• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.838-839
• /
• 2011

The spherical motor is very valuable actuator, because the motor can operate as multi-degree of freedom rotation. Especially, the motor is useful machine for robot's joint by reason of high efficiency, compact size, high power, precise control, etc. These characteristics of spherical motor have to require continuously research. Therefore, in this paper, two different types of spherical motor are compared and double-airgap spherical motor as novel stucture is introduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.844-845
• /
• 2011

스피리컬 전동기의 적용대상인 기존의 다자유도 시스템은 다수의 전동기를 동시에 제어해야 하므로 제어성과 전력공급면에서 단점을 갖는다. 하나의 전동기로 다 자유도 시스템을 구현할 수 있는 스피리컬 전동기는 출력 밀도 측면에서 영구자석을 이용한 형태의 연구가 주로 진행되고 있는데, 세계적으로 기초연구 단계에 있다. 스피리컬 영구자석형 전동기를 구현하기 위해서는 회전자를 지지하면서 3자유도 구현이 가능한 구조적인 설계, 3자유도의 전동력의 발생 메커니즘 설계, 3차원 전자장 해석 및 제어알고리즘 구현이 필요하다. 회전축이 기울여진 상황에서 회전자계를 발생시키는 식이 보고되고 있으나 회전형 전동기와 달리 공증된 회전자계 식이 없는 상황이다. 본 연구에서는 전류벡터를 이용한 회전자계 식에 대한 연구를 진행하였다.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1385-1391
• /
• 2017

This work presents a synchronized on-line trajectory generation algorithm for mechanical system with multiple degrees-of-freedom. Proposed algorithm is designed to generate time-optimized trajectories and synchronized trajectories under the constraints such as maximum speed, acceleration, deceleration, non-zero initial velocity, etc. Also, because of small computation time, therefore this can be applied in real-time and it is easier to change the trajectory when an event occurs. We verified the feasibility through various trajectory generation.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.21-28
• /
• 2006

Vibration of a non-linear system with multiple degrees of freedom under random parametric excitations was evaluated by probabilistic method. The non-linear characteristic terms of system structure were quasi-linearized and excitation terms were remained as they were. An analytical method where the expectation values of square mean of error was minimized was used. The numerical results were compared with those obtained by Monte Carlo simulation. A linear congruential generator and Box-Muller method were used in Monte Carlo simulation. The comparison showed the results by probabilistic method agreed well with those by Monte Carlo simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.951-956
• /
• 2007

This paper suggests a high-speed control method which is suitable for multi-joint robots using a real-time stand-alone controller for general-purpose. The fast processing controller consists of a PCI Interface Board and 2-axe PWM drivers. The PCI Interface Board consists of 32-channel PWM output ports, 32-channel Encoder Counters, 32-channel A/D Converters and 48-channel Digital I/O ports, and all the I/O data transmissions are completed within 1ms. And The 2-axe PWM driver can be redesigned easily in order to embed in each link. Experimental implementations show that the high-speed control method can be used for the real-time control which is essential to controlling of multi-body robots such as humanoid robots. Especially, it is efficient for realizing the model-based motion control in demand of much calculation time by the high I/O communication speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.561-567
• /
• 2007

This paper deals with the numerical model of a bracing-friction damper system and its deployment using the optimal slip load distribution for the seismic retrofitting of a damaged building. The Slotted Bolted Connection (SBC) type friction damper system was tested to investigate its energy dissipation characteristic. Test results coincided with the numerical ones using the conventional model of a bracing-friction damper system. The placement of this device was numerically explored to apply it to the assumed damaged-building and to evaluate its efficiency. It was found by distributing the slip load that minimizes the given performance indicies based on structural response. Numerical results for the damaged building retrofitted with this slip load distribution showed that the seismic design of the bracing-friction damper system under consideration is effective for the structural response reduction.

• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.851-858
• /
• 2009

In this study, we propose a new input device using vision technology for positioning of multiple DOFs. The input device is composed of multiple Tags on a transparent table and a vision camera below the table. Vision camera detects LEDs at the bottom of each Tag to derive information of the ID, position and orientation. The information are used to determine position and orientation of remote target DOFs. Our developed approach is very reliable and effective, especially when the corresponding DOFs are from many independent individuals. We show an application example with a SCARA robot to prove the flexibility and extendability.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.34-40
• /
• 2004

In this paper, peliminary design procedure of magnetorheological (MR) dampers is developed for controlling the building response induced by seismic excitation. Hysteretic biviscous model which is simple and can describe the hysteretic characteristics of MR damper is used for parametric studies. The capacity of MR damper is determined as a portion of not the building weight but the lateral restoring force. A method is proposed for the optimal placement and number of MR dampers, and its effectiveness is verified by comparing it with the simplified search algorithm. Numerical results indicate that the capacity, number and the placement can be reasonably determined using the proposed design procedure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.828-833
• /
• 2003

Rigid plate elastically supported at the edges is modeled and the performance of the optimal vibration control under sinusoidal excitation is tested. The controller based on the linear quadratic regulator with output feedback is designed to control the multi-degree of freedom vibration. Relative weighting parameters are considered as design constraints to determine the limitation of maximum control force and state parameters. Control force calculated by proportional output feedback of the displacement and velocity is used to suppress the vibration induced by the sinusoidal external force. The active vibration control of vibrating plate by the LQR controller is examined through the numerical simulations that show the effectiveness of optimal control scheme on the three degrees of freedom structure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.39-42
• /
• 2000

Cutrent technological development toward miniaturization requires smaller components. These components usually generate complex multi-DOF motions other than simple 1-DOF motlon. Therefore it is essential to develop measurement methodology for 6-DOF motions. In this paper, a new 6-DOF measurement system for milli-struchlre is presented. This methodology basically employs the Optical Beam Deflection Method (OBDM) with a diffraction grating. A laser beam is emitted toward the difliaction grating which could be attached on the surface of a milli-structue and the incident ray is dif'||'&'||'acted in several directions. Among these difliacted beams, $0^{th}$ and $\pm$ $1^{th}4" order difkicted rays are detected by 4 Quadrant Photodiodes. From coordinate values fram each detector, we can get information for 6-DOF motions with lineariration method, Required resolutions for milli-struchue measurement are suh-micrometer in translation and arcsec in rotation. Experimental results indicate that proposed system has possibility to satisfy this requirement.