• Journal of the Korean Geotechnical Society
• /
• v.26 no.9
• /
• pp.25-35
• /
• 2010

Settlement at reclamation area caused by secondary compression should be considered using spatial evaluating method because the thickness of consolidation layer varies at every location. Probabilistic method can be implemented to evaluate uncertainty of spatial distribution of secondary compression. This study spatially evaluated mean and standard deviation of secondary compression in the overall analyzing region using spatial distribution of consolidation thickness estimated by ordinary kriging method and statistical values of soil properties. And then, the area where secondary compression exceeds a design criterion at the specific time was evaluated using probabilistic method. It was observed that the area exceeding the design criterion increased as the variability of $C_{\alpha}/(1+e_o)$ increased or the probabilistic design criterion 0: decreased. It is considered that the probabilistic method can be used for the geotechnical design of soft ground when a probabilistic design criterion is established in the specification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1890-1897
• /
• 2022

In this paper, we design a navigation filter for an underwater glider. Underwater gliders are low-cost, reusable, and can be used for a long time. Two types of filters are designed considering characteristics such as small size, low cost, and low power. The navigation filter estimates the reference velocity of the underwater glider's body frame based on the minimum sensor output. The sensor configuration of the first filter consists of an accelerometer, a magnetometer, and a depth sensor. the second filter include extra a gyroscope in the same configuration. The estimated velocity is fused with the attitude, converted into the velocity of the navigation frame and finally the position is estimated. To analyze the performance of the proposed filter, analysis was performed using Monte Carlo numerical analysis method, and the results were analyzed with standard deviation (1σ). Standard deviations of each filter's position error are 334.34m, 125.91m.

• Science of Emotion and Sensibility
• /
• v.10 no.2
• /
• pp.169-175
• /
• 2007

This study surveys the variation of the physical properties such as denier, tensile property and thermal shrinkage between seven domestic and foreign PET filaments manufactured by China and Taiwan. For this purpose, the specimens prepared were PET POY 239d/96f made in china, and PET POY 255d/48f made in Korea as a coarse filament. As a fine filament, 120d PET POY made by Taiwan, China and 6 domestic companies were prepared. The various physical properties such as yarn denier, yarn mechanical property and wet and dry thermal shrinkages were measured according to the each layer divided by 50,000m of the cake, and between and within yarn physical properties were analysed and discussed with the domestic and foreign yarns. These results provide fundamental data to the SME related to the yarn finishing and weaving for developing high added-value and high sensitive fabrics.

• Physical Therapy Korea
• /
• v.10 no.4
• /
• pp.85-94
• /
• 2003

본 연구에서는 근골격계 통증이 자세유지와 균형능력에 핵심이 되는 중력중심 이동에 미치는 영향에 대해 알아봄으로서, 균형과 자세에 영향을 주는 다양한 요소들에 대한 새로운 접근을 시도해 보고자 한다. I-병원의 입원 및 외래 환자 중 신경계 손상이 없고 중력중심 이동에 직접적인 영향을 줄 수 있는 하지에 정형외과적 장애가 없으며, 전정계 손상이나 시력장애로 인한 균형에 문제가 없이 근골격계 질환으로 요통과 견통을 주소로 하는 71명의 환자(남자 38, 여자 33; 평균연령=44, 표준편차=13.8, 범위=19~79)와 신경계, 근골격계 및 평형감각에 문제가 없는 정상인 30명의 대조군(남자 16, 여자 14; 평균연령=39.2, 표준편차=13.7, 범위=21~72)을 대상으로 전산화된 힘판을 이용하여 중력중심 이동의 궤적을 표준편차값으로 측정하였다. 측정된 중력중심 이동값은 두 군간에 상이한 차이를 보이고 있음이 검증되었다(p<.01). 또 측정된 여러 변수들의 중력중심 이동에 대한 영향력을 알아보기 위해 나이, 체중 및 신장과 중력중심 이동과의 상관분석 결과 중력중심 이동의 15.8%를 체중의 변화에 의한 것으로 설명할 수 있다는 결과를 얻었으며, 그 외의 변수들과의 연관성에 대해선 유의미한 차이가 없었다(p<.01). 결과적으로 근골격계 통증은 올바른 자세유지와 균형유지를 위한 감각통합과 반응과정에 직접, 간접적으로 영향을 미치고 있다. 따라서 중력 중심 이동이 크면 클수록 중심을 잡기 위한 근육활동으로 추가적인 에너지가 사용되고, 편중된 중력중심 이동은 근골격계에 무리한 부담을 주어 통증을 증가시킬 수 있을 것이다. 또 통증으로 인한 중력중심 이동은 이를 보상하기 위해 신체 먼 곳에서의 이차적인 변형을 초래하여 각종 근골격계 증상의 원인이 될 수 있으므로 근골격계에 대한 적절한 치료는 통증을 감소시켜 자세의 이차적인 변형을 막고 자세유지 시 작용하는 근육의 에너지 효율을 높일 수 있을 것으로 사료된다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.422-428
• /
• 2009

