• Korean Journal of Remote Sensing
• /
• v.22 no.4
• /
• pp.243-253
• /
• 2006

As the ocean and beaches have suffered from the losses of sand, it is necessary to monitor the zones that are prone to erosion continuously with the object of the long-term management. However, each ward offices are busy trying to supply sand without analyzing the marine and beach topographic changes. Therefore a long term effect of erosion has not been shown. In this study, we proposed methods to collect accurate spatial data of the oceans and beaches through sounding and GPS surveys, and detected and analyzed topographic changes quantitatively and qualitatively, by using an integrated RS and GIS techniques. The result of this study revealed that the marine topography has been eroded for 25 years, because of the straight construction of the river and the vast development of urban features, in addition with change of the mean depth 0.40 m, the water surface area 11,028 $m^2$, and submarine volume 2,207,884 $m^3$. The beach topography has accreted for 5 years and the change of the mean elevation is 0.27m, the area 6,501 $m^2$, and volume 25,667 $m^3$, because of the installation of geogrids and the seasonal effect. We conducted monitoring works on the topographic survey of the ocean and beaches and analyzed the present condition of the coastal erosions. Therefore, it is estimated that necessary information on the supply of sand, the safe marine leisure and the management of bating place could be provided.

• Korean Journal of Social Welfare Studies
• /
• v.49 no.2
• /
• pp.181-209
• /
• 2018

This study aims to examine the relationship between physical environment and depression symptoms of middle-aged and older adults in metro city. To verify correlates of community environment and depression, mediating effect model structured by social capital and sense of coherence(SOC) were used. For the purpose, a survey was conducted aged 48 - 70 from the local community centers and senior welfare centers in Seoul, and the total collected cases were 331. After data cleaning, total 309 cases were used. The structured equation modeling applied to analyse the direct and indirect effects. The findings were followed : First, the community environment did not directly affect level of depression. Second, in the indirect effect analysis, social capital was not statistically significant, thus indirect effect was confirmed only through the SOC. To be specific, the higher the satisfaction of the physical environment increased SOC, and decreased the level of depression. The results of this study shed lights on practical interventions to promote mental health of the middle-aged and older adults those who are exposed to poor community environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.520-520
• /
• 2016

석유 화학공장에서 발생하는 spent sulfidic caustic (SSC) 폐수는 액화석유가스(LPG)나 천연가스(NG)의 정제과정에서 발생되는 것으로 고농도의 sulfide와 cresylic, phenolic 그리고 mercaptan 등이 포함된 독성과 냄새를 유발하는 물질이다. 이러한 물질들은 LPG나 NG의 정제과정에서 높은 산도를 가진 휘발성 황화합 물질들을 제거하기 위해 사용된 NaOH가 $H_2S$와 반응하여 발생하는 것이다. 진한 갈색 또는 검은색을 띄는 SSC 폐수는 12 이상의 높은 pH를 가지고 있으며 5~12 wt%의 높은 염분도를 가지고 있다. 또한 강한 부식성과 독성을 가진 황화합물의 농도가 1~4 wt%이며, 방향족 탄화수소 물질 (i.e. methanethiol, benzene, tolune and phenol)들도 다량 함유되어 있다. 따라서 이러한 유해 물질들은 기존의 하수처리 공정으로 방류하기 전에 완벽하게 처리해야만 하수처리 공정의 오염 부하량을 줄일 수 있다. 습식산화공정은 SSC 폐수를 처리하기 위해 흔히 사용되고 있는 물리-화학적 처리 공정이지만 고비용, 고에너지가 필요하며, 고온 및 고압에서만 작동되어 안전상의 문제점을 갖고 있다. 또한 습식산화공정을 거친 폐수는 배출허용기준을 만족하기 위해 생물학적 2차 처리가 반드시 필요하다. 철-과산화수소를 이용하는 펜톤산화 공정, 그리고 sulfide를 sulfate로 전환시키는 생물학적 처리 공정은 황화합물의 완전한 무기물화가 힘들며, 현장 적용 시 기술적 경제적 부담이 크다. 이러한 단점을 극복하고, SSC 폐수를 효과적으로 처리하기 위해 본 연구는, 높은 흡착력과 광산화력을 가진 흡착광산화 반응 시스템(Adsorption Photocatalysis System, APS)을 개발하였다. APS는 SSC 폐수를 시스템 내부로 유입하여 수중의 오염물질을 흡착광산화제로 구성된 반응구조체가 흡착하고, 흡착된 오염물질을 UV에너지와 이산화티타늄 광촉매의 광화학반응에 의해 최종적으로 무해한 물질로 환원시키는 폐수처리시스템이다. APS의 반응구조체는 태양에너지 및 인공에너지원에 의해 활용 가능하며, 난분해성 유기화합물질을 물과 이산화탄소로 분해할 수 있는 친환경적이고 경제적인 소재로서 널리 쓰이고 있는 이산화티타늄 광촉매와 화력발전소의 높은 소성온도에 의해 연소된 후 발생되는 bottom ash를 이산화티타늄의 지지체로 사용하여 높은 흡착력과 광촉매 산화력을 가진 복합물이다. 개발된 APS에 의해 SSC 폐수를 처리한 결과, COD 86.1%, 탁도 98.4%, sulfide 99.9%의 높은 처리효율을 보여주고 있다. 따라서 본 연구를 통해 개발된 APS는 강한 부식성과 독성 그리고 높은 농도를 가지고 있는 SSC 폐수를 효과적으로 처리할 수 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.271-278
• /
• 2019

