• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.58-63
• /
• 1998

AMBIDEXTER(Advanced Molten-Salt Break even Inherently-Safe Dual-Mission EXperiment & TEst Reactor)는 토륨-우라늄 연료주기의 핵적자활성 요건을 설계하는 방법으로써 핵분열중간 생성물인 $^{233}$ Pa의 시간격리, 노내 방사성물질 농도저감, 잉여반응도 및 증식률향상을 위해 핵분열 생성물질의 온라인 정화.처리.재생 개념을 채택하고 있다. 본 연구에서는 AMBIDEXTER 로심의 핵분열성물질의 연소와 온라인 정화.처리에 따른 핵연료내 원소분포 변화를 기술하기 위해 핵분열생성물질의 평형포화농도에 대응하는 등가연소도(Equivalent Burnup)를 정의하고 이를 노심의 핵적자활성 요건에 대해 최적화하는 핵연료 정화공정의 시간상수 특성을 시뮬레이션 하였다. 핵분열생성물질농도의 동특성은 ORIGEN2 코드에 내장된 연속재처리 모델을 이용하여 해석하였으며 실용화가 입증된 후보정화공정들을 고려하여 모든 핵종을 5종의 핵종군으로 분류하여 평가하였다. 시뮬레이션 결과 유효정화주기를 0.1 (노심장전량/일)로 연속재처리 할 때 노심내 포화등 가연소도는 약 650 (MWD/TeH.E.)로 대응되며 이때 동일한 핵연료량으로부터 생성된 노내 핵분 열생성물질 평형농도는 최대연소도 33000MWD/TeU의 PWR 평형노심 BOC시의 대비해 약 1/10 에 해당하는 양이 잔유하는 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.4
• /
• pp.467-474
• /
• 2004

A numerical method and algorithms is proposed to perform optimization of non-linear response structures. An analytical and numerical method based finite element method is also proposed for the transformation of non-linear response into linear response. Loads transformed from this method are defined as the equivalent linear loads. With the loads and the transformed response, linear static optimization is performed for nonlinear response structure with geometric and/or material non-linearity. The results of the optimization are compared with them of typical non-linear response optimization using finite difference method. The proposed method is very efficient and derives good solution.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.999-1004
• /
• 2004

A numerical method and algorithms is proposed to perform optimization of non-linear response structures. An analytical and numerical method based finite element method is also proposed for the transformation of non-linear response into linear response. Loads transformed from this method are defined as the equivalent linear loads. With the loads and the transformed response, linear static optimization is performed for nonlinear response structure with geometric and/or material non-linearity. The results of the optimization are compared with them of typical non-linear response optimization using finite difference method. The proposed method is very efficient and derives good solution.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.190-194
• /
• 2016

자연에서 안정적이고 경제성이 높은 구조로 벌집 구조가 많이 언급이 된다. 이러한 벌집 구조의 특징으로 인해 많은 공학자들이 그 구조를 모방하여 적용하고 있다. 벌집 구조에도 다양한 종류가 존재하지만 그 중 음의 푸아송 비(Poisson's ratio)를 갖는 Chiral Honeycomb 구조가 많이 연구되고 있다. 푸아송 비는 물질이나 구조의 고유한 물성치로 종, 횡 방향의 변형율로 나타내며 이 값으로 외부 조건으로부터의 변형을 예측 할 수 있게 된다. 흔히 푸아송 비는 양의 값을 가지지만 Chiral Honeycomb 구조는 음의 푸아송 비를 가져 기존의 구조와는 다른 기계적 성질을 가지게 된다. 이 논문에서는 Chiral Honeycomb 구조 중에서도 4개의 관절(ligament)를 가지는 Tetra Chiral Honeycomb 구조에 대해 EDISON용 CASADsovler 프로그램을 통해 유한 요소 해석을 수행하여 등가 물성치를 구해 보았으며 기존 실험의 값들과 비교를 통해 해석을 위해 필요한 적절한 대표 체적에 대해 확인해 보았다.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.550-557
• /
• 1999

This Analysis was conducted for 13 toxic-PCBs having TEF value among 209 PCBs isomers in sediment by isotope dilution HRGC/HRMS method. From the result, the recovery of surrogate standard was in the range of 71~99%. The concentration range for 13 toxic-PCBs in sediment was found to be 0.84~2.49 ng/g, among them the concentration levels of 2,2',3,3',4,4',5-HpCB(IUPAC No. 170) and 2,2',3,4,4',5,5'-HpCB(IUPAC No. 180) represented almost 50% of total concentrarion and that of 2,3,4,4,5-PeCB(IUPAC No. 114) showed over 10%. The TEQ concentration levelwas in the range of 0.38~2.63 pg-TEQ/g and 3,3',4,4',5-PeCB(IUPAC No. 126) concentration represented over 50% of total TEQ concentration.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.2
• /
• pp.51-61
• /
• 2002

In this research, a numerical algorithm is developed for the response analysis of burined pipelines considering longitudinal permanent ground deformation(PGD) due to liquefaction induced lateral spreading. Buried pipelines and surrounding soil are modeled as continuous pipelines using the beam elements and a series of elasto-plastic springs represented for equivalent soil stiffness, respectively. Idealized various PGD patterns based on the observation of PGD are used as a loading configuration and the length of the lateral spread zone is considered as loading parameter. Numerical results are verified with other research results and efficient applicability of developed procedure is shown. Analyses are performed by varying different parameters such as PGD pattern, pipe diameter and pipe thickness. Through these procedures, relative influences of various parameters on the response of buried pipeline subject to longitudinal PGD are investigated.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.194-201
• /
• 2017

Silla Great Bell was made to reproduce King Seongdeok Divine Bell and it was restored to have the same structure and patterns. The most difficult problem was to reproduce the magnificent striking sound and dynamic hum tone with strong beat like in King Seongdeok Divine Bell. Especially, beating sound is attributed to the uncontrollable asymmetry occurring in the casting process, so it can not be predicted or controlled before casting. In this study, we introduce the method and process to make Silla Great Bell have a strong beat with a proper period. Position conditions of mode pairs and striking point for a strong beat were identified. Bell thickness was locally decreased to make proper period of beat. The process was performed according to the simulation result of an equivalent bell model. As a result, the original weak and long beat was made to a strong beat with a proper period.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.852-860
• /
• 2003

We introduce the error models for an attitude determination system(ADS) with gyroscopes and stellar sensor. The ADS error models are derived according to the definition of the reference frame and of the attitude error. The equivalent error models applicable to the attitude determination system with large attitude errors are presented. The simulation results show that the proposed error models improve performance of the attitude determination system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.216-222
• /
• 1996

This paper presents a computational technique to predict roof crush resistance in early design stage of passenger car development. This technique use a simple F.E. model with nonlinear spring elements which represent plastic hinge behavior at weak areas. By assuming actual sections as equivalent simple sections, maximum bending moments which weak areas in major members can stand are theoretically calculated. Results from prediction of roof crush resistance are correlated well with test results.

• Korean Journal of Ecology and Environment
• /
• v.37 no.1 s.106
• /
• pp.102-105
• /
• 2004

Larvae of two heptageniid mayflies, Iron martinus Braasch and Sold${\acute}$n and Iron longitibius sp. n., are described from Vietnam. The larva of I. martinus is distinguished by the paired spines on the abdominal segments 1-9; the larva of I. longitibius sp. n. is distinguished by the relatively long foretibiae. Their descriptions, diagnoses, line drawings of key characters, material examined, distributions, and habitat and biology data are provided.