• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.159-167
• /
• 2022

The present study assessed the micro structure and durability characteristics of ternary blended cement with different types of alkali activators. Ground granulated blast furnace slag(GGBS) and ferronickel slag(FNS) was replaced until 50 % of the weight of cement. In addition, potassuim hydroxide and sodium hydroxide were used for comparing the properties of different type of alkali activator. Ternary blended cement with alkali activators showed higher peak portlandite peak than that of OPC(Ordinary Portlande Cement) and non activated ternary blended cement. Also, there was no new hydration products in ternary blended cement or/and alkali activators. Based on the mercury intrustion porosimetry(MIP) test result, ternary blended cement increased macro pore while alkali activated ternary blended cement modified pore structure and increased microp pore as compared to OPC as control. Combination with alkali activators is desirable to enhance the compressive strength and freeze thaw resistance.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.349-357
• /
• 2003

Hydrogels for wound dressing from a mixture of poly(vinyl alcohol) (PVAL), poly(N-vinyl pyrrolidone) (PVP), hexylene glycol (HG) and chitosan were made. The hydrogels were obtained by physical crosslinking of freezing and thawing, chemical crosslinking of irradiation, and irradiation after freezing and thawing of mixture solutions. The solid concentration of PVAL/PVP/HG/chitosan was 15 wt%. The concentration of chitosan was 0.3 wt%, and the ratio of PVAL/PVP was 6:4. The concentration of HG was in the range of 1∼5 wt%. The number of repeated freezing and thawing was in the range of 1∼3 times, and gamma irradiation doses were 25, 35 and 50 kGy. The physical properties such as gelation, water absorption and gel strength of hydrogels were examined. Gel content and gel strength decreased as HG concentration increased, whereas degree of swelling increased. Gel content and gel strength increased as irradiation dose and the number of freezing and thawing increased, whereas degree of swelling decreased. The hydrogels were evaluated for the healing effect for animals and for the antibacterial effect.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.1
• /
• pp.89-96
• /
• 1992

It is generally known that the frost-resistance of concrete is much affected by the air content in concrete and by the air void system or air distribution. And also the frost-resistance is believed to vary with the stre¬ngth of concrete. This article is prepared to describe, based on experiment, the effect of the air content and the air void system, particularly the effect of the spacing factor, on the freeze-thaw resistance of the high strength conc¬rete. For this purpose, I first worked on Non-AE concrete to make its compressive strength set about 400 to 500 kg/em'. However, the freeze-thaw test on the Non-AE concrete resulted in low durability factor, I.e., 10-2~0%. Thus to enhance the durability, another supplementary step was needed. I used AE admixture. which enhanced durability by changing the air content from 2% to 12%. The frost-thaw test was then performed 500 cycles on the 20 kind of concrete mixtures which differ in unit cement content and in water-cement ratio. Keywords : frost -resistance, air content, air void system, air distribution, spacing factor, freeze-thaw test, dur ability factor. capillary cavity, Linear Traverse Method.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.143-151
• /
• 2022

In this study the relative dynamic modulus and surface rebound hardness measurement methods were used for comparison to predict the occurrence of frost dam age on the concrete. From the test results, it was observed that the initiation of concrete dam age predicted by surface rebound hardness values was 200 cycles quicker than that of the relative dynamic modulus method in the W/C 70 specimens. In addition, it continuously provided data that showed the frost damage development of concrete surfaces according to increasing freeze-thaw cycles. This indicated that the frost dam age of the concrete could be found from the initial point of its occurrence by the surface rebound hardness measurement method. Similar results were also observed in W/C 60 and 50 specimens. Therefore, it is considered that surface rebound hardness method predicted the freeze-thaw damage well, regardless of water-cement ratio.

• Korean Journal of Animal Reproduction
• /
• v.24 no.1
• /
• pp.89-95
• /
• 2000

