• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.5-5
• /
• 2019

상수관망시스템은 정수장으로부터 각 수요처에 음용수를 공급하기 위한 사회기반시설물이며, 광범위한 지역에 걸쳐 주로 지하에 시설물이 매설되어 있다. 상수관망시스템을 설계하고 운영함에 있어 노후화로 인한 유수율 저하, 갑작스런 수요량의 증가, 관로 파손 등 비정상상황에의 용수공급을 항상 대비하여야 하며, 이를 통한 지속적인 관리와 개량이 필요하다. 상수관망시스템에서 발생할 수 있는 다양한 비정상상황들 중 상수관망시스템 내 관로가 파손될 경우, 파손 관로의 보수 혹은 교체를 위해서는 해당 관로의 용수흐름을 일시적으로 차단할 필요가 있다. 이 과정에서 파손관로와 인접한 밸브를 차폐하게 되며, 이로 인해 용수공급이 중단되는 단수구역이 발생하게 된다. 단수구역은 파손 관로를 차폐함으로써 파손 관로와 함께 용수공급이 차단되는 직접고립지역과 직접고립지역으로 인해 의도치 않게 수원으로부터 물 공급이 차단되는 간접고립지역으로 구분할 수 있다. 따라서, 관 파손에 의한 단수용량을 정확히 산정하기 위해서는 시스템 내 설치된 밸브의 개수와 위치에 따른 직, 간접고립지역(단수구역)을 정확하게 산정할 필요가 있다. Jun and Loganathan(2007)은 단수구역을 직접고립지역과 간접고립지역으로 구분하여 정의하고 각각을 탐색하는 알고리즘을 제시한 바 있다. 본 연구에서는 기존 연구에서 제시한 간접고립지역 탐색 방법의 문제점을 파악하고, 이를 개선한 새로운 알고리즘을 제안 및 검증하였다. 또한, 개선된 알고리즘을 이용하여 상수관망시스템 내 최적 밸브위치를 결정하기 위해 단수용량과 밸브설치비용을 동시에 최소화하는 다목적 최적화 모형을 개발하였으며, 예시 관망을 이용하여 모의를 수행하고 결과를 분석하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.74-81
• /
• 2019

Herein, we performed a comparative study on approximate multi-objective design optimization, to realize a structural design to improve the weight and vibration performances of the knuckle - a car suspension component - considering various load conditions and vibration characteristics. In the approximate multi-objective optimization process, a regression meta-model was generated using the response surfaces method (RSM), while Kriging and back-propagation neural network (BPN) methods were applied for interpolation meta-modeling. The Pareto solutions, multi-objective optimal solutions, were derived using the non-dominated sorting genetic algorithm (NSGA-II). In terms of the knuckle design considered in this study, the characteristics and influence of the meta-model on multi-objective optimization were reviewed through a comparison of the approximate optimization results with the meta-models and the actual optimization.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.2
• /
• pp.125-134
• /
• 2022

Recently, there are an increased the number of reports on the misuse or malicious use of an UAS. Thus, many researchers are studying on defense schemes for UAS by developing or improving C-UAS sensor technology. However, the wrong placement of sensors may lead to a defense failure since the proper placement of sensors is critical for UAS defense. In this study, a multi-object optimization model for C-UAS sensor placement in an air base is proposed. To address the issue, we define two objective functions: the intersection ratio of interested area and the minimum detection range and try to find the optimized placement of sensors that maximizes the two functions. C-UAS placement model is designed using a NSGA-II algorithm, and through experiments and analyses the possibility of its optimization is verified.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.93-102
• /
• 2010

In this study, a smart sky-bridge composed of MR damper and FPS has been proposed and vibration control performance of a smart sky-bridge for the connected buildings was investigated. To this end, 10-story and 20-story building structures connected by a smart sky-bridge were selected as example structures and El Centro and Kobe earthquakes, which have near and far fault ground motion characteristics respectively, were used for time history analyses. In order to effectively control the smart sky-bridge, fuzzy logic controller was developed and multi-objective genetic algorithm was used to optimize fuzzy logic controllers. Based on optimization results, it has been seen that there is a trade-off between seismic responses of 10-story and 20-story buildings and a suite of Pareto optimal solutions of fuzzy logic controllers for seismic response control can be obtained by multi-objective genetic algorithm. It is shown from numerical study that seismic responses of adjacent buildings can be efficiently controlled by using a smart sky-bridge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.219-224
• /
• 2016

The vibration control performance of a semi-active damper connected to adjacent buildings subjected to seismic loads was investigated. The MR damper was used as a semi-active control device. A fuzzy logic control algorithm was used for effective control of the adjacent buildings connected to the MR damper. In the buildings control coupled with a MR damper, the response reduction of one building results in an increase in the response in another building. Because of these conflict characteristics, multi-objective optimization is required. Therefore, a fuzzy logic control algorithm for the control of a MR damper was optimized using a multi-objective genetic algorithm. Based on numerical analyses, the semi-active fuzzy control of MR damper for adjacent coupled buildings can provide good control performance.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.132-140
• /
• 2002

