• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.333-336
• /
• 2007

A Strained Layer Multiquantum-Well (SL-MQW) distributed feedback laser at a wavelength of 1.31 um operating from $-40^{\circ}C$ to $85^{\circ}C$ without any cooling is grown by metal-organic chemical vapor deposition (MOCVD). Lasers with high slope efficiency are achieved through careful optimization of a SL-MQW active layer, especiallyoptimizing the amount of strain, the well thickness, the barrier thickness, the number of wells, and the active layer width. In this paper, we obtain the slope efficiencies of 0.38[mW/mA] and 0.26 [mW/mA] at $25^{\circ}C$ and $85^{\circ}C$, respectively. Threshold currents are 7.1[mA] and 19.8[mA] at $25^{\circ}C$ and $85^{\circ}C$, respectively.

• Applied Biological Chemistry
• /
• v.40 no.3
• /
• pp.220-224
• /
• 1997

As corn starches with different amylose content were heated at different temperature $(100^{\circ}C,\;121^{\circ}C)$ with starch / water ratio (1:3.5, 1:9) and heating-cooling treatment was repeated up to 4 times, the yield of RS(resistant starch) from heated corn starches was investigated by the enzymatic-gravimetric method and the ${\alpha}-amylase$ treatment. Compared to ${\alpha}-amylase$ method, enzymatic-gravimetric method was more effective to hydrolyze the amorphous region of heated corn starch. With increasing the amylose content and the number of heating-cooling treatment, the yield of RS increased, regardless of isolation method. Heated corn starches formed at $121^{\circ}C$ provided higher yield of RS than those formed at $100^{\circ}C$. Higher RS yield was also observed in the case of starch/water ratio (1:3.5) compared to the case of ratio (1:9).

• Korean Journal of Optics and Photonics
• /
• v.28 no.5
• /
• pp.241-249
• /
• 2017

This paper presents the design and evaluation of the optical system for an uncooled thermal-imaging camera. The operating wavelength range of this system is from $7.7{\mu}m$ to $12.8{\mu}m$. Through optimization, we have obtained a LWIR (Long Wave Infrared) optical system with a focal length of 5.44 mm, which consists of four aspheric surfaces and two diffractive surfaces. The f-number of the optical system is F/1.2, and its field of view is $90^{\circ}{\times}67.5^{\circ}$. The hybrid lens was used to balance the higher-order aberrations, and its diffraction properties were evaluated by scalar diffraction theory. We calculated the polychromatic integrated diffraction efficiency, and the MTF drop generated by background noise. We have evaluated the thermal compensation of a LWIR fixed optical system, which is optically passively athermalized to maintain MTF performance in the focal depth. In conclusion, these design results are useful for an uncooled thermal-imaging camera.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1995.10a
• /
• pp.146-151
• /
• 1995

원자력, 화력발전소 및 임해공업시설로부터 방출되는 냉각용 온수는 하천 또는 연안일대의 수계환경에 전반적인 수중온도의 상승과 가동 중단시 갑작스러운 수온 저하 등의 열균형 파괴를 가져온다. 따라서 여러가지 형태의 주위수에 영향을 받는 온배수의 이동 및 확산에 대한 정성, 정량적 예측을 위한 수치모델의 개발은 환경관리 및 생태계 보전 측면에서 매우 중요하다. (중략)

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.66-72
• /
• 2002

This paper describes numerical modeling for thermal characteristic of vapor-cooled current leads under pulse operation. The transient thermal analysis considers the temperature difference between a helium gas (low and a copper lead and temperature dependent properties of helium gas, copper and stainless steel. This numerical modeling was compensated and validated by an experiment with commercially available 100 A vapor-cooled current leads. A proper overloading factor was suggested for the current leads under pulse operation through this modeling, which can significantly reduce heat input to a cryostat.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.52-54
• /
• 2002

