Investigation on vapor-cooled current leads operating in pulse mode

펄스 모드로 작동하는 증기냉각 전류 도입선에 관한 연구

  • 인세환 (한국과학기술원 기계공학과) ;
  • 정상권 (한국과학기술원 기계공학과)
  • Published : 2002.05.01

Abstract

This paper describes numerical modeling for thermal characteristic of vapor-cooled current leads under pulse operation. The transient thermal analysis considers the temperature difference between a helium gas (low and a copper lead and temperature dependent properties of helium gas, copper and stainless steel. This numerical modeling was compensated and validated by an experiment with commercially available 100 A vapor-cooled current leads. A proper overloading factor was suggested for the current leads under pulse operation through this modeling, which can significantly reduce heat input to a cryostat.

Keywords

References

  1. Sperconducting Magnets Martin N. Wilson
  2. MT-15 proceedings Beijing China Overloaded current leads Andrew V. Gavrilin
  3. Heat transfer at low temperatures Walter Frost
  4. Journal of heat transfer Laminar free convection from vertical cylinders with uniform heat flux H.R. Nagendra
  5. Numerical heat transfer and Fluid flow Suhas V. Patankar
  6. ASM Handbook v.2 ASM handbook committee
  7. Handbook on materials for superconducting machinery Metals and ceramics information center
  8. Handbook of chemistry and physics Robert C. Weast
  9. Cryogenic systems Randall F. Barron
  10. Plenum Press Case studies in superconducting magnets design and operational isues Yukikazu Iwasa
  11. Cryogenic systems Randall F.Barron
  12. Case studies in superconducting magnets design and operational isues Yukikazu Iwasa