By utilizing OSMI (Ocean Scanning Multi-spectral Imager) onboard KOMPSAT-1, the moon can be imaged. Because the moon has no atmosphere and reflects sun lights at a constant rate, it can be the radiance source for calibration of OSMI. But there are a lot of risks which made KOMPSAT-1 enter into safe-hold mode. So planning the imaging of the moon with OSMI should be determined seriously with consideration to information on KOMPSAT-1 operation, the moon, the sun, etc. But it takes a long time for determining the imaging time of the moon using MCE(Mission Control Element) simulator and there are operational problems to be solved. In this paper, fast simulator for determining imaging time for the moon with OSMI has been developed. The proper timeline for imaging the moon and the position of the moon image in OSMI image coordinates and the phase of the moon are determined. STK was used for acquiring information on KOMPSAT-1, the moon, the sun and the characteristitcs of OSMI are considered. As a result, we can determine imaging time of the moon with OSMI much faster and efficiently.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.321-321
• /
• 2004

본 연구에서는 웨이퍼 단면 연삭기 구조물의 경량화 고강성화 최적설계를 위하여 가변벌점함수 유전 알고리즘을 이용한 다단계 최적설계 방법을 적용하였다. 구조강성 최대화와 중량 최소화라는 상반된 성질의 목적함수를 최적화하기 위하여 강성의 역수 개념인 컴플라이언스(compliance)를 도입하여 목적함수론 최소화시키는 문제로 만들었으며, 가증방법(weighted method)을 이용하여 다목적 함수를 단일 목적함수로 변환시켰다. 부재 단면형상 최적화 단계와 정적설계 최적화 단계, 및 동적 설계 최적화 단계를 순차적으로 수행하는 다단계 최적설계를 방법을 연삭기 구조물의 최적설계에 적용하였다.(중략)

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2639-2641
• /
• 2003

유전자 알고리즘은 다윈의 자연선택설과 유전자의 진화 개념을 이용한 적응 탐색 알고리즘으로 적용하고자 하는 문제의 매개 변수를 유전자와 비슷한 데이터 구조로 부호화하고, 유전 연산자를 이용하여 문제의 해답을 찾는 알고리즘이다. 최근 유전자 알고리즘은 이러한 복수개의 목적 함수를 최적화 하기 위한 다중 최적화 문제를 위한 최적화 기술로서의 관심이 크게 다루어지고 있으며 전송 문제, 생산 공정 문제 계획 등과 같은 다목적 함수를 다루는 많은 응용 부분에 대해 적용되고 있다. 본 논문에서는 기본적인 다중 목적 함수용 예와 Gen과 Kim이 제안한 네트워크 신뢰도를 고려한 연결 비용과 메시지 지연을 고려한 이중 구속 통신망 설계 문제를 가지고 가중치 합과 여러 가지 파레토 방법들을 비교하고 연구 검토 하고자 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.1-11
• /
• 2021

POGO is a dynamic axial instability phenomenon that occurs in liquid-propelled rockets. As the natural frequencies of the fuselage and those of the propellant supply system become closer, the entire system will become unstable. To predict POGO, the propellant (oxidant and fuel) tank in the first stage is modeled as a shell element, and the remaining components, the engine and the upper part, are modeled as mass-spring, and structural analysis is performed. The transmission line model is used to predict the pressure and flow perturbation of the propellant supply system. In this paper, the closed-loop transfer function is constructed by integrating the fuselage structure and fluid modeling as described above. The pogo suppressor consists of a branch pipe and an accumulator that absorbs pressure fluctuations in a passive manner and is located in the middle of the propellant supply system. The design parameters for its design optimization to suppress the decay phenomenon are set as the diameter, length of the branch pipe, and accumulator. Multiple-objective function optimization is performed by setting the energy minimization of the closed loop transfer function in terms of to the mass of the pogo suppressor and that of the propellant as the objective function.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.143-150
• /
• 1999

Multipurpose fisheries base was conceptually designed to establish marine ranching system in the coastal waters around Tongyoung, southern sea of Korea. Fisheries base for marine ranching system has integrated various facilities which were required for the process of spawning, rearing, training, releasing, monitoring and catching functions. This base has five steel piles for supporting upper structure and systems. Four steel piles are surrounded by circular net pen made by steel wire, they have the function of the protection against fouling for pile and scouring for bottom soil as well as secondary rearing and short stocking. We can use the last pile to moor a ship and access to the base. Principal structure with steel piles is designed by optimization technique considering design external forces in the coastal waters of return period of 50 years. Design optimization Problem is formulated for this base. Optimal design of multipurpose fisheries base is numerically investigated by sequential quadratic programming method.