저온균열은, 대한용접학회에서 발간한 '용접.접합용어사전'에 의하면, '용접 후 용접부의 온도가 대체로 $200^{\circ}C$ 이하의 저온에서 발생하는 균열을 총칭한다. 경우에 따라서는 실온까지 냉각한 후 일정한 기간이 경과한 후에 발생하기도 하며, 이러한 균열을 지연균열(delayed cracking)이라고 한다'로 되어 있다. 이들 저온균열의 발생에는 주로 구속응력과 경화조직 및 확산성수소가 영향을 미치고 있으며, 그 종류는 위에서 언급한 지연균열 외에 라멜라 테어링, 변형균열, 칭균열형 저온균열 등이 있다. 본 기술강좌에서는 용접부의 저온균열에 대하여 지연균열과 그 외의 저온균열로 나누어 2회에 걸쳐 소개하기로 한다.하기로 한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.566-567
• /
• 2012

본 논문에서는 산성수를 전기분해하여 알칼리 이온수를 생성하는 정수 시스템을 제안하였다. 시스템은 크게 전해조, 냉각 유닛, 콤프레서, 정수?터 등으로 구성되어 있다. 특히 알칼리이온수를 생성하기 위해서는 전기분해를 위한 전력변환 회로가 필요하다. 본 논문에서는 알칼리이온수기를 위한 전해조 구동회로를 PSIM을 통한 검증 하였다.

• Design & Manufacturing
• /
• v.8 no.1
• /
• pp.10-13
• /
• 2014

Plastic products are producted more than 70% of total processes by the injection molding. The injection molding process has 4 processes such as filling, packing, cooling and ejecting. It spends most of times in the cooling process. Therefore, it is important to control the mold temperature in producing plastic products. The time and system of cooling affect the product's quality and productivity. Especially, cooling time has about 60% of total injection cycle time. Therefore, we can improve a productivity by shortening cooling time. This study shows comparative study about cooling efficiency of spiral channel and baffle and observed the variation of time to freeze of molding As the result of CAE experiments, cooling rate by spiral channel had faster than baffle and as freeze time was decreased. Results of this study will be used widely to design for cooling system of injection mold.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.383-386
• /
• 1997

Maize starches with different amylose content were repeated autoclaving-cooling cycles up to 4 times, and the yield of resistant starch (RS) from autoclaved maize starches was investigated by enzymatic-gravimetric method and ${\alpha}-amylase$ treatment. With increasing amylose content in starch and the number of autoclaving-cooling cycles, RS yield was also increased, regardless of isolation method. Enzymatic-gravimetric method severely hydrolyzed amorphous region of autoclaved maize starches. Crystalline region was obtained more effectively by enzymatic-gravimetric method than by ${\alpha}-amylase$ treatment.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1816-1817
• /
• 2011

원자력발전소의 금속파편감시계통(LPMS : Loose Parts Monitoring System)은 원자로냉각재계통 내부에 존재할 수 있는 금속 이물질과 구조물 이완부에 의한 충격신호를 조기에 검출하여 원자로 구조물 및 핵연료 손상, 제어봉 구동장애 등을 미연에 방지하여 발전소 안전운전을 담당하는 중요 감시설비이다. LPMS는 금속 이물질이나 구조물 이완부에 의한 충격신호를 검출하기 위해 충격파에 민감한 가속도계를 원자로냉각재계통 중 금속파편이 자연적으로 모일 수 있는 각 구역의 표면에 최소 2개 이상 설치되어 있다. 원전은 규제요건에 따라 설비의 건전성 확인을 위해 24시간, 7일, 31일, 91일 마다 각 1회의 설비 건전성 시험을 수행하며, 계획예방정비기간 중에는 가속도계 주변에서 강구나 스프링 타격기를 이용한 충격시험을 통해 설비 전체의 건전성을 확인하고 있다. 설비 건전성 확인을 위해 경상운전 중에 수행하는 설비 건전성 시험에는 설비 특성상 가속도계 및 전치증폭기의 건전성을 확인할 수 없다. 따라서 본 논문에서는 경상운전 중 가속도계와 전치증폭기의 건전성을 확인할 수 있는 기법을 제시하고자 한다.