• Journal of Ginseng Research
• /
• v.32 no.4
• /
• pp.332-336
• /
• 2008

Red ginseng is classified according to outer form and the quality of internal tissue, and red ginseng below third grade can't be sold. Also there are many differences in price according to grade. So if inferior Red ginseng is sold, economic loss and claim take place. This research is done conducted to investigate the possibility of the non-destruction internal tissue investigation of red ginseng. It is observed and compared that MR image after getting MR image agrees with real cutting side in 10-13% water content of red ginseng. The MR image can be obtained to see the internal section of red ginseng with equal condition of time, temperature and slice thickness in spin echo pulse sequence. The MR signal of red ginseng is very weak, because it contains low water density. So it takes about 30 minutes with the measurement of single point image (SPI). But the suitable time to distinguish internal tissues is about 9 seconds in TE (Echo Time) 2.23 ms, TR (Repetition Time) 150ms. The image to discriminate internal tissues in 9 seconds can be obtained when slice thickness is 10 mm with changes of 3, 5, 10 mm. The image obtained after 30 minutes' boiling of 55 degrees has clearer image than that of normal temperature. It is thought that MR signal is stronger through active motion of water particles as temperature increases. With this method MR image of red ginseng can be obtained and characteristics of internal tissues can be observed in such a short time.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.339-352
• /
• 2016

The best way of investigating the physical and mechanical properties of subsurface materials is the combined interpretation of data from borehole geophysical surveys and geotechnical experiments with rock samples. In this study two surface seismic surveys with refraction and surface-wave method are alternatively conducted for downhole seismic surveys in test site for geological field trip in Jeungpyung, Chungbuk. P- and S-wave velocity structures are delineated by refraction and MASW (multichannel analysis of shear waves) methods, respectively. Possion's ratio section, reconstructed from P- and S-wave velocities, is correlated to the outcrop geological features consisting of reddish sedimentary rock, gray volcanic rock, and joints/fractures. In addition, rock samples representative for reddish sedimentary and gray volcanic features are geotechnically analyzed to provide physical, mechanical properties, and elastic modulus. Dynamic elastic moduli estimated from geophysical data is found to be higher than the one from geotechnical data. Reddish sedimentary rock characterized with low porosity and moisture content corresponds to the zone of low electrical resistivities and their small variations in the resistivity sections between the rainy and dry days. This trend suggests that the weathered gray volcanic rock and the nearby fractures with higher low porosity and moisture content are interpreted to be good carrier especially in rainy season.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.87-87
• /
• 2002