The corrosion of reinforcements embedded in concrete causes severe deterioration in reinforced concrete structures. As a countermeasure, epoxy coated reinforcements are used to prevent corrosion of reinforcements. When epoxy coated bars are used, the resistance of corrosion is excellent, but epoxy coating on the bars have a disadvantage of reduction in bond capacity comparing to that of normal bars. Therefore, it is necessary to confirm the bond performance of epoxy coated reinforcements through experimental and analytical methods. Bond behaviors of epoxy coated bars for various diameters of 13 and 19mm and thicknesses of cover concrete of 3 types(ratio of cover to bar diameter) are examined. As the diameters of the epoxy coated bars increase, the difference of bond strength between epoxy coated and uncoated bars also increases and damage patterns showed pull out failure. In addition, finite element analysis was performed based on the bond-slip relationship obtained by direct pullout test and compared with the flexural test results. It is considered that flexural member test is more useful than pullout test for simulating the behavior of actual structure.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.189-195
• /
• 2013

Recent trains have broadband train communication networks to improve train operation safety and to provide passengers with multimedia services. Compared to glass optical fiber, plastic optical fiber (POF) has a large diameter; it also provides the good durability and maintainability necessary to railway applications. This paper suggests an All-IP broadband train communication network that connects all devices in the train through a POF interface. Performance tests according to Korean railroad standards shows that this POF interface is usable in the range of vibration and temperature conditions encountered in trains. A dedicated Layer-2 switch with the POF interface is developed for the construction of the All-IP train communication network. A prototype 1Gbps train communication network was set up in a trial-run of train on a metro line using the developed Layer-2 switch and POF. On-track tests indicated the feasibility of the POF train communication network. POF has an additional advantage of economic feasibility, and it is expected to start a trend toward broadband train communication networks using POF.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.667-673
• /
• 2021

Purpose: The aim of this study is to analyze the trend for the dispatch of the 119 rescue teams to remove the beehive according to the distribution of temperature and time in Busan metropolitan city for 5 years from 2015. Method: From January 2015 to December 2019, 11 fire stations in Busan were dispatched and the source data of rescue and emergency activities were collected. The number of beehive removal dispatches was determined by the Busan Metropolitan Fire Station's jurisdiction over the past five years, and the temperature meteorological factors and honeycomb removal dispatches were analyzed in frequency and percentage. Result: The frequency of dispatch began to increase at an monthly average temperature of more than 20℃ and was higher at 23℃ to 29℃ than other temperature range. The highest frequency of dispatch was 7,900 cases in 2017. In particular, we found that the start timing of the honeycomb removal is getting faster as the year goes by. Gijang-gun had the largest frequency of dispatch, and Haeundae-gu, Geumjeong-gu, and Nam-gu were found to have a higher that. Conclusion: We found that the start timing of the honeycomb removal is getting faster as the year goes by and temperature changes. The results of this study are considered to be useful in future studies of wasps in urban areas.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.172-177
• /
• 2021

