• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.7 no.1
• /
• pp.15-20
• /
• 2011

A person with neurological disorder is defined as a person with limitation of ambulation or basic life activity due to the cerebral palsy or traumatic brain damage, stroke. Recently, the DMFT of the children with neurological disorders is similar or lower than the DMFT of the children with no disability. But, this article is about the severe-early childhood caries in children with grade 1 neurological disorder. It is supposed that the primary motor impairment and secondary physical weakness, frequent hospitalization, sugar- rich food and drugs, lack of oral care, delayed dental visit made high caries susceptibility. In case of treatment of the children with severe neurological disorders, dentists should make a thorough caries preventive plan based on individualized caries risk assessment. Also parents and medical doctors should recognize the importance of oral care and do the early dental visit and home care.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.9-18
• /
• 2006

This paper presents a Monte-Carlo based method to obtain a probability of interference in the 900MHz passive RFID systems. We show an efficient algorithm to calculate not only in-band interference due to unwanted emission of interfering sources for a given emission mask, but out-of-band interference, which depends on the blocking performances of a victim receiver filter. We next apply the proposed method to two types of RFID systems, one is to use simple FHSS and the other to adopt a hybrid use of FHSS and LBT, which senses the channel before transmission. Simulation is first performed with a SEAMCAT. We next make simulation with a MATLAB software which implements SEAMCAT algorithm and show both results from two softwares are similar.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.630-637
• /
• 2018

To supply a high voltage to an inverter, a motor control unit (MCU) generally employs a front-end boost converter. Because it generates a high output voltage, the converter needs an output capacitor, which has a high working voltage resulted in cost increasing. To solve this problem, we present a bidirectional dc-to-dc converter, which can decrease a working voltage of the output capacitor. Basic characteristic of the proposed converter is similar to a conventional boost converter. A difference comes from the structure of the output terminal connecting an output capacitor and an input battery in series. Owing to this circuit configuration, the working voltage of the output capacitor becomes lower than that of a conventional boost converter. After theoretical analysis, we carry out simulations and experiments to verify the validity and performance comparing with a conventional boost converter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1199-1205
• /
• 2006

This paper proposes a wideband monopole antenna with improved band rejection characteristics by inserting two band notch slots with half wavelength in radiator. The designed antenna is composed of bow-tie patch fed electromagnetically with parasitic ground patch of a semicircular shape. We obtained band rejection filter-like characteristics by controlling coupling amounts between two horizontal resonance slots. Using this technique, we achieved the broad rejection bandwidth and improved skirt characteristics compared with only one notch slot. The measured bandwidth is from 2.7 GHz to 6.9 GHz for VSWR below 2.0 except the limited band of $4.96{\sim}5.51GHz$. This antenna shows a similar radiation pattern of the ideal monopole and the radiation gain reduction is more than $5{\sim}10dB$ on the x-z plane at rejection frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.493-500
• /
• 2008

This paper describes a design of internal frequency modulation(FM) radio antenna fur mobile terminal. In order to control of impedance at an operating frequency of the designed antenna, the lumped constant elements of R and L chip components are used. Patch and stubs located at antenna backside are added to control an exact resonance frequency and miniaturization. A fabricated antenna sire, the measured return loss, impedance, bandwidth, and gain are $40{\times}70{\times}1$ mm, -23 dB at 99 MHz, $55-j7{\Omega}$, 22 MHz($88{\sim}110$ MHz) below -10 dB, and -15 dBi, respectively. These measured results show a good agreement with simulated results. Especially, the measured gain of fabricated antenna is similar with value of a conventional ear-phone antenna in the designed frequency band. The measured radiation pattern agrees well with the calculated omni-directional pattern.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1360-1366
• /
• 2008

This paper proposes a printed yagi-antenna available at 2.45 GHz, for the remote-management system of the underground equipment. To improve the solidity and waterproof property, the proposed antenna is coated with bakelite. The manufactured antenna is operated at $2.15{\sim}2.52\;GHz$, whose gain measures 10 dBi. These results are a little different from those of the simulated antenna, but the trend is totally similar. Developed antenna is expected to be useful in the underground facility.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.940-946
• /
• 2010

In this paper, we proposed the internal antenna on PCB(Planar Circuit Board) for achieving WWAN(Wireless Wide Area Network) operation in the laptop computer. The proposed antenna has a metal structure instead of printed pattern on PCB to improve the antenna characteristics for GSM850/900 bands. Compared to PCB embedded antenna without metal structure, the proposed antenna occupies similar area of $74{\times}11{\times}0.5\;mm^3$ with before and the bandwidth of the proposed one for GSM850/900 bands is increased 13 MHz than before. Further we confirmed that the proposed antenna has higher radiation gain of -4.45~-2.29 dBi for GSM850/900 bands than PCB embedded antenna without metal structure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1145-1160
• /
• 2009

In this paper, a dual band microstrip antenna with soft surface for gapfiller applications is proposed. The proposed antenna with similar radiation pattern and gain is fabricated on RO4003 substrate with a dielectric constant of 3.38 and a thickness of 0.508 mm, and operates in IEEE 802.11a/b bands. The size of the antenna is $50{\times}56.5{\times}5.5\;mm^3$ and the ground plane size including soft surface structure is $175.0{\times}154.4\;mm^2$. The antenna is fed by coaxial cable. The simulated bandwidths of the antenna are 2.388~2.493 GHz and 5.561~6.051 GHz for VSWR<2. The gains are 10.63 dBi and 10.33 dBi, respectively, for the lower and upper bands.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.80-91
• /
• 2002

An on-line ultrasonic detector was developed to continuously monitor the ultrasonic signal due to partial discharge in transformer in service. The on-line ultrasonic detector has a band-pass filter designed to measure only the frequencies from 50 to 300[㎑] of ultrasonic signal, to remove electrical and mechanical noises from outside of the transformer, and tlle ultrasonic sensor contains a pre-amplifier with 60[dB] gain. The ultrasonic signal discrimination algorithm which discriminates the ultrasonic signal duration was developed to remove the ultrasonic signal due to OLTC operation having similar characteristics to those due to partial discharge. The reliability of the on-line ultrasonic detector developed in this study was convinced of measurement the ultrasonic signals from the model. transformer in laboratory and transformer in service.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.500-507
• /
• 2012

The purpose of this study was to investigate the effects of medicine ball throwing for weight shift training, that make improvements on golf physical fitness and performance. This training was related to physical fitness and golf performance in beginner golfer, undergraduates 20 males(10 exercise groups, 10 control groups) during 10 weeks. Variables were strength, flexibility, headspeed and distance. Training course were devided 2 sessions. In 1 to 5 weeks, using 3kg medicine ball, in 5 to 10 weeks, using 5kg medicine ball. Throwing method imitated golf swing, address, backswing, follow-through by throwing medicine ball. The Results were as follows; Medicine ball throwing for weight shift training showed significant difference in strength, flexibility, headspeed and distance in Exercise Group statistically. In conclusion, Medicine ball throwing for weight shift training improved strength, flexibility, headspeed and distance. So, it could be considered very effective training method as warming-up and main exercise.