This study was to establish an effective dilution technique in a vitrification of bovine blastocysts for the field trial. For vitrification, blastocysts were exposed in glycerol (G) and ethylene glycol (EG) mixture in m-DPBS supplemented with 10% FBS. Blastocysts were first exposed to 10% (v/v) G for 5 min, and subsequently were transferred to 10% G plus 20% EG (v/v) for 5 min. Finally, embryos were transferred to 25% G plus 25% EG (v/v) for 30 see and were placed in nitrogen vapor for 3 min, and then were plunged into L$N_2$. At thawing, the straw containing blastocysts was placed in air for 10 sec, and then plunged into a water bath at $25^{\circ}C$ until all ice had disappeared. They were placed in $25^{\circ}C$ and 36$^{\circ}C$ water according to treatment group for different time. Also, in vitro survival was assessed by the re-expansion and hatched rates at 24 hand 48 h postwarming, respectively. The results obtained in these experiments were summarized as follows; 1) In the survival rates of vitrified bovine blastocysts according to different dilution time at thawing, the data of 1 min group (86.6, 56.6%) were higher than those of other treatment groups (2 min; 93.5, 35.4%, 2.5 min; 76.9, 30.7%, 3 min; 88.8, 36.1% and 3.5 min; 83.7, 8.1%). 2) When the in vitro survival of vitrified groups according to different developmental stage was examined at 48 h after thawing using 1 min dilution method, the hatching rates of fast developed embryos (expanded blastocyst: 81.3%: early hatching blastocyst: 86.2%) were higher than that of delayed developed one (early blastocyst: 46.6%). 3) In addition, when the in vitro survival of vitrified groups according to different embryo age was compared, the hatched rates at 48 h after thawing of Day 7 (66.6%) and Day 8 embryos (60.0%) were significantly higher than that of Day 9 embryos (22.7%) (P＜0.05). These results demonstrate that vitrified bovine IVM/IVF/IVC blastocysts can be successfully survived in vitro using one-step dilution (1 min) method.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.255-262
• /
• 2006

The purpose of this study is to investigate the effects of vitrification in open pulled straws (OPS) methods on in vitro survival ability of porcine embryos. For in vitro maturation of immature oocytes, the porcine ovaries were collected from local slaughter-house. The cumulus-oocytes complexes were aspirated from 2 to 6 mm follicles. The collected oocytes were cultured for in vitro maturation in NCSU-23 medium with 5 mM hypotaurine, 0.57 mM cysteine, 10% porcine follicle fluid, 10 IU/ml PMSG and 10 IU/ml hCG for $21{\sim}22$ hrs. Then, the oocytes were more cultured $21{\sim}22$ hrs in vitro maturation in medium removed hormones. The frozen-thawed spermatozoa were washed by centrifugation 2 times for 10 min at 1,500 rpm in D-PBS with 5.56 mM glucose, 0.33 mM Na-pyruvate, 100 IU/ml penicillin, $100 {\mu}g/ml$ streptomycin and 4 mg/ml BSA. The fertilization medium used mTBM with 2 mM caffeine and 2 mg/ml BSA and adjusted to a pH of 7.2 to 7.4. The final concentration of spermatozoa was adjusted to $2.5{\times}10^6$cells/ml motile sperm during fertilization in vitro. At 8 hrs after insemination, the oocytes were transferred into NCSU-23 medium with 5.0 mM hypotaurine, 4 mg/ml BSA and 10 ng/ml EGF and cultured for 7 days. When the blastocysts of different stages were frozen-thawed by OPS methods, the proportions of embryos with normal morphology were significantly (p<0.05) higher in embryos frozen-thawed at expanded blastocyst stage (38.9%) than in early blastocyst stage (28.3%). On the other hand, the proportions of embryos damaged after frozen-thawing were significantly (p<0.05) higher in embryos frozen at early blastocyst stages than in expanded blastocyst stage. In another experiment, the normal embryos morphology after frozen- thawing were further cultured for 48 hrs. After culture, the proportions of embryos hatched were 6.7, 20.0 and 33.3% for embryos frozen-thawed at early blastocyst, mid-blastocyst and expanded blastocyst stages. These finding indicate the possible broader application for OPS methods, as frozen-thawed embryos may be accompanied by developmental stage according to requirements of the survival ability after freezing of blastocyst stage in the pig.

