• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.63-70
• /
• 2006

This study aims to development of web-based process management system for spatial data construction. For developing this system work classification of basic surveying was standardized and quality management method for spatial data was established. Production process and work classification system for basic surveying such as control point surveying using GPS, leveling, aerial photographing, digital mapping, topographic mapping, digital elevation modeling, aerial photographic DB construction and digital orthophotomap was standardized. The status of the output and quality inspection for basic surveying project were analyzed, and the elements of quality inspection and data format for the type of outputs were analyzed. Based on standardized and analyzed contents, web-based process management system was developed after database and process was designed. The process management system consisted of process management, quality control, metadata management, and system management.

• Journal of KIISE
• /
• v.45 no.3
• /
• pp.242-250
• /
• 2018

For high-quality software development, it is necessary to detect and fix the defects inserted. If defect management activities are not properly performed, it will lead to the project delay and project failure due to rework. Therefore, organizations need to establish defect management process and institutionalize it. Process standard models handle defect management in the area of project monitoring and control. However, small organizations experience difficulties in implementing and applying defect management process in a real situation. In this paper, we propose a defect management process for small organization which is designed in accordance with the characteristics of a small projects such as few participants and short development period. The proposed defect management process will be based on a tool chain with open source software such as Redmine, Subversion, Maven, Jenkins that support a defect management process and SW Visualization in systematic way. We also proposed a way of constructing defect database and various methods of analyzing and controlling defect data based on it. In an effort to prove the effectiveness of the proposed process, we applied the process and tool chain to a small organization.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.209-215
• /
• 2021

Data quality management is an important issue these days. Improve data quality by providing consistent metadata. This study presents algorithms that facilitate standard word dictionary management for consistent metadata management. Algorithms are presented to automate synonyms management of database metadata through web dictionary crawling. It also improves the accuracy of the data by resolving homonym distinction issues that may arise during the web dictionary crawling process. The algorithm proposed in this study increases the reliability of metadata data quality compared to the existing passive management. It can also reduce the time spent on registering and managing synonym data. Further research on the new data standardization partial automation model will need to be continued, with a detailed understanding of some of the automatable tasks in future data standardization activities.

• Proceedings of the CALSEC Conference
• /
• 1998.10b
• /
• pp.447-456
• /
• 1998

ㆍ 전자상거래 소프트웨어 개발에 객체지향 방법론을 적용하여 소프트웨어의 유지보수성, 재사용성, 개발생산성 및 품질 향상 ㆍ 웹 기반 소프트웨어 기술을 적용하여 표준화된 사용자 인터페이스 설계기법을 활용 ㆍ 전자상거래와 관련된 각종 표준을 선택하고 응용하여 관련 데이터의 보관 및 유지, 문서 교환을 효율적으로 수행; 차후 별도의 소프트웨어에 대한 요구가 발생하더라도 필요한 데이터의 참조가 용이 ㆍ 전자상거래 소프트웨어를 위한 개발 프로세스를 제시함으로써, 프로세스 관리 및 개선이 용이(중략)

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.3
• /
• pp.142-149
• /
• 2007

A ubiquitous environment in construction should be developed integrating hardware and software systems. The objective of this paper is to study the feasibility of applying the RFID technology to the concrete pour process, and improve the effectiveness of data exchange A pilot system of u-CPS (Ubiquitous Concrete Pour System) has been developed to test the feasibility. The pilot can automatically generate the data for concrete pour work such as departure time, arrival time, concrete pour time. Construction managers can keep track of the progress of concrete pour work using the information. A case study was done for a building construction using the pilot system, the result of which demonstrated that the RFID-base system can help improve the effectiveness of data communication during the concrete pour process.