초음파기기를 이용한 난포란의 채란 기술은 유전적으로 우수한 수정란의 다량확보가 가능함으로써 가축개량에 널리 응용할 수 있다. 그러나 초음파유도 난포란의 채란은 무엇보다도 회수율과 회수한 난포란의 질적 등급의 개선이 이루어져야 할 것이다. 본 연구는 등지방층두께, 일당증체량, 근내지방도 및 배최장근 단면적에 연관된 DNA marker가 검정된 한우로부터 FSH(FOLLTROPIN-V, Vetrepharm, Canada)를 투여하여 FSH 투여전.후의 포의 발달율과 등급별 회수율을 조사하였다. 공시동물의 발정주기에 관계없이 매주 무처리와 채란 12시간 전에 FSH를 각각 l00mg 과 200mg을 근육 주사하여 난포란의 채취를 유토하였다. 난소내 난포란의 채란은 SONOACE-600형 (Medison CO., 한국) 초음파기기를 사용하여 모니터 상에 검게 나타나는 난포를 17-gauge needle (Cook, Australia) 로써 70mmHg로 유지된 regulated vacuum pump를 이용하여 모두 채란하였으며, 소난포는 손가락 촉지를 이용하여 채란하였다. 난포의 크기는(large : $\geq$6mm, medium : 2-6mm, small $\leq$2mm) 무처리구에서 small(56.6%), medium(33.0%), large follicles(10.4%) 순으로 나타났으며, 전체 난포수는 106(8.2$\pm$3.6개) 였다. FSH 200mg 투여구에서는 medium(47.5%), small(32.5%), large follicles(20.0%) 순으로 나타났으며, 전체난포수는 40(10.0$\pm$2.2개) 였다. FSH l00mg 투여구에서는 medium(45.6%), small(43.5%), large follicles (10.9%) 순으로 나타났으며, 전체 난포는 92(7.7$\pm$2.5개) 였다. FSH 투여전 초음파 image 상으로 관찰한 난포수와 FSH 투여 후 초음파기기와 손가락 촉지를 이용하여 난포의 발달 및 난포란의 채란율은 200mg 투여 구에서는 투여 전에 4.3$\pm$0.6개였으나 투여 후에는 9.3$\pm$2.1개로 증가하였으며, 채란율은 75.0% 였다. l00mg 투여구에서도 투여 전후에 각각 5.3$\pm$1.2개 및 8.2$\pm$2.3개였으며, 채란율은 81.6%였다. 난포란의 채란율은 무처리구에서 88.7%(7.2$\pm$3.9개)로 나타났으며, 회수한 난포란의 등급은 각각 0.0%(GI), 5.3%(GII), 28.T%(GIII), 66.0%(GIV)로 나타났다. FSH 200mg 투여구의 채란율은 87.5%(8.8$\pm$2.6개)로 나타났으며, 등급별회수율은 GI(2.8%), GII(8.6%), GIII(34.3%), GIV(54.3%)으로 나타났다. 뿐만 아니라 FSH 100mg 투여구에서도 회수율은 89.1%(6.8$\pm$5.2개)였으며, 등급별 회수율은 각각 GI(8.5%), GII(13.4%), GIII(43.9%), GIV(34.2%)로 나타났다.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.41-46
• /
• 2011

We investigated experimentally the properties of dust explosion through lycopodium particle clouds in a duct to provide the fundamental knowledge. Propagating dust flames in the vertical duct of 120 cm height and 12 cm square cross-section were observed by digital video camera and flame front is visualized using by PIV(Particle Image Velocimetry) system. As the result, when the same average dust concentration existed in the vertical duct, downward flame propagation was faster than the upward flame propagation, its rate increased with dust concentration in 300g/$m^3$. Post flames were caused by the ignition of unburned particles which flowed into the rear region of flame from passage between flame and duct wall, and they generated regardless of duct condition. Also, it was found that appearance frequency of post flames during dust flame propagations increased with the increase of dust concentration.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.25-32
• /
• 2012

The thickness of anti-freezing layer has been empirically determined using the frost depth obtained from the freezing index and has not been generally considered as a structural layer in pavement design procedure. In fact, the anti-freezing layer makes a role in structural layer and enables to reduce the total thickness of pavement system. The objective of this study is to develop the statistical regression model for evaluating the structural capacity of anti-freezing layer using Falling Weight Deflectormeter(FWD) test data in asphalt pavements. The FWD testing was conducted at the embankment, cutting, and boundary area of various test sections to estimate the structural capacity of anti-freezing layer in different foundation condition. It is observed from this testing that the center deflections of pavement structure with anti-freezing layer are smaller than those without anti-freezing layer ranging from 0.4 to 82.6%. To determine the variables of statistical model, the correlation study has been conducted between various FWD deflection indexes and the anti-freezing layer thickness. It is found that the ${\Delta}BDI$(%)(${\Delta}Basin$ Damage Index(%)) is highly correlated with anti-freezing layer thickness. The ${\Delta}BDI$(%) model were developed for evaluating structural capacity of anti-freezing layer using linear mixed-effect models.