• Journal of Embryo Transfer
• /
• v.18 no.3
• /
• pp.195-201
• /
• 2003

This study was carried out to establish most suitable freezing condition, to evaluate the different condition of freezing and thawing rates on the viability and motility of frozen canine spermatozoa. The ejaculated semen was added to obtained 200∼400 ${\times}$ 10$^{6}$ /$m\ell$ with extender I and was cooled to 4$^{\circ}C$ over 30, 60 and 120 minutes. And then, semen was diluted with extender II containing 4, 6 and 8％(v/v) glycerol for 60 min, respectively and packaged in 0.5$m\ell$ straw, equilibrated far 30, 60 and 120 min at 4$^{\circ}C$ and cryopreserved in liquid nitrogen vapor at different distance(3, 5, 7 and 9 cm, respectively), plunged into nitrogen tank. Samples were thawed by placing straws into 27, 37, 47, 57$^{\circ}C$ water bath for 120, 20 and 12 sec, respectively. The results were as follows; 1. The survival and motility rate immediately post-thawing was significantly higher in samples frozen in 4％ glycerol than 6 or 8％ glycerol(P< 0.05). 2. According to equilibration time at 4$^{\circ}C$, the survival and motility rate immediately post-thawing was significantly higher in samples frozen after 60 min equilibration than 30 or 120 min equilibration(P<0.05). 3. Freezing in distance of 5 cm from liquid nitrogen yield better survival and motility rate than the others(3, 7 or 9 cm)(P<0.05). 4. The effect of thawing rate on sperm survival were higher when the thawing was done at 37$^{\circ}C$ for 120 sec(P<0.05).

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.303-305
• /
• 2002

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.1
• /
• pp.41-49
• /
• 1996

본 연구는 체외수정에 의해 생산된 생쥐 배반포기배를 vitrification 방법으로 동결보존하였을때 높은 생존율을 얻기 위한 적정조건을 검토하고자 실시하였다. 배반포기배를 생산하기 위하여, B6CBA F1 (C57BL/6, (표현불가)${\times}CBA/N$, (표현불가)) 계통의 생쥐 미수정란에 $1{\times}10^6$ spermatozoa/ml 농도의 정자로서 수정을 유도하였으며, 이후 $37^{\circ}C$, 5% $CO_2$배양기내에서 96시간동안 체외배양하였다. 배양 4일째의 배반포기배는 발달상태에 따라 early, middle 그리고 hatching blastocysts로 구분하였다. 본 실험에 사용된 동결보존액은 30% Ficoll과 0.5mol의 sucrose가 첨가된 mDPBS 용액에 40%의 ethylene glycol를 첨가한 EFS 40 (Zhu et al., 1993) 이었고, 수정란은 $25^{\circ}C$의 상온에서 먼저 20% ethylene glycol에 노출된 후 EFS 40 용액으로 옮겨 액체질소에 침지하는 2단계 동결법에 의해 동결보존되었으며, 급속융해하여 다음과 같은 결과를 얻었다. 1. 체외수정율과 배양 4일째 배반포기까지의 배발달율은 각각 89.4%와 86.1%였다. 2. 20% ethylene glycol에서 5분간 평형된 후 EFS 40 용액에 냉동보존된 후 융해된 난자의 생존율은 20% ethylene glycol에 0, 1, 3분간 평형된 난자의 생존율에 비해 유의하게 높았다. 3. 배반포기배를 20% ethylene glycol에서 5분간, EFS 40 용액에 1분간 차례로 노출한 다음 체와배양하였던 바, 배양 24시간째 생존율은 $82.9%{\sim}88.4%$ 였다. 본 연구 결과, 체외수정, 배양된 생쥐 배반포기배는 20% ethylene glycol과 EFS40에 대한 노출만으로는 난자의 생존성에 나쁜 영향을 미치지 않는 것으로 미루어 보아 배반포기배의 초자화 동결이 가능함을 시사하였다. 따라서 동결 융해 후 높은 생존율은 상온에서 난자를 2단계 즉, 20% ethylene glycol에 5분간 평형시킨 후 EFS 40 용액에 노출하여 1분내에 LN2에 직접 침지하는 간편한 동결방법으로 얻을 수 있었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.31-39
• /
• 2013

In this study, performance of the post-installed anchor system was evaluated with reduced strength of concrete and anchor. One of the post-installed anchors was selected to performance evaluation. Concrete strength was reduced by freeze-thawing test, and the post-installed anchor strength was reduced by corrosion test. The post-installed Anchor was installed in concrete of freezing and thawing and original concrete, and corroded anchor was installed in original concrete only. Anchor diameter and installation depth of the anchor were the variable for each specimen. Performance of post-installed anchor system of each specimen was evaluated by pullout test. Anchor diameter and installation depth of anchor, it may affect the performance of the post-installed anchor system from the experimental test results. Fracture mode of each post-installed anchor system had occurred differently depending on the durability of concrete and anchor. The anchor pullout strength from the experimental test results was used in order to compare with the results of CCD (Concrete Capacity Design) method, and CCD equation was modified. Modified equation was able to predict the anchor pullout strength of post-installed anchor system in Original concrete and freezing and thawing of concrete.