• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.110-118
• /
• 2004

In order to evaluate two-step treatment of PEG-freeze drying for highly-degraded waterlogged ash woods (Fraxinus PP.; ca. 5,700 BP), which were excavated from peat lands in western Korea, dimension stability was examined during 45 months after complete treatment. The samples pre-treated with PEG in water solution showed better dimensional stabilities than the ones with PEG in t-butanol(TBA) solution. It suggests that TBA reduced the flexibility of wood cells and overflying by TBA induced micro-checks during freeze drying. Micro-checks results in fragile wood structures and consequently, large shrinkage by moisture absorbances of high PEG contents during exposure in humid condition. The results suggest that PEG in water-solution treatment is better than PEG in t-butanol as pretreament for freeze drying of highly-degraded waterlogged ash woods.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1241-1249
• /
• 2011

There are TOA, TDOA and AOA method to estimate the position of the electromagnetic wave transmitter by using the multiple receivers at the fixed position. Among these methods, AOA method is suitable for the jammer localization system. Because TOA method can be adopted for the clocks of the transmitter and the receiver are synchronized each other, and TDOA method can be only adopted for a broad-band jamming signal. This paper, therefore, analyzes the characteristics of the AOA measurements and the sensitivity of the positioning performance according to the system design parameters. Based on the analyzed results, the jammer localization system to meet the desired performance is designed, and it has been checked that the positioning error for the jammer located at a distance of 10km is lower than 38m through the simulation results.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.76-82
• /
• 2011

Most previous work on network selection in heterogeneous wireless networks has concentrated on the quality of the network alone. Therefore, users are not satisfied with network quality based network selection due to different user preferences. To solve this problem, we proposes a QoE-aware network selection algorithm that is based on the consumption patterns of user preferences which is divided into normal user, cost-sensitive user, quality-sensitive user and video quality as well as network quality. As a result of experiments, cost-sensitive user and quality-sensitive user are satisfied with enhanced QoE by 36% and 3% from the proposed network selection algorithm compared to the normal user, respectively.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.348-351
• /
• 2012

4대강 살리기 사업 등 대형 사업의 건설 및 시행에 의한 환경적 영향에 대한 예측과 적절한 수질관리 대안을 마련하기 위해서는 적절한 수문 수질모델을 이용하는 것이 필수적이며, 국내 대형 국책 사업 또는 중요 환경영향평가에서는 계속적으로 수질모델이 사용되고 그 적용 범위는 더욱 증가 될 전망이다. 따라서 이들 수질 모델의 사용에 있어서 예측의 정확도 및 신뢰도를 제고하는 것은 매우 중요한 일이라 할 수 있을 것이다. 특히 4대강 살리기 사업에 의해 다수의 보가 하천 내에 건설되고 준설이 실시됨에 따라 하천 내의 수리 동역학적 특성 및 수질특성이 변화할 것으로 예상되며, 적절한 수질관리 대책을 수립하기 위해서는 사업에 의한 수리 및 수질 특성 변화를 예측하고 시나리오를 분석할 있는 모델링 시스템을 구축하는 것이 필수적이다. 따라서 본 논문에서는 보 건설에 따른 다양한 수리 및 수질 특성 변화를 예측하기 위해 모의 가능 모형들을 조사하고, 국 내외 적용사례 분석을 통해서 현재 가장 많이 적용되고 있는 모형들을 선별하였다. 이를 토대로 모형 별 성능을 비교 분석하여 모형별 적용성을 검토하였다. 검토결과 신설보 설치에 따른 하천 수리 특성의 변화, 부유물질 및 동반 오염물질에 의한 수질 변화 등의 고려가 가능하며, 동적상태 모형으로 하천에서의 불연속적인 흐름에 따른 모의, 수심방향으로의 모의가 가능한 EFDC 모형이 보 설치에 따른 국부적인 영향을 자세하게 파악하는데 가장 적절한 모형으로 파악되었다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.17-23
• /
• 2000

