• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.63-63
• /
• 2004

구동 및 동력 전달용으로 많이 쓰이는 기어장치는 최근 고속도비에서 사용이 증가함에 따라 다단기어장치의 설계에 대한 관심이 높아지고 있다. 하지만 다단 기어장치의 설계는 장치의 파손확률을 고려하지 않고 정적인 하중과 균일한 강도를 유지하는 차원에서 접촉해석과 강도설계 등이 주류를 이루었으며 대부분 설계자의 경험과 감각에 의해 시행착오적이고 반복적인 방식으로 이루어지고 있다. 또한 임의의 시간에서 다단 기어장치가 설계자의 의도대로 작동할 확률인 신뢰성에 대한 연구가 미흡하였다.(중략)

• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.201-209
• /
• 2019

Bottom-up multi-stage pressure grouting is widely applied to domestic slopes and tunnels. It involves injecting earth from the ground to the surface after drilling. Various reports of construction performance have demonstrated its wide applicability. However, little research has studied top-down multi-step pressure grouting in Korea, which involves injection from the surface. This paper compares the grouting effect of both the established bottom-up method and the top-down method in soil box and field tests. The soil box test showed that the bulb volume of the top-down method is ~24% less than that of the bottom-up method. The field test confirmed that the top-down method has a wider grouting range and a higher injection density per area than the bottom-up method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.576-584
• /
• 2016

In this study, AP added propellant has been proposed as a method of enhancing the low specific impulse performance found for staged hybrid rocket engine. Experimental tests were carried out to analyze and evaluate the effect of AP added propellant on specific impulse performance as well as fuel-rich combustion characteristics in a staged hybrid rocket engine. Upper limit of AP content in propellant was set to be 15 wt% to maintain the hybrid rocket engine advantages. As a result, 15 wt% AP added propellant showed 3% higher specific impulse performance compared to 0 wt% AP added propellant. Moreover, AP addition proved to offer less injected oxidizer mass flow, less O/F variation, and less combustion pressure while producing fuel-rich gas of the same combustion temperature. Future studies will carry out more combustion tests with metal additives to further enhance specific impulse.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.7-11
• /
• 2000

본 논문에서는 불완전 동기(Imperfect Synchronization)로 인한 칩 동기 에러(timing errors)와 위상 에러(phase errors)를 고려 하여 비동기(Asynchronous) DS-CDMA 시스템의 성능을 이론적으로 분석하였다. 성능 개선 기법으로는 다단 간섭제거기 (Multistage PIC)와 부분 다단 간섭제거기(Partial Multistage PIC)를 채용하였고 칩 동기 에러와 위상 에러가 두 간섭제거기의 간섭제거능력에 미치는 영향의 정도를 정량적으로 분석하였다. 성능분석 결과로부터 칩 동기 에러와 위상 에러로 인한 1단(no cancellation)에서의 성능 열화가 각 단의 상관기 출력(decision statistic)에 영향을 줌으로써 다단 간섭제거기와 부분 다단 간섭제거기의 성능 개선폭을 감소시켰다. 그렇지만, 불완전 동기에도 불구하고 단(stage) 수가 증가할수록 두 간섭제거기 모두 강한 간섭제거능력을 보였다. 실제 시스템에서는 성능 개선과 구현상의 복잡도를 동시에 고려해야하므로 다단 간섭제거기 보다 구조가 간단하고 계산량이 적은 부분 다단 간섭제거기의 활용도가 높아질 것이 예상된다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.500-501
• /
• 2010

본 논문에서는 출력전압레벨수를 증가시키기 위한 방안으로 3의 n승비의 입력전압원을 가지는 비절연방식과 동일한 레벨 형성을 위해 변압기 이차 측을 직렬로 결합시킨 절연 방식의 멀티레벨 인버터의 특성을 비교 분석한다. 두 회로는 동일하게 3의 배수의 전압원을 가감하여 선형적인 출력 전압 레벨을 형성할 수 있다. 다단 변압기를 적용하는 방식은 하나의 입력전압원을 가지고 변압기의 권선비를 3의 배수로 설계하여 출력전압의 순시치가 다단의 출력전압 레벨을 형성하는 개념이며, 제안된 방식은 전압원이 3의 배수 형태로 이루어진 경우 동일한 출력전압 레벨을 생성시킬 수 있는 구조이다. 따라서 제안된 구조가 회로 소자수 측면과 효율 특성에 있어 보다 우수한 특성을 가지게 된다. 두 회로의 비교 분석을 위한 시뮬레이션을 수행하고 타당성을 검증한다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.557-562
• /
• 2023