• Journal of Trauma and Injury
• /
• v.26 no.2
• /
• pp.39-46
• /
• 2013

Purpose: Non-invasive blood pressure measurement is widely used as a pre-hospital triage tool for blunt trauma patients. However, scant data exits for using the mean arterial pressure (MAP), compared to the systolic blood pressure, as a guiding index. The aim of this study was to determine the association between adverse outcomes and mean arterial pressure (MAP) and to exhibit the therapeutic range of the MAP in adult blunt trauma patients. Methods: The electronic medical records for all trauma patients in a single hospital from January 2010 to September 2012 were retrospectively reviewed. Patients below 17 years of age, patients with penetrating injuries, and patients with serious head trauma (injuries containing any skull fractures or any intracranial hemorrhages) were excluded. Adverse outcomes were defined as one of the following: death in the Emergency Department (ED), admission via operating theater, admission to the intensive care unit, transfer to another hospital for emergency surgery, or discharge as hopeless. Results: There were 14,537 patients who met entry criteria. Adverse outcomes occurred for MAPs in range from 90 to 120 mmHg. Adverse outcomes were found, after adjusting for confounding variables, to occur increasingly as the MAP declined below 90 mmHg or rose above 120 mmHg. Conclusion: Not only lower but also higher mean arterial pressure is associated with increased adverse outcomes in adult blunt trauma patients. Thus, patients with a MAP above 120 mmHg should be considered as a special group requiring higher medical attention, just as those with a MAP below 90 mmHg are.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.9-21
• /
• 1999

The waterjet is very widely used today in propulsion system of high speed vessel but manufacturer is limited because of an efficiency and a difficulty of a manufacture on the inlet configuration of the waterjet. The importancy in designing the inlet configuration of the waterjet lies on the minimization of the cavitation which is largely affecting the efficiency. In this paper, the configuration analysis is carried out to find a optimum shape which is minimizing the cavitation using a two dimensional potential-based panel method with an inlet configuration of a flush type. Also, it is developed a direct design method finding an inlet configuration by a given pressure distributions. The numerically obtained optimum shape using this configuration analysis method show a good agreement compared to the Kashiwadani's results. It is carried out a direct design method over a lip and a ramp of an inlet configuration wish pressure distributions obtained a result of the configuration analysis and the results show a good agreement compared to original configuration.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.676-681
• /
• 2014

Licorice, widely used as a herbal medicine, has flavonoids such as liquiritin and its aglycone, liquiritigenin that show anti-oxidant and anti-inflammatory properties. Licorice flavonoid-loaded cellulose hydrogels were prepared as carriers for skin drug delivery, and their properties were investigated. The porous cellulose hydrogel was made by reacting cellulose with epichlorohydrin as a cross-linking agent in NaOH/urea(1~10%) solutions. Through studies on the rheological properties and water uptake of the hydrogel, a NaOH/urea(6%) solution was established as being optimum for the synthesis of the cellulose hydrogel containing liquiritin and liquiritigenin. Scanning electron microscopy (SEM) observations of a cross-section of the prepared hydrogel indicated its porosity. In particular, in skin permeation experiments using a Franz diffusion cell, hydrogel containing the licorice flavonoids showed remarkable transdermal permeation compared to the control group. These results indicate that porous cellulose hydrogel is a potential drug delivery system to enhance the skin permeation of licorice flavonoids.

• Korean Journal of Acupuncture
• /
• v.35 no.3
• /
• pp.130-138
• /
• 2018

Objectives : The purpose of this study is to explore patients' perceptions that deserve attention when designing core questions for a clinical practice guideline of Korean medicine(KM) for degenerative lumbar spinal stenosis (LSS). Methods : Patients who had been admitted to Pusan National Korean Medicine Hospital from November 1, 2015 to October 31, 2016 were invited to the survey. Patients were eligible if they were both clinically and radiologically confirmed as degenerative LSS. The structured questionnaire was distributed by mail and outpatient visits. Questions included types of experienced Korean/Western medical interventions for LSS, their perceived effectiveness on symptoms, the necessity for studies of KM for degenerative LSS, the types of KM interventions to be investigated and the types of outcome measures after treatments. Data were descriptively analysed. Results : Twenty of thirty-one invited participants responded to the questionnaire. Acupuncture and herbal medicine were the most frequently used KM interventions. Eighteen respondents reported that KM treatments were helpful for their improvement. Sixteen patients who mentioned that research on KM is needed chose acupuncture as the top priority(88%) among KM interventions. The most important outcomes in the view of nineteen respondents included functional recovery (68%) and pain relief (53%). Thirteen respondents (65%) replied that both short-term and long-term outcome were important for them. Conclusions : Our findings may have limited validity due to the small number of respondents and the potential selection and information bias. Further qualitative studies and large-scale surveys to comprehensively identify patients' views are warranted.