As part of the digital era, a digital twin that simulates the weak part of a product by performing a stress test that reduces the lifespan of some expensive equipment that cannot be done in reality by accurately moving the real world to virtual reality is being actively used in the manufacturing industry. Due to the development of IoT, the digital twin, which accurately collects data collected from the real world and makes it the same in the virtual space, is mutually beneficial through accurate prediction of urban life problems such as traffic, disaster, housing, quarantine, energy, environment, and aging. Based on its action, it is positioned as a necessary tool for smart city construction. Although digital twin is widely applied to the manufacturing field, this study proposes a smart city model suitable for the 4th industrial revolution era by using it to smart cities and increasing citizens' safety, welfare, and convenience through the proposed model. In addition, when a digital twin is applied to a smart city, it is expected that more accurate prediction and analysis will be possible by real-time synchronization between the real and virtual by maintaining realism and immediacy through real-time interaction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.76-83
• /
• 2021

This study examines the bending behavior of lap-spliced ultra-high-strength fiber-reinforced concrete members and evaluates the safety of the design codes for ultra-high-strength fiber-reinforced concrete structures. An experiment on a total of six beams was performed. The main variables were the fiber-inclusion and the lap-spliced length at the center of the beams. The steel fibers in a volume fraction of 2% were used, and the lap-splice lengths were determined to be 8db and 16db. As a result of the test, the specimens not reinforced with fiber lost abrupt load-bearing capacity at the lap region and did not experience yielding of the reinforcing bar. In the case of fiber-reinforced concrete, if a lap-splice length of 16db is secured, the yielding of the main reinforcing bar can be experienced, and appropriate flexural strength can be expressed. Based on the experimental results of this study, as a result of reviewing the lap-splice length calculation formulas of the current design standards and the ultra-high-strength concrete structural design recommendations, it was found that all of them were evaluated conservatively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.15-29
• /
• 2021

The signal intersection is the most challenging space for autonomous vehicles. To promote the safe driving of autonomous vehicles on urban roads with traffic signals, autonomous vehicles need to receive traffic signal information from infrastructure through V2I communication. Thus, a protocol for providing traffic signal information was added to the standard traffic signal controller specification of the National Police Agency. On the other hand, there are technical limitations when applying this to digital traffic signal controllers because the protocols are defined mainly for analog traffic signal controllers. Therefore, this study proposes developing a signal information linkage module to provide traffic signal information from a digital traffic signal controller to an autonomous vehicle and an algorithm improvement method that can provide accurate traffic signal information at the time of traffic signal transition.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.145-154
• /
• 2019

The purpose of this study is to analyze the self-status of fire service personnel to identify their effect on self-efficacy and job satisfaction, and to improve the performance of their tasks in the field and perform their tasks efficiently. A survey of 177 current firefighters in the southern city of Gyeonggi Province conducted a correlation analysis and regression analysis through SPSS 22.0. The first study found that in relation to the self-status factor and the self-efficacy factor of firefighting services, the self-efficacy is rather high and the self-regulating effect is very high. Second, the effects of the self-status factor on the self-efficacy were significant in order of type Adult (A), type Free Child (FC), and type Adapted Child (AC). Third, analysis of correlation between self-status factors and job satisfaction factors showed inadequate correlation in all job satisfaction factors for Critical Parent (CP) types, and static correlation in all job satisfaction for Nurturing Parent (NP) types. Type Adapted Child (AC) was less satisfying to itself, to itself, to pay, to promote, to co-workers. Thus, the current strategic approach based on rationality needs to be strengthened by lowering the authority of the Critical Parent (CP) function in terms of self-status factors and enhancing the Adapted Child (AC) function in the lower satisfaction level of the parent.