Wireless link has high bit error rate compared with wired link and many users share this limited bandwidth. So it needs more powerful error control code and efficient media access control(MAC) to provide multimedia service reliably. In this paper we proposed efficient MAC frame format based on TDMA using mini-slot for request access. The number of mini-slots is variable based on the result of collision in the previous frame. This dynamic allocation of request mini-slots helps resolve the contention situation quickly and avoids the waste of bandwidth that may occur when there are several unneeded request mini-slots. The simulation results are also presented in terms of channel utilization, call blocking probability and cell transmission delay for mixed traffic environment.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.261-269
• /
• 2003

Steel bridges, which have been damaged by load and corrosion, need repair or strengthening. In general, before the repair welding procedure, cutting procedure carry out. Therefore, the investigating of the behavior of stress generated by cutting is so important for safety of structure. Residual stress produced by gas cutting was analyzed using 2D and 3D thermal elasto plastic FEM. According to the results, the magnitude of temperature was analyzed by 2D FEM is smaller than that was analyzed using the 3D FEM program at the start and end edge of flange. And the magnitude and distribution of residual stress of perpendicular to the cutting line was analyzed by the 2D FEM program was similar to that was analyzed by the 3D FEM program. Therefore, it is possible to predict of cutting stress by 2D and 3D FEM.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.705-708
• /
• 2008

Diatomite, bentonite and zeolite were used as porous materials for fabricating hygroscopic panels. Moisture adsorption and desorption of porous materials were investigated and hydrothermal method was applied to fabricate panels. Cheolwon diatomite and Pohang zeolite showed excellent characteristics of moisture adsorption and desorption. These characteristics were caused by higher surface area and pore volume of porous materials. Moisture adsorption contents were influenced by surface area and pore volume of panels, and surface area more effected on moisture adsorption. Moisture adsorption content of panel with 10% Pohang zeolite was 180g/m$^2$and that of 10% Cheolwon diatomite was 170g/m$^2$. Moisture desorption content of panel with 10% Pohang zeolite was 105g/m$^2$. Moisture adsorption contents of panel with porous materials were higher than that of panel without porous materials.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.74-82
• /
• 2010

A government agency has been announced to increase 23,663 hundred million wons by cost of design change which occurred in the pre-construction and construction phase. As design change is a phenomenon to occur by means of a characteristic of the building design that standardization is difficult, even if it is said that a perfect design is done in design phase, design change is prevented, and it is going to decrease, and there is a limit. Because there are some causes in all of the construction project, it is change order of client, relative system, unfit design and field condition, etc. In this study, we are suggested logic and basic model of the decision making support process model that it should selecting the optimal alternative through complex and quantitative analyzed: that is cost, performance and constructability as respect Owner or CMr is executing project under the CM delivery system construction project which it occurred design change.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.41-46
• /
• 2019

In this paper, it is necessary to study the bandwidth and network system for efficient image transmission in the current era of drone imaging, and to design routing protocols to round out and cluster two or more multi-drones. First, we want to construct an ad hoc network to control the multidrone. Several studies are underway for the clustering of drones. The aircraft ad hoc network (FANET) is an important foundation for this research. A number of routing protocols have been proposed to design a FANET, and these routing protocols show different performances in various situations and environments. The routing protocol used to design the FANET is tested using the routing protocol used in the existing mobile ad hoc network (MANET). Therefore, we will use MANET to simulate the routing protocol to be used in the FANET, helping to select the optimal routing protocol for future FANET design. Finally, this paper describes the routing protocols that are mainly used in MANET and suitable for FANET, and the performance comparison of routing protocols, which are mainly used in FANET design.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.136-144
• /
• 2010

Two types of informations are used for content-based video copy detection: spatial information and temporal information. The spatial information means content-based image fingerprint. This image fingerprint must have following characteristic. First, Extraction is simple. Second, pairwise independence for random selected two images. At last, Robust for modifications. This paper proposed image fingerprint method for contents based video copy detection. Proposed method's extraction speed is fast because this method's using block average, first order differentiation and second order differentiation that can be calculated add and minus operation. And it has pairwise independence and robust against modifications. Also, proposed method feature makes binary by comparisons and using coarse to fine structure, so it's matching speed is fast. Proposed method is verified by modified image that modified by VCE7's experimental conditions in MPEG7.