NAND flash memory is widely used in embedded systems because of many attractive features, such as small size, light weight, low power consumption and fast access speed. However, it requires garbage collection, which includes erase operations. Erase operation is slower than other operations. Further, a block has a limited erase lifetime (typically 100,000) after which a block becomes unusable. The proposed garbage collection policy focuses on minimizing the total number of erase operations, the deviation value of each block and the garbage collection time. NAND flash memory consists of pages of three types, such as valid pages, invalid pages and free pages. In order to achieve above goals, we use a page ratio to decide when to do garbage collection and to select the target victimblock. Additionally, we implement allocating method and group management method. Simulation results show that the proposed policy performs better than Greedy or CAT with the maximum rate 85% of reduction in the deviation value of the erase operations and 6% reduction in garbage collection time.

• Nuclear Engineering and Technology
• /
• v.18 no.1
• /
• pp.17-26
• /
• 1986

A test is made for a method to determine reliable bias in the criticality safety analysis of spent fuel storage pool with turnup credit between the reference and rack criticality calculation methods. The spent fuel pool of Kori Unit 1 is conceptually redesigned to the most compact rack with turnup credit, and its multiplication factors are calculated depending on fuel enrichment and burnup, by the Monte Carlo code KENO-IV as a reference and by a two-dimensional collision probability code FATAC as a practical method. Then, the computed values with the help of the above two computer codes are compared to evaluate the bias and its trend in terms of multiplication factor on fuel enrichment and turnup. The result indicates that the bias can be determined with reliability basis but without any disadvantage in criticality safety margin compared with the conventional method.

• Journal of KIISE:Software and Applications
• /
• v.30 no.11
• /
• pp.1062-1071
• /
• 2003

A genre-based classification means classifying documents by the purpose for which they were written, not by the semantics or subject areas. Most genre classifying methods in the past were based on the existing documents categorization algorithms and ineffective for feature selections, resulting in low quality classification results. In this research, we propose a new method for automatic classification of digital documents by genre. The genre classifier we developed uses the deviation statistic between the genre-revealing term frequencies and between the subject-revealing term frequencies within a genre. We collected Web documents to evaluate the proposed genre classification method. The experimental results show that the proposed method outperforms a direct application of a kai-square feature selection and bayesian classifier often used for subject classification by proving an excellent accuracy of about 30 percent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.6
• /
• pp.675-681
• /
• 2019

Noise removal is a pre-requisite procedure in image processing, and various methods have been studied depending on the type of noise and the environment of the image. However, for image processing with high-frequency components, conventional additive white Gaussian noise (AWGN) removal techniques are rather lacking in performance because of the blurring phenomenon induced thereby. In this paper, we propose an algorithm to minimize the blurring in AWGN removal processes. The proposed algorithm sets the high-frequency and the low-frequency component filters, respectively, depending on the pixel properties in the mask, consequently calculating the output of each filter with the addition or subtraction of the input image to the reference. The final output image is obtained by adding the weighted data calculated using the standard deviations and the Gaussian distribution with the output of the two filters. The proposed algorithm shows improved AWGN removal performance compared to the existing method, which was verified by simulation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.180-183
• /
• 1990

The variability of ambient noise with time and water depth is measured in the coastal water of Pusan. The Noise Spectrum levels are relatively high, and have standard deviations amounting to 3 to 4 dB with time and 2 to 3 dB with water depth in the B area of high ship activity. On the other hand, in the A area where shipping is sparse the standard deviations are only 1 to 2 dB with time and water depth respectively. These results show that ship traffic is one of the dominent sources at frequencies greater than 500Hz.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.441-453
• /
• 1994

Two extraction methods, liquid-liquid extraction(LLE) and solid-phase extraction(SPE), coupled with GC/MS were compared as preconcentration procedures for priority pollutants in water. Among the semi-volatile priority pollutants, 11 acid and 44 base/neutral compounds were spiked in reagent water. With LLE, which is a modification of EPA Method 625, the overall mean recovery of the 54 compounds was 91% with a mean relative standard deviation(RSD) of 4.6%. With SPE, the overall mean recovery of the 52 compounds was 53% with a mean RSD of 8.9%. The detection limits of both methods were in the range of $1{\sim}5{\mu}g/l$.