vehicles emission trend according to vehicle mileage should be known. But it is impossible to collect all vehicles emission data In order to know that. Therefore, it is necessary to establish a statistically meaningful inference method that can be used generally to estimate in-use vehicles emissions distribution according to the vehicle mileage with relatively less in-use vehicles emission data. To do this, a linear regression model that solved the problems of data normality and common variance of error was studied. As a way that can secure the data normality, In(emission) instead of emission itself was used as a sampled data. And a reciprocal of mileage was suggested as a factor to secure common variance of error. As an example, 36 data of FTP-75 test were handled in this study. As a result, using average value and standard deviation at each mileage which were inferred from a linear regression model, probability density distribution and cumulative distribution of emissions according to the vehicle mileage were obtained and it was possible to predict the deterioration factor through full useful life mileage and also possible to decide whether those in-use vehicles will meet the tail-pipe emission regulations or not.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.4 no.4
• /
• pp.22-29
• /
• 2013

Accumulation of more than 20,000,000 vehicles since the establishment of the quality of life and economic development needs several parking lots and cause crack problem in Korea. Related structures in large cities due to the lack of parking garage attached to secure underground parking structures are actively being built, and the basement parking lot will continue to increase more stories and the trend is expected to be larger. But so far, construction of the underground parking structure is related to a number of problems, including cracks in the structure. Therefore, in this study, repair, reinforcement and a few non-economic losses in the current design criteria are presented. The review of the structure used to current design criteria is to minimize crack and maximize usability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.2858-2864
• /
• 2012

The differential quadrature method (DQM) is applied to computation of the eigenvalues of in-plane buckling of the curved beams. Critical moments and loads are calculated for the beam subjected to equal and opposite bending moments and uniformly distributed radial loads with various end conditions and opening angles. Results are compared with existing exact solutions where available. The DQM gives good accuracy even when only a limited number of grid points is used. More results are given for two sets of boundary conditions not considered by previous investigators for in-plane buckling: clamped-clamped and simply supported-clamped ends.