• Annual Conference of KIPS
• /
• 2004.11a
• /
• pp.291-294
• /
• 2004

최근 많은 기업에서는 프로세스 관리를 통한 제품 품질 향상에 많은 노력을 기울이고 있다. 프로세스 관리는 제품 개발과정의 가시성을 확보함으로써 제품 개발 후 발생할 수 있는 문제를 초기에 찾아내고 해결함으로써 제품 개발에 드는 비용과 공수를 효율적으로 관리할 수 있도록 한다. 측정활동은 프로세스 관리에 필요한 데이터 식별 및 분석을 통해 프로세스 관리에 필요한 정보를 제공해 줄 수 있으며. 이를 통해 효과적으로 프로세스를 관리할 수 있게 해준다. 본 논문에서는 국내외 많은 기업들에서 프로세스 개선 모델로 채택하고 있는 CMMI 를 기반으로 측정활동에 대해 연구하였다. CMMI 에서는 조직의 성숙도 수준에 따라 5 개의 레벨로 구성되어 있으며, 이 중 측정 프로세스 수립에 대해서는 레벨 2 의 MA(Measurement and Analysis) 프로세스 영역에서 제시하고 있다. 레벨 2 에서 수립된 측정 프로세스는 레벨 2 뿐만 아니라 레벨 3, 4, 5 에서도 지속적으로 수행되어야 한다. 하지만 CMMI 에서는 레벨에 따른 측정 프로세스 관리에 관해서는 언급하고 있지 않다. 이에 본 논문에서는 CMMI의 MA 프로세스 영역을 기반으로, 측정 관련 표준 및 모델을 분석하여 측정 프로그램을 수립하고, CMMI 에서 제시하고 있는 5 개의 성숙도 수준별로 측정 프로그램이 어떠한 차이를 보이는지를 연구하여, 최종적으로 CMMI 성숙도 수준별 측정 프로그램의 적용방안을 제시한다.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.2 s.2
• /
• pp.53-62
• /
• 2000

A concrete element is obtained through multi-steps, and its quality is affected by site conditions and control constituents of procedures. In these regards, in order to assure designed qualities of concrete and associated materials of the element good quality control method is necessary in various procedures. The existing quality control measures do not satisfy the requirements for the quality control activities at each production step. This study provides a more effective checklist for each phase of concrete work, which improves existing quality control checklist through extensive research on current practices and surveys from expertises. This paper also proposes the application of multi-facet codes to develop a customized checklist to improve the efficiency in field practices and the effectiveness in assuring the designed performance of concrete. This study finally provides a more effective checklist for each phase of concrete work by improving usability of the developed project sensitive matric quality control checklist through application experiments on construction project sites.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.3
• /
• pp.17-26
• /
• 2024

Quality management work at construction sites demands substantial time and effort, involving the preparation of documents in Excel, approval processes, and the execution of quality tests. These Excel-based tasks include printing quality test reports, performing quality tests, generating and approving test reports, and preparing management ledgers. This division of processes extends the duration of work and diminishes efficiency. Accordingly, a cloud-based construction site quality management system was developed to enhance the productivity of quality management work. The purpose of this study is to analyze the productivity of the construction site quality management system, which is in the early stages of implementation at construction sites. This study implemented the construction site quality management system at a road construction site and scrutinized subsequent alterations in the quality management workflow before and after the implementation. Additionally, a survey was conducted among quality control engineers to collect data on work time both before and after the introduction of the construction site quality management system. Based on the collected data, the Monte-Carlo simulation method was applied to analyze the productivity improvement effect of the construction site quality management system, and the results were presented. The results of this study can serve as foundational data for future research endeavors focused on the automation of quality management works.

• Annual Conference of KIPS
• /
• 2006.11a
• /
• pp.539-542
• /
• 2006

Personal Software Process (PSP)에서 개인 개발자들이 수행해야 되는 측정 및 분석 활동이 제시된다. 측정 및 분석 활동의 일관되고 지속적인 수행으로 개발자들은 소프트웨어 품질 향상, 보다 정확한 예측, 개인 역량의 객관적인 평가, 개인 프로세스의 정량적 관리 등의 이득을 얻을 수 있다. 측정 및 분석 활동에서 신뢰성 있는 데이터의 수집이 무엇보다 중요하다. 하지만, 데이터 수집의 높은 오버헤드(overhead)와 컨텍스트 스위칭(context switching)의 문제로 인하여 신뢰성 있는 데이터의 수집에 많은 어려움이 존재한다. 이러한 어려움을 감소시키기 위해 자동 데이터 수집 및 분석 기법이 연구되어 왔다. 본 논문에서는 기존의 자동 데이터 수집 및 분석 기법을 확장하여 웹 애플리케이션 개발에서의 개인 프로세스 데이터를 자동 수집 및 분석 하는 도구를 설명한다.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.319-324
• /
• 2015

This paper proposes an integrated management system for products of game software development. Those products generated over software life-cycle are generally huge in numbers, various in kinds and interconnected in relationships among them. Especially they are highly complex and tightly coupled each other because they are used to build another world which is composed of multi-modal data such as graphics, sound, logics and so on. Therefore it is critical to manage development products in an integrated manner to guarantee the quality of software. The proposed system is designed to provide project/requirement/configuration/traceability management capabilities and interfacing to CASE standards. To achieve the objective, it is based on data warehouse technologies which provide central repositories of heterogeneous data, multi-aspect reporting&analysis capabilities, traceability, verification, etc.