This study reviewed the use of soil injection materials using circulating resources as injection materials for the steel pipe multi-stage construction method. The tests performed were homogel time and homogel compressive strength. The steel pipe multi-stage construction method is an auxiliary construction method for tunnels, and the expression of initial strength after construction is an important factor. The better the strength development in the initial stage, the more it can be used as an injection material suitable for the multi-stage steel pipe construction method. As a result of laboratory test, it was found that the homogel time of the injection material using circulating resources required more time than the mixing ratio using cement as the injection material. In addition, it was found that the initial strength curing time satisfying 2MPa was required for more than 24 hours. Therefore, it was confirmed that the injection material using recycled resources required a longer initial curing time than cement of the same mixing ratio.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.10
• /
• pp.637-644
• /
• 2016

The purpose of this study is to understand the characteristics of unburned carbon (UBC) and NOx emissions for pulverized coal when air staging combustion is applied. A two-staged drop tube furnace capable of applying air staging combustion was designed and installed. The combustion of sub-bituminous (Tanito) has been investigated. UBC and the NOx concentration were measured under various temperatures and stoichiometric ratios in unstaged and staged combustion. As a result, UBC decreased and the NOx concentration increased with an increase in stoichiometric ratio and temperature. In particular, the NOx reduction mechanism was activated when the temperature in the fuel rich zone increased. Both UBC and the NOx concentration decreased as the temperature increased in the fuel rich zone. A high NOx reduction effect was obtained, compared to the UBC increase, when the air staging technique was applied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2001

In this paper, a multistage parallel interference canceller (MPIC) and a partial multistage parallel interference canceller (PMPIC) are employed as a technique for improving the performance of the asynchronous DS-CDMA systems. The degree of the effect of the timing errors and phase errors on the interference cancellation capability of two types of cancellers is theoretically analyzed and the computer simulation is performed to confirm the analytical results. From the results, the large performance improvement is obtained by employing MPIC and PMPIC with perfect synchronization over the conventional matched filter, and the performance improvement obtained by MPIC and PMPIC is very close to each other as the number of the stage of MPIC and PMPIC increases. When the timing errors and phase errors are considered (in the case of imperfect synchronization), the performance improvement reduces as the performance degradation at the first stage (no cancellation) has a bad effect on the decision statistics at each stage. However MPIC and PMPIC have the strong interference cancellation capability in spite of imperfect synchronization as the number of the stage increases. An interference canceller, which has the strong interference cancellation capability as well as lower complexity for the implementation, is needed for practical systems with timing errors and phase errors because the perfect synchronization is impossible. Therefore, the excellent tradeoff between complexity and performance offered by PMPIC makes it an attractive approach for practical systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.97-102
• /
• 2012

In this paper, each electrical length and harmonics of the multi-stage SIR are calculated by using the input impedance for the variable application of SIR in the microwave systems. The size reduced ratio of the SIR is slightly reduced as increasing of the number of stage. The impedance ratio between lower and higher impedance of the SIR has the dominant effect on the size reduced ratio and harmonic characteristics. Also the equivalent impedance of the SIR is a geometric mean between lower and higher impedance and the quality factor of the SIR is similar to the half-wavelength resonator's.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6A
• /
• pp.929-938
• /
• 2001

CDMA 2000 1X EV.(HDR, 1XTREME, LAS-CDMA)에서는 고속데이터 전송을 위한 변조방식으로 M-ary QAM을 제안하고 있다. 그러나, M-ary QAM을 사용한 DS-CDMA 시스템은 고속 데이터 전송이 가능한 반면에 M-ary 수가 증가할수록 잡음(AWGN)과 타 사용자에 의한 다중접속간섭(MAI)의 영향이 커져 비트에러율(BER)이 증가하고 채널용량이 급격히 줄어드는 문제점이 있다. 따라서, DS-CDMA/M-ary QAM 시스템에서 많은 사용자에게 고속의 데이터 서비스를 제공하기 위해서는 잡음을 줄이거나 MAI를 경감시킬 수 있는 성능 개선 기법이 요구된다. 본 논문에서는 성능 개선 기법으로서 다단병렬간섭제거기(MPIC : Multistage Parallel Interference Canceller)와 부분 다단병렬간섭제거기(partial MPIC)를 채용한 비동기 DS-CDMA/M-ary QAM 시스템의 성능 개선을 이론적으로 분석하고 이를 검증하기 위한 컴퓨터 시뮬레이션을 수행하였다. 결과에서, MPIC와 partial MPIC를 채용함으로써 4 QAM, 16 QAM 및 64 QAM을 사용한 DS-CDMA 시스템의 BER과 채널용량이 크게 개선됨을 확인하였다. MPIC를 채용한 경우는 AWGN 채널의 BER에 근접하였다. 또한, MPIC는 partial MPIC보다 BER 성능이 우수하였으며 더 많은 채널용량 개선을 달성하였다. 그러나, MPIC는 partial MPIC 보다 계산량이 훨씬 많고 복잡한 구조를 갖기 때문에 실제 시스템 구현에 있어서 성능과 복잡도 사이에 타협(tradeoff